PDT 80M Precision Drop Tester The transport and distribution environment holds numerous opportunities for packages to experience impacts and/or drops. As a result, shock is transmitted both into, and throughout, a given package. The products within the packaging respond to both the amplitude and frequency characteristics of the shock. How the various packaging components mitigate that shock determines how much shock is transmitted into the product held within. Lansmont Drop Test Systems are used to perform pre-shipment testing in an effort to design and verify costeffective, optimized protective packaging solutions. PERFORMANCE SPECIFICATIONS FLATNESS ACCURACY Before each drop tester is shipped, its accuracy is verified to within +/- 2 degrees. Maximum Package Weight: Standard platen 177 lbs. (80.0 kg) Extended platen option 150 lbs. (68.0 kg) Maximum Package Size: Standard platen 24.0 in. (61.0 cm) front to back Extended platen option 36.0 in. (91.5 cm) front to back Drop Height Range: Flat Drop *Extended drop height available. Test Equipment | Instruments | Support Services 17 Mandeville Court, Monterey, California 93940 | 831.655.6600 | lansmont.com

FEATURES Field-to-Lab Foot Switch: The drop mechanism of the PDT 80M Drop Tester is operated via a footswitch. When the footswitch is pressed, the drop leaf is activated and performs a drop test. After the footswitch is released, the drop leaf will reset. The footswitch is protected inside a metal guard enclosure to avoid accidental activation. Precision Cam Design: Lansmont's precision cam and bearings design is a key machine feature for producing a flat drop event. When the drop tester is armed and fired, the drop leaf first moves straight down faster than the package and then swings out of...

PDT 80M Precision Drop Tester APPLICATIONS Hazard Drops In reality, not all items are dropped on flat, laboratory-style floors. In fact, some small parcel distribution tests require drops to occur on a predetermined hazard. Edge Drop Corner Drop Controlled Orientation Test procedures and industry standards specify the requirement for controlled orientation drops, resulting in test sample impacts on predetermined faces, corners and edges. Lansmont Precision Drop Testers are built in accordance with ASTM D5276 requirements. Bare Product Drop Extended Height SIZE Small Not quite the equipment size...

PDT 80M Precision Drop Tester Lansmont^ Field-to-Lab r SPECIFICATIONS UTILITIES Power -Standard voltages: 110 VAC - 1 phase - 60 Hz. (10 amps) 220 VAC - 1 phase - 50 Hz. (5 amps) Optional voltages: 100 VAC - 1 phase - 50 Hz. (10 amps) 100 VAC - 1 phase - 60 Hz. (10 amps) Plant Air -Pressure: 40 - 60 psi (2.8 - 4.1 bar) Flow Rate: 0.5 scfm 200 VAC - 1 phase - 50 Hz. (5 amps) 220 VAC - 1 phase - 60 Hz. (5 amps) 200 VAC - 1 phase - 60 Hz. (5 amps) SIDE VIEW FRONT VIEW MACHINE DIMENSIONS (standard machine) Height: 104 in. (264 cm) CRATE INFORMATION (standard machine) Height: 29 in. (74 cm) Shipping...