*mydirectindustry

Catalogs
Lansmont
Model 7000 Vertical vibration test system

Model 7000 Vertical vibration test system

Product catalog summary

Overview: The Model 7000 Vibration Test System is designed for testing heavier payloads, offering similar performance to the Model 1800. It is suitable for resonance search, fixed-frequency dwell tests, and distribution simulation according to ASTM, ISTA, ISO, and other industry standards. The system can also execute test profiles from SAVER™ environmental data.

Performance Specifications:

Frequency Range: 1 – 300 Hz
Maximum Stroke Options: 2.5 in. (6.4 cm), 4.0 in. (10.2 cm), 6.0 in. (15.2 cm)
Actuator Stall Force: 9171 lbs. (41 kN) at 3000 psi (207 bar)
Actuator Dynamic Force: 6114 lbs. (27.2 kN) at 3000 psi (207 bar)

Physical Specifications:

Table Sizes: 48 in. (122 cm), 60 in. (152 cm), 72 in. (183 cm) square
Standard Hole Patterns: 6 in. grid with 3/8-16 Stainless Steel inserts, 15 cm grid with M10 x 1.5 Stainless Steel inserts

Power Requirements:

System Controls Voltage: 200 – 460 VAC (Three Phase), 100 – 240 VAC (Single Phase)
Frequency: 50, 60 Hz

Facility Requirements:

Cooling Water: Standard HPS – 6 gpm at 60°F (23 L/min. at 15.5°C)
Plant Air: 80 psi (552 kPa), 1 scfm
1-G Supports (optional): 58 in. (147.3 cm) - 76.7 in. (194.8 cm), 42.3 in. (107.3 cm) - 62.3 in. (158.3 cm)

Catalog excerpts

Model 7000 Vertical vibration test system-1

7000 Vibration Tester The Model 7000 Vibration Test System has similar performance to the Model 1800 with the advantage of being able to accommodate heavier payloads. The system runs resonance search and fixed-frequency dwell tests for product evaluation and is also used for distribution simulation per ASTM, ISTA, ISO and other common industry test specifications. The system will also run test profiles created from SAVER™ environmental data. For testing heavier test items or unitized loads, the Model 7000 might be the best choice for to satisfy your performance and payload requirements. Each vibration system features a table sized to the application, a rugged hydraulic actuator, a reliable hydraulic power supply, and Lansmont’s TouchTest Vibration Control System. PERFORMANCE SPECIFICATIONS Frequency Range Maximum Stroke Options (peak-to-peak) Actuator Stall force (at 3000 psi (207 bar)) Actuator Dynamic Force (at 3000 psi (207 bar)) Test Equipment | Instruments | Support Services 17 Mandeville Court, Monterey, California 93940 | 831.655.6600 | lansmont.com

Open the catalog to page 1

Model 7000 Vertical vibration test system-2

7000 Vibration Tester SPECIFICATIONS SYSTEM DRAWING SIDE VIEW Table Sizes Standard Hole Patterns 6 in. grid, 3/8-16 Stainless Steel inserts 15 cm grid, M10 x 1.5 Stainless Steel inserts 42.3 in. (107.3 cm) - 62.3 in. (158.3 cm) POWER REQUIREMENTS System Three Phase Single Phase FACILITY REQUIREMENTS Cooling Water

Open the catalog to page 2

All Lansmont catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list