I(P)GS-6300-2P
8Pages

Industrial (PoE) 10G uplink Central Managed Ethernet Switches I(P)GS-6300-2P 4- Modular-Slots w/4 x10G uplink L2+ Industrial Managed Ethernet Switch w/ Enhanced G.8032 Ring; DC/LDC/HV/AC input models  High-density 24/26xGiga + 4x10G uplink L2 + managed (PoE) Ethernet switch, total 28 ports Auto-sensing triple speed1G/2.5G/10G SFP+ Uplink Cage Support IEEE802.3at/af up to 30W per port (PoE model) Support dual power redundancy AC&DC PoE management incl. Detection and Scheduling (PoE model) Support PXE to verify switch firmware with the latest or certain version on server Optional L3Lite/L3* to be upgradable Enhanced G.8032 ring protection < 20ms for single ring. Supports enhanced mode and basic mode; Enhanced G.8032 ring covers multicast packets; MSTP 8 MSTI /RSTP ; support MRP ring Miss-wiring avoidance & node failure protection User friendly UI, including auto topology drawing and DDM threshold monitoring with dB values***; Complete CLI Support LACP link aggregation, IGMP v3/router port, MLD snooping, DHCP server & DHCP Option82; Port based DHCP distribution, Mac based DHCP server, SSH v2/SSL, HTTPS, INGRESS ACL L2/L3,TACACS+, QinQ Protocol based VLAN ; IPv4 Subnet based VLAN Enhanced Environmental Monitoring for temp., actual input voltage, current or total power load Support USB slot for upload/download the firmware Various dual input model selections : DC/LDC/HV/AC Fan-less industrial design; -40~75C operation temperate (-E model) OVERVIEW Lantech I(P)GS-6300-2P is a high performance L2+ (All Gigabit) modular Ethernet switch with max 24/26port Gigabit + 4 10G uplink (total 28ports) w/(24 PoE 802.3af/at ports) which provides L2+ wire speed and advanced security function for network aggregation deployment. It delivers ITU G.8032 enhanced ring recovery less than 20ms in single ring. It also supports enhanced mode with easy configuration, comprehensive QoS, advanced security including INGRESS ACL L2/L3, TACACS+, SSH v2/SSL, Mac based DHCP server, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port which are important features required in large network. The Cisco Discovery Protocol (CDP) and LLDP are supported for Ciscoworks to detect the switch info and show on L2 map topology. Up to 24 PoE at/af ports w/advanced PoE management Compliant with 802.3af/at standard, the Lantech I(P)GS-63002P is able to feed each PoE port up to 30 Watt. Lantech I(P)GS-6300-2P supports advanced PoE management including PoE detection and scheduling. PoE detection can detect if the connected PD hangs then restart the PD; PoE scheduling is to allow pre-set power feeding schedule upon routine time table. Each PoE port can be enabled/disabled, get the voltage, current, Watt, and temperature info displayed on WebUI. Miss-wiring avoidance, Node failure protection, Loop protection The I(P)GS-6300-2P also embedded several features for stronger and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Lantech I(P)GS-6300-2P is able to alert with the LED indicator and disable ring automatically. Node failure protection ensures the switches in a ring to survive after power breakout is back. The status can be shown in NMS when each switch is back. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection. Enhanced Storm control* Storm control prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on one of the physical interfaces and the detection is more precise and reaction is more efficient. Optional L3Lite/L3* to be upgradable Datasheet Version 1.6

Lantech" Pioneering Industrial and IP Networks Lantech OS3 is optional upgradable to L3 Lite for future expansion. The optional L3Lite includes editable routing table, VRRP, Router-on-a-stick, Inter- VLAN routing. Support PXE to verify switch firmware with the latest or certain version The switch can check its firmware version during booting time via PXE protocol. If switch finds any newer version, it will upload automatically. QoS by VLAN for legacy device QoS by VLAN can allow switch to tag QoS by VLAN regardless the devices acknowledge QoS or not in which greatly enhance the bandwidth...

Industrial (PoE) 10G uplink Central Managed Ethernet Switches Lantech" Pioneering Industrial and IP Networks Supports IEEE 802.1ab LLDP, Cisco CDP; LLDP info can be viewed via Web/ Console Support PXE to verify switch firmware with the latest or certain version DHCP server / client / DHCP Option 82 relay / DHCP Option 82 server; Port based DHCP server; DHCP Option 66 Mac based DHCP server to assign IP address that includes dumb switches in DHCP network Bandwidth Control ■ Ingress packet filter and egress rate limit ■ Broadcast/multicast packet filter control Relay alarm output system events...

Industrial (PoE) 10G uplink Central Managed Ethernet Switches Lantech" protection Configuration backup and restoration ■ Supports text configuration file for system quick installation ■ USB slot to upload/download firmware by USB dongle ■ TFTP/HTTP firmware upgrade ■ IP30 metal housing with rack-mount design SPECIFICATION Hardware Specification Switch Architecture IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z Gigabit Fiber IEEE 802.3ae 10G Ethernet over Fiber IEEE 802.3an 10G Copper IEEE 802.3x Flow Control Capability ANSI/IEEE...

Lantech" Pioneering Industrial and IP Networks Optical Cable 1Gbps: Multi mode: 0 to 550 m, 850 nm (50/125 pm); 0 to 2 km, 1310 nm (50/125 pm) Single mode: 0 to 10 km/ 30 km/ 40 km, 1310 nm (9/125 pm); 0 to 50 km/ 60 km/ 80km/ 120 km, 1550 nm (9/125 pm) 2.5Gbps Multi mode: 0 to 300 m, 850 nm (50/125 pm); Single mode: 0 to 2 km/ 15 km/ 40 km, 1310 nm (9/125 pm); 0 to 40 km/ 80 km/ 100km, 1550 nm (9/125 pm) WDM 1Gbps: Single mode: 0 to 10 km/ 20 km/ 40 km/ 60 km, 1310 nm (9/125 pm); 0 to 80 km, 1490 nm (9/125 pm); 0 to 10 km/ 20 km/ 40 km/ 60 km/ 80 km, 1550 nm (9/125 pm) WDM 2.5Gbps Single...