IGS-6416XSFP
6Pages

Industrial 10G Uplink Managed Ethernet Switches IGS-6416XSFP 16 10/100/1000T + 4 1G/2.5G/10G SFP+ L2+ Industrial Managed Ethernet Switch w/ Enhanced G.8032 Ring; 24V/HV input models  Auto-sensing triple speed1G/2.5G/10G SFP+ Uplink Cage Enhanced G.8032 ring covers multicast packets; MSTP 8/16* MSTI /RSTP ; support MRP ring**Miss-wiring avoidance & node failure protection Support IEEE 1588 v2 one-step PTP w/transparent clock Miss-wiring avoidance & node failure protection User friendly UI, including auto topology drawing and DDM threshold monitoring with dB values***; Complete CLI Support LACP link aggregation, IGMP v3/router port, DHCP server & DHCP Option82; Port based DHCP distribution, Mac based DHCP server, QoS by VLAN**, SSH/SSL, HTTPS, INGRESS/EGRESS ACL L2/L3,TACACS+, QinQ**, SMS** Dual isolated Input voltage 9~60VDC (24V model); Single isolated input power 90~305VAC/120~430VDC (HV model) Environmental Monitoring for temp., voltage & current Wide range operation temperature (-E model):-40~75C/-40~167F; Fan-less design OVERVIEW Lantech IGS-6416XSFP is a high performance L2+ (All Gigabit) Ethernet switch with 16 100/1000T + 4 1G/2.5G/10G auto sensing SFP+ which provides L2 wire speed and advanced security function for network aggregation deployment. It delivers ITU G.8032 enhanced ring recovery less than 20ms in single ring. It also supports train ring*, enhanced mode with easy configuration, comprehensive QoS, QoS by VLAN, advanced security including INGRESS/EGRESS ACL L2/L3, TACACS+, SSH/SSL, Mac based DHCP server, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port, QinQ** which are important features required in large network. The Cisco Discovery Protocol (CDP) and LLDP are supported for Ciscoworks to detect the switch info and show on L2 map topology. The enhanced platform allows quick booting up time under 50 seconds. Miss-wiring avoidance, Loop protection, Repowered auto ring restore The IGS-6416XSFP also embedded several features for stronger and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Lantech IGS-6416XSFP is able to alert with the LED indicator and disable ring automatically. Repowered auto ring* restore function (node failure protection) ensures the switches in a ring to survive after power breakout is back. The status can be shown in NMS when each switch is back. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection. DHCP option 82 & Port based, Mac based DHCP, Option66, IPv6 DHCP server** DHCP server can assign dedicated IP address by MAC or by port (Port based for single switch), it also can assign IP address by port for multiple switches with single DHCP option82 server. For the ending device which need to download file from TFTP server, DHCP Option66 server can offer IP address of TFTP server to DHCP client. Optional IPv6 address resolution for DHCP service can be supported. User friendly GUI, Auto topology drawing Datasheet Version 1.4

Lantech' Pioneering Industrial and IP Networks Industrial 10G Uplink Managed Ethernet Switches The user friendly UI, innovative auto topology drawing and topology demo makes IGS-6416XSFP much easier to get hands-on. The complete CLI enables professional engineer to configure setting by command line. Enhanced G.8032 ring, 8/16** MSTIMSTP; MRP ring Lantech IGS-6416XSFP features enhanced G.8032 ring which can be self-healed in less than 20ms for single ring topology protection covering multicast packets. It also supports various ring topologies that covers enhanced ring and basic ring by easy...

Lantech' Pioneering Industrial and IP Networks Industrial 10G Uplink Managed Ethernet Switches Supports IEEE 802.1ab LLDP, Cisco CDP; LLDP info can be viewed via Web/ Console DHCP server / client / DHCP Option 82 relay / DHCP Option 82 server; Port based DHCP server; DHCP Option 66; IPv6 address resolution for DHCP server** Mac based DHCP server to assign IP address that includes dumb switches in DHCP network Bandwidth Control ■ Ingress packet filter and egress rate limit ■ Broadcast/multicast packet filter control Relay alarm output system events Miss-wiring avoidance ■ LED indicator...

Industrial 10G Uplink Managed Ethernet Switches SPECIFICATION Hardware Specification Switch Architecture IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-TX IEEE802.3ab 1000Base-T IEEE802.3z Gigabit fiber IEEE802.3x Flow Control and Back Pressure IEEE802.3ad Port trunk with LACP IEEE802.1d Spanning Tree IEEE802.1w Rapid Spanning Tree IEEE802.1s Multiple Spanning Tree IEEE802.3ad Link Aggregation Control Protocol (LACP) IEEE802.1AB Link Layer Discovery Protocol (LLDP) IEEE802.1X User Authentication (Radius) IEEE802.1 p Class of Service IEEE802.1Q VLAN Tag Back-plane (Switching Fabric): 112Gbps...

Lantech' Pioneering Industrial and IP Networks Industrial 10G Uplink Managed Ethernet Switches Port Trunk with LACP Environmental Monitoring Network Security RFC 1157 SNMP MIB, RFC 1493 Bridge MIB* RFC 1573 IF MIB RFC 2674 VLAN MIB*, Partial RFC 1757 RMON, RFC 2674 Q-Bridge MIB*; Bridge MIB, LLDP MIB RSTP MIB* Private MIB Support ITU G.8032 v2/2012 for Ring protection in less than 20ms for self-heal recovery (single ring enhanced mode) Support basic single ring & enhanced ring Enhanced G.8032 ring configuration with ease Cover multicast & data packets protection Support hardware-based...

Lantech' Pioneering Industrial and IP Networks DIN Rail Power ■ NDR-480 series 480W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C) ■ NDR-240 series 240W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C) ■ NDR-120 series 120W Single Output Industrial Din Rail Power;...