- Catalogs
- Lanner Anlagenbau
- PV25 - PV60
PV25 - PV60
PV25 - PV60
The parabolic centrifuge operates by feeding wet, free-flowing chips into an infeed hopper, where they fall into a drum. Centrifugal force pushes the chips against the drum wall, moving them upwards onto a slot sieve. This process separates the coolant from the chips. The dried chips are then discharged into a chip cart or conveyor, while the centrifuged liquid can be recycled back into the machine-tool or a coolant-cleaning system.
- PV25: Throughput of 250 kg/h for steel/stainless steel, 80 kg/h for aluminium, and 375 kg/h for grey cast iron. Dimensions: A=960 mm, B=530 mm, ØC=590 mm, ØD=450 mm, ØE=250 mm. Capacity: 0.75 kW. Weight: 120 kg.
- PV40: Throughput of 700 kg/h for steel/stainless steel, 230 kg/h for aluminium, and 1,000 kg/h for grey cast iron. Dimensions: A=1,440 mm, B=910 mm, ØC=950 mm, ØD=450 mm, ØE=350 mm. Capacity: 2.20 kW. Weight: 400 kg.
- PV50: Throughput of 1,500 kg/h for steel/stainless steel, 500 kg/h for aluminium, and 2,000 kg/h for grey cast iron. Dimensions: A=1,740 mm, B=1,120 mm, ØC=1,170 mm, ØD=550 mm, ØE=440 mm. Capacity: 3.50 kW. Weight: 650 kg.
- PV60: Throughput of 2,500 kg/h for steel/stainless steel, 850 kg/h for aluminium, and 3,500 kg/h for grey cast iron. Dimensions: A=2,050 mm, B=1,350 mm, ØC=1,350 mm, ØD=600 mm, ØE=500 mm. Capacity: 3.50 kW. Weight: 850 kg.
The parabolic centrifuge offers several benefits, including a long service life, highly wear-resistant construction, vibration-proof setup, optimal dryness of chips, fully automatic and continuous operation, compact design, low maintenance costs, ease of maintenance, and it serves as an economical alternative to the lifting bottom centrifuge.
Lanner Anlagenbau GmbH, Kehnerfeld 9, D-77971 Kippenheim, Tel. +49 (0) 7825-8454 0, Email: [email protected], Website: www.lanner.de
Catalog excerpts
Parabolic centrifuge PV25 - PV60 Advantages - long service life - highly wear-resistant execution - vibration-proof set-up - best possible degree of dryness - fully automatic and continuous operation - compact design - very low maintenance costs - very easy to maintain - economic alternative to the lifting bottom centrifuge Functional principle The wet, free-flowing chips are fed into the infeed hopper of the centrifuge and fall into the drum. The centrifugal force presses the chips against the drum wall and they move upwards onto the slot sieve. At this point the coolant is separated from the chips. The dried chips are carried over the edge of the drum and quit the centrifuge downwards into a chip cart or discharge conveyor. The centrifuged liquid can be returned for further treatment into the machine-tool or can be pumped back into a coolant-cleaning system Steel/Stainless steel Grey cast iron * Throughput depending on kind of material and used coolant Lanner Anlagenbau GmbH · Kehnerfeld 9 · D-77971 Kippenheim · Tel. +49 (0) 7825-8454 0 · [email protected] · www.lann
Open the catalog to page 1All Lanner Anlagenbau catalogs and technical brochures
DS32 - DS1501 Page
Chip crusher1 Page
Vetamat ® Eco1 Page
ME loading centrifuge1 Page
Vetamat®1 Page
Vacoline® / Fluidline1 Page
Chip Crusher1 Page
Briquetting press1 Page
Lanner - Corporate brochure8 Pages
- Crushing plant
- Screening unit
- Bulk material screening machine
- Stationary crushing plant
- Impact crushing and screening plant
- Laboratory centrifuge
- Vertical centrifuge
- Compact crushing plant
- Floor-standing centrifuge
- Briquetting press
- Automatic centrifuge
- Process centrifuge
- Compact centrifuge
- VSI crushing and screening plant
- Chip briquette press
- Automatic briquetting press
- Process screening unit
- Cleaning centrifuge
- Metal chip briquetting press
- Continuous centrifuge