> Description This product is a device to connect SF6 density monitor with SF6 gas chamber. After the completion of the assembly, the electrical maintenance personnel can make SF6 gas density monitor calibration or replacement without disassembling the unit, solving the disassembling difficulty in monitor check, replacement and gas supplementation, avoiding the damage to switch sealing surface and sealing joints caused by disassembling joints in periodic verification process, greatly reducing the chance of leakage, improving work efficiency and ensuring the safe operation of SF6 electrical switches. > Application SF6 Gas Insulated Switchgear (GIS) SF6 insulated circuit breakers SF6 insulated pole-mounted switch SF6 insulated transformer SF6 insulated mutual inductor SF6 Gas insulated busbar systems SF6 insulated inflatable cabinet SF6 insulated RMU > Features 1. Without disassembling SF6 density monitor, SF6 gas density monitor can be calibrated or replaced 2. Without disassembling the screws, a person can operate independently, which is convenient, saving effort and time 3. It can facilitate on-site personnel to measure micro-water and supplement air for switch 4. Avoid the sealing surface and sealing joint damage caused by the disassembling > Options 1. Interface size: customizable 2. Nominal diameter: customizable > Technical Data 1 . Valve body material: 3 . Surface treatment: aluminum alloy, copper, stainless steel Aluminum: Anodized treatment 2 . Nominal diameter : Copper alloys: Not processed 6.8.12 mm (Medium voltage equipment) AISI304 Stainless steel: Not processed 20mm (High-voltage equipment) 4 . Leakage rate: <1 x 10"8 Pa-m3/s (Helium leakage inspection) Lanso Konly (Shanghai) Instruments Co., Ltd. Expert In SF6 Gas Monitoring Solutions