IGS-5488MGSFP
6Pages

Industrial Gigabit Managed Ethernet Switches IGS-5488MGSFP 8 10/100/1000T + 8 100M/1G SFP + 4 1G/2.5G SFP w/ L2+ Industrial Managed Ethernet Switch w/ Enhanced G.8032 Ring; 24V/HV input models   Dual isolated input 9V~60VDC voltage (24V model) or Single isolated input power 90~305VAC/120~430VDC (HV model) Enhanced G.8032 ring covers multicast packets; MSTP 8/16* MSTI /RSTP ; support MRP ring**Miss-wiring avoidance & node failure protection Miss-wiring avoidance & node failure protection User friendly UI, including auto topology drawing and DDM threshold monitoring with dB values***; Complete CLI Support LACP link aggregation, IGMP v3/router port, DHCP server & DHCP Option82; Port based DHCP distribution, Mac based DHCP server, QoS by VLAN, SSH/SSL, HTTPS, INGRESS/EGRESS ACL L2/L3,TACACS+, QinQ*, SMS** Protocol based VLAN ; IPv4/IPv6 Subnet based VLAN Built-in Environmental Monitoring for temp, voltage & current Wide range operation temperature (-E model):-40~75C/-40~167F; Fan-less design OVERVIEW Lantech IGS-5488MGSFP is a high performance L2+ (All Gigabit) Ethernet switch with 8 10/100/1000T + 8 100M/1G SFP + 4 1G/2.5G SFP auto-sensing cage which provides L2 wire speed and advanced security function for network aggregation deployment. It delivers ITU G.8032 enhanced ring recovery less than 20ms in single ring while also support basic mode and enhanced mode, multiple VLAN model with easy configuration. The comprehensive QoS, QoS by VLAN, advanced security including INGRESS/EGRESS ACL L2/L3, TACACS+, SSH/SSL, Mac based DHCP server, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port, QinQ** are supported and also required in large network. The Cisco Discovery Protocol (CDP) and LLDP are supported for Ciscoworks to detect the switch info and show on L2 map topology. The enhanced platform allows quick booting up time under 50 seconds. Miss-wiring avoidance, Loop protection, Node failure protection The IGS-5488MGSFP also embedded several features for stronger and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Lantech IGS-5488MGSFP is able to alert with the LED indicator and disable ring automatically. Node failure protection ensures the switches in a ring to survive after power breakout is back. The status can be shown in NMS when each switch is back. This feature prevents the broken ring and keep ring alive without any re-configuration needed. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection DHCP option 82 & Port based, Mac based DHCP, Option66, IPv6 DHCP server** DHCP server can assign dedicated IP address by MAC or by port (Port based for single switch), it also can assign IP address by port for multiple switches with single DHCP option82 server. For the ending device which need to download file from TFTP server, DHCP Option66 server can offer IP address of TFTP server to DHCP client. Optional IPv6 address resolution for DHCP service can be supported. User friendly GUI, Auto topology drawing The user friendly UI, innovative auto topology drawing and topology demo makes IGS-5488MGSFP much easier to get hands-on. The complete CLI enables professional engineer to configure setting by command line. Enhanced G.8032 ring, 8/16** MSTI MSTP; MRP ring Lantech IGS-5488MGSFP features enhanced G.8032 ring which can be self-healed in less than 20ms for single ring topology protection covering multicast packets. It also supports various ring topologies that covers enhanced ring and basic ring Datasheet Version 4.3

Lantech" Pioneering Industrial and IP Networks Industrial Gigabit Managed Ethernet Switches by easy setup than others. It supports MSTP that allows RSTP over VLAN for redundant links with 8/16** MSTI. MRP (Media Redundancy Protocol) can be supported for industrial automation networks. QoS by VLAN** for legacy device QoS by VLAN** can allow switch to tag QoS by VLAN** regardless the devices acknowledge QoS or not in which greatly enhance the bandwidth management in a network. QinQ ,and GVRP supported It supports the QinQ and GVRP for large VLAN segmentation. IGMPv3, GMRP, router port, static...

Lantech" Pioneering Industrial and IP Networks Industrial Gigabit Managed Ethernet Switches Bandwidth Control ■ Ingress packet filter and egress rate limit ■ Broadcast/multicast packet filter control Relay alarm output system events Miss-wiring avoidance ■ LED indicator Node failure protection ■ Ensure the switches in a ring to survive after power breakout is back ■ The status can be shown in NMS when each switch is back TFTP/SFTP**/HTTP firmware upgrade System Event Log, SMTP Email alert, SMS** mobile (text) and SNMP Trap for alarm support; 32 RMON counters Security ■...

SPECIFICATION Hardware Specification Mac Address Jumbo frame IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-TX IEEE802.3ab 1000Base-T IEEE802.3z Gigabit fiber IEEE802.3x Flow Control and Back Pressure IEEE802.3ad Port trunk with LACP IEEE802.1d Spanning Tree IEEE802.1w Rapid Spanning Tree IEEE802.1s Multiple Spanning Tree IEEE802.3ad Link Aggregation Control Protocol (LACP) IEEE802.1AB Link Layer Discovery Protocol (LLDP) IEEE802.1X User Authentication (Radius) IEEE802.1 p Class of Service IEEE802.1Q VLAN Tag; Q-Bridge MIB** Back-plane (Switching Fabric): 52Gbps 16K MAC address table 10KB...

Lantech" Pioneering Industrial and IP Networks Industrial Gigabit Managed Ethernet Switches RFC 2674 Q-Bridge MIB*; Bridge MIB, LLDP MIB RSTP MIB* Private MIB *Future release **Optional ***Optional DDM SFP required 8 10/100/1000T + 8 100M/1G SFP + 4 1G/2.5G SFP Auto sensing cage L2+ Industrial Managed Ethernet Switch; -20°C to 60°C; single high power 90~305VAC/120~430VDC

Lantech" Pioneering Industrial and IP Networks OPTIONAL ACCESSORIES DIN Rail Power ■ NDR-240-48 240W (48V 5A) Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C) ■ NDR-120-48 120W (48V 2.5A) Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C; For 115VAC, please refer to...