Managed Ethernet input model Industrial Managed Ethernet Switches IGS-5416MGSFP 16 10/100/1000T + 4 1G/2.5G SFP L2+ Industrial Switch w/ Enhanced G.8032 Ring; PXE ;24V/HV ■ Enhanced G.8032 ring covers multicast packets; MSTP 8 MSTI /RSTP; support MRP ring ■ Miss-wiring avoidance & node failure protection ■ User friendly UI, including auto topology drawing and DDM threshold monitoring with dB values***; Complete CLI ■ Support LACP link aggregation, IGMP v3/router port, DHCP server & DHCP Option82; Port based DHCP distribution, Mac based DHCP server, MLD snooping, QoS by VLAN, SSH v2/SSL, HTTPS, INGRESS ACL L2/L3, TACACS+, QinQ ■ Enhanced Environmental Monitoring for temp., voltage and, current ■ Optional L3Lite/L3* to be upgradable ■ Support PXE to verify switch firmware with the latest or certain version on server ■ Dual Input voltage 12~57VDC (24Vmodel); Single input power 90~305VAC/120~430VDC (HVmodel) ■ USB port to backup, restore the configuration file and upgrade* ■ Wide range operation temperature (-E model): -40~75C/-40~167F OVERVIEW Lantech IGS-5416MGSFP is a high performance L2+ (All Gigabit) switch with 16 10/100/1000T + 4 1G/2.5G SFP which provides L2 wire speed and advanced security function for network aggregation deployment. It delivers ITU G.8032 enhanced ring recovery less than 20ms in single ring. It also supports train ring*, enhanced mode with easy configuration, comprehensive QoS, QoS by VLAN, advanced security including INGRESS ACL L2/L3, TACACS+, SSH v2/SSL, Mac based DHCP server, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port, QinQ which are important features required in large network. The Cisco Discovery Protocol (CDP) and LLDP are supported for Ciscoworks to detect the switch info and show on L2 map topology. The enhanced platform allows quick booting up time under 50 seconds. Miss-wiring avoidance, Loop protection, Node failure protection The IGS-5416MGSFP also embedded several features for stronger and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Lantech IGS-5416MGSFP being able to alert with the LED indicator and disable ring automatically. Node failure protection ensures the switches in a ring to survive after power breakout is back. The status can be shown in NMS when each switch is back. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection. DHCP option 82 & Port based, Mac based DHCP, Option66, IPv6 DHCP server DHCP server can assign dedicated IP address by MAC or by port (Port based for single switch), it also can assign IP address by port for multiple switches with single DHCP option82 server. For the ending device which need to download file from TFTP server, DHCP Option66 server can offer IP address of TFTP server to DHCP client. Basic IPv6 DHCP service can be supported. User friendly GUI, Auto topology drawing The user-friendly UI, innovative auto topology drawing and topology demo makes IGS-5416MGSFP much easier to get hands-on. The complete CLI enables professional engineer to configure setting by command line. Enhanced G.8032 ring, 8 MSTI MSTP; MRP ring Lantech IGS-5416MGSFP features enhanced G.8032 ring which can be self-healed in less than 20ms for single ring topology protection covering multicast packets. It also supports various ring topologies that covers enhanced ring and basic ring by easy setup than others. It supports MSTP that allows RSTP over VLAN for redundant links with 8 MSTI. MRP (Media Redundancy Protocol) can be supported for industrial automation networks. QoS by VLAN for legacy device QoS by VLAN can allow switch to tag QoS by VLAN regardless the devices acknowledge QoS or not in which greatly enhance

Industrial Managed Ethernet Switches the bandwidth management in a network. QinQ, QoS and GVRP supported It supports the QinQ, QoS and GVRP for large VLAN segmentation. Enhanced Storm control* Storm control prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on one of the physical interfaces and the detection is more precise and reaction is more efficient. Optional L3Lite/L3* to be upgradable Lantech OS3 is optional upgradable to L3 Lite for future expansion. The optional L3Lite includes editable routing table, VRRP, Router-on-a-stick, Inter- VLAN routing....

Industrial Managed Ethernet Switches ■ Ingress packet filter and egress rate limit ■ Broadcast/multicast packet filter control Relay alarm output system events Miss-wiring avoidance ■ LED indicator Node failure protection ■ Ensure the switches in a ring to survive after power breakout is back ■ The status can be shown in NMS when each switch is back TFTP/HTTP firmware upgrade System Event Log, SMTP Email alert and SNMP Trap for alarm support; 32 RMON counters Security ■ SSL/SSH v2/INGRESS A CL L2/L3 ■ MA C address table: MA C address entries/Filter/static MAC-Port binding ■ Remote Admin: IP address...

SPECIFICATION Hardware Specification Switch Architecture Transfer Rate IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-TX IEEE802.3ab 1000Base-T IEEE802.3z Gigabit fiber IEEE802.3x Flow Control and Back Pressure IEEE802.3ad Port trunk with LACP IEEE802.1d Spanning Tree IEEE802.1w Rapid Spanning Tree IEEE802.1s Multiple Spanning Tree IEEE802.3ad Link Aggregation Control Protocol (LACP) IEEE802.1AB Link Layer Discovery Protocol (LLDP) IEEE802.1X User Authentication (Radius) IEEE802.1p Class of Service IEEE802.1Q VLAN Tag Back-plane (Switching Fabric): 40Gbps 14,880pps for Ethernet port 148,800pps...

Industrial Managed Ethernet Switches Lantech" Pioneering Industrial and IP Networks *Future release **Optional ***Optional DDM SFP required

Industrial Managed Ethernet Switches Lantech" Pioneering Industrial and IP Networks 16 10/100/1000T + 4 1G/2.5G SFP L2+ Industrial Managed Ethernet Switch; -40°C to 75°C; Enhanced Environmental Monitoring; single high power 90~305VAC / 120~430VDC DIN Rail Power ■ MDR-40 Series 40W Single Output Industrial Din Rail Power; 85-264VAC / 120-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 4% per degree from 60°C ~ 70°C) ■ MDR-20 Series 20W Single Output Industrial Din Rail Power; 85-264VAC / 120-370VDC Input Range; Cooling by...