IGS-3408DSFP
5Pages

Industrial Managed Switches 8 10/100/1000T + 4 Dual Speed SFP L2+ Industrial Managed Switch w/ enhanced G.8032 Ring & PTP ■ Enhanced G. 8032 ring protection < 20ms with easy configuration; Dynamic coupling ring; Aggregation ring* ■ Supports PTP IEEE1588 v2 (under 1p s) ■ Miss-wiring avoidance & Repowered auto ring restore (node failure protection) ■ User friendly UI, including auto topology drawing and DDM threshold monitoring with dB values***; Complete CLI ■ Support LACP link aggregation, IGMP v3/router port, DHCP server & DHCP Option82 for Port&VLAN based DHCP distribution, Mac based DHCP server, QoS by VLAN, SSH/SSL, TACAS+*, HTTPS, ACL, IPv6, SMS ■ Environmental Monitoring for temp., voltage & current** Lantech IGS-3408DSFP is a high performance L2+ (Gigabit uplink) switch with 8 10/100/1000T + 4 100M 1000M Dual Speed SFP which provides L2 wire speed and advanced security function for network aggregation deployment. It delivers ITU G.8032 enhanced ring recovery less than 20ms including dynamic coupling ring, enhanced mode for easy configuration and aggregation ring*, comprehensive QoS, QoS by VLAN, advanced security including ACL L2/L3, SSH/SSL, Mac based DHCP server, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port, QinQ* (double tag VLAN) which are important features required in train and large network. It also supports Cisco Discovery Protocol (CDP) and LLDP for Ciscoworks to detect the switch info and show on L2 map topology. Lantech IGS-3408DSFP features hardware-based PTP IEEE1588 v2 function which can allow 8 10/100/1000T uplinks to synchronize the network with precise accuracy (under 1ps). It has RTC (Real Time Clock) inside that can keep track of current time. The IGS-3408DSFP also embedded several features for stronger and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Lantech IGS-3408DSFP is able to alert with the LED indicator and send out an email, traps or a SMS text. Repowered auto ring restore function (node failure protection) ensures the switches in a ring to survive after power breakout is back. The status can be shown in NMS when each switch is back. This feature prevents the broken ring and keep ring alive without any re-configuration needed. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection. DHCP option 82 and relay agent function (port&vlan based DHCP distribution) can offer the same IP address on port base or vlan base where there is need to replace the new device connecting to Lantech switches to avoid any network disruption. The built-in DHCP Option 82 server offers the convenience of police setting on the switch. Mac based DHCP server function assigns an IP address according to its MAC address to include dumb switches in DHCP network. The user friendly UI, innovative auto topology drawing and topology demo makes IGS-3408DSFP much easier to get hands-on. The switch also equips the RTC (real time clock) which can keep track of time always. The IGS-3408DSFP supports DMI interface that can correspond with DDM SFPs (Digital diagnostic monitor) to display the five parameters in Lantech’s UI, including optical output power, input power, temperature, laser bias current and transceiver supply voltage***. The TX power/RX power raw data is automatically converted to dB values for installer, making it easier to calculate the fiber distance. The complete CLI enables professional engineer to configure setting by command line. Lantech IGS-3408DSFP features enhanced G.8032 ring which can be self-healed in less than 20ms for ring/chain topologies which covers dynamic coupling ring & aggregation ring* protection. The innovative auto-Ring configurator (auto mode) can calculate owner and neighbor in one step. The enhanced mode and dynamic coupling mode ring configuration have never been easier. It supports MSTP that allows RSTP over Vlan for redundant links. The ITU G.8032 Ring and RSTP can

Industrial Managed Switches lantEch" Pioneering Industrial and IP Networks be co-existed in the same switch with different ports for the most flexible protection. The configuration file of Lantech IGS-3408DSFP can be exported in text file so that it can be edited and configured back to switch with ease for mass deployment. The factory reset button can restore the setting back to factory default and built-in watchdog design can automatically reboot the switch when CPU is found dead. QoS by VLAN can allow switch to tag QoS by VLAN regardless the devices acknowledge QoS or not in which greatly...

Industrial Managed Switches ports for IP surveillance application  Multicast static route for non- IGMP camera to Watchdog design to auto reboot switch CPU is prevent flooding; IGMP router port to assign query in ring and for reversed multicast video flow Optional environmental monitoring for system input Multicast VLAN registration* for metro video IGMPv1,v2,v3 with Query mode for multimedia; Supports DIDO (Digital Input/Digital Output) IP30 metal housing with DIN rail and Wall-mount** voltage, current, ambient temperature Factory reset button to restore setting to factory DIMENSIONS...

Industrial Managed Switches DI/DO Operating Humidity Operating Temperature Storage Temperature Power Supply Power Consumption Case Dimension Weight Installation EMI & EMS Stability Testing MTBF Warranty 2 Digital Input (DI) : Level 0: -30~2V / Level 1: 10~30V Max. input current:8mA 2 Digital Output(DO): Open collector to 40 VDC, 200mA 5% ~ 95% (Non-condensing) -20°C~60°C / -4°F~140°F (Standard model) -40°C~75°C / -40°F~167°F(-E model) -40°C~85°C / -40°F~185°F 24/48VDC 10W Metal case. IP-30, 96 (W) x 105 (D) x 152 (H) mm 900 g DIN Rail and Wall Mount** Design FCC Class A, CE EN61000-6-2, CE...

Industrial Managed Switches lantEch" Pioneering Industrial and IP Networks *Future release **Optional ***Optional DDM SFP required 8 10/100/1000T + 4 Dual Speed SFP L2+ PTP Managed Industrial Switch; -20°C to 60°C 8 10/100/1000T + 4 Dual Speed SFP L2+ PTP Managed Industrial Switch; -40°C to 75°C 8 10/100/1000T + 4 Dual Speed SFP L2+ PTP Managed Industrial Switch w/ environmental monitoring; -40°C to 75°C DIN Rail Power ■ AD1048-24FS 24VDC, 2A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C (ambient, derating each output at 2.5% per degree from...