GRE2001 SFe GAS RECYCLING AND CHARGING DEVIC> Technical parameter Mode ** Drift diameter of pipe is DN20 and pipe length is 5m. ***lt means water content in gas after initial filtering and drying when water content in source gas is 10OOPPM/V. > Performance parameters of main parts > Description SF6 gas recycling and charging device is used to evacuate, recycle, purify, charge and store SF6 gas in high pressure switch equipment. It is widely applied in high pressure switch producer, power supply sector, colleges and science/research sector. > Features 1. It boasts advanced design, complete functions, reasonable structure and easy and clear operation. 2. It takes semi-enclosed compressor as core host and adopts international advanced technology. All of its core parts are imported from Europe to ensure its stable performance and long service life. 3. Vacuum pump is Leybold D60C from Germany, which features rapid pumping and low ultimate vacuum with pumping speed of 60m3/h. 4. All ball valves are American swagelok original products, which provide reliable performance. 5. It is equipped with automatically reproducible filter and has less than 60PPM of moisture after initial filtering. 6. The equipment is of air-cooled mobile mode and can be used where there is no external water source. 7. Its electric system is equipped with phase sequence protection device and phase sequence of three-phase power can be directly adjusted. Electric system also provides default phase protection function to effectively avoid reverse movement of vacuum pump and default phase movement of all hosts. 8. It has less weight (<900kg) and low noise (<75dB (A)). Vacuum gage is Leybold Display One vacuum gage from Germany All internal ball valves are Swagelok original ball valves. A kit of gas charging/discharging adaptor is put inside equipment. Alarm lamp and buzzer on equipment panel give alarm after equipment works for 1000 hours to remind operators. Lanso Konly (Shanghai) Instruments Co., Ltd. Expert In SF6 Gas Monitoring Solutions