*mydirectindustry

LZ4-S

Product catalog summary

Overview: The document provides technical specifications and features of the programmable veneer cutting and edge jointing machine, model lZ 4-S, manufactured by Langzauner Gesellschaft m.b.H. It highlights the machine's capabilities, technical data, and operational features.

Specifications:

The machine includes SPS position and machine control, electromotive autofeed, and pneumatic saw blade adjustment.
It features a double linear guide shaft and pneumatically controlled lifting and lowering of the saw and milling units.
The format table is equipped with an electromotive drive, digital readout, and pneumatic lowering parallel fence with depths of 560, 1,000, 1,500, and 2,100 mm.
Additional features include a laser for cut indication and pusher clamps.

Technical Data:

Cutting lengths: 3,050 mm, 3,500 mm, 4,200 mm.
Cutting and milling height: 40 mm.
Saw blade diameter: Ø 200 x 2.8 (1.5) x 16 mm, Z54.
Saw blade speed: 9,000 rpm; Motor power: 2.2 kW.
Cutter dimensions: Ø 85 x 50 x 30 mm, Z4; Speed: 10,500 rpm; Motor power: 1.1 kW.
Auto feed speed: 2 – 25 m/min.
Required space: 4,850 x 1,700 mm to 6,000 x 1,700 mm depending on fence depth.
Exhaust vacuum: 1,400 Pa; Capacity: approx. 1,270 m3/h; Speed of stream: > 20 m/sec.
Exhaust diameter: 150 mm; Dust emission: < 2 mg/m3.
Sound levels: Idle running LWA = 83.3 dB(A), Operating running LWA = 85.8 dB(A).

Operational Features:

The machine is programmable with automatic sequence control based on selected operating modes.
It includes a computer for storing recurring veneer cuts and integrated strip automation.

Contact Information: Langzauner Gesellschaft m.b.H., 4772 Lambrechten 52, Austria. Tel: +43 7765 / 231-0, Fax: +43 7765 / 231-85, Email: [email protected], Website: www.langzauner.at

Catalog excerpts

PRD G RAM M I ERBARE FUGE-, FURNIER- PROGRAMMABLE VENEER CUTTING AND EDGE JDINTING MACHINE LZ 4-S

Open the catalog to page 1

Programmierbare Füge-, Furnierund Plattensäge LZ 4-S Programmierbare Füge-, Furnier- und Plattensäge mit automatischer Ablaufsteuerung nach vorgewählter Betriebsart. PS Positionier- und Maschinensteuerung S nkl. elektromotorischem Vorschub I Inkl. Zahnstangenausgleich im Druckbalken Inkl. pneumatischer Sägeblattverstellung Doppelte Linearführung Pneumatisches Anheben und Absenken des Säge- und Fräsaggregates erfolgt getrennt voneinander Pneumatisch absenkbarer Breiten nschlag a L ängsführung der Aggregate auf gehärteter Computer zum Abspeichern von wiederkehrenden Furnierschnitten, inte rie...

Open the catalog to page 2

Programmable veneer cutting and edge jointing machine Options Programmable veneer cutting and edge jointing machine, completely automatic. L aserrichtlicht zur Schnittlinien nzeige Pusher clamps angetriebenem und absenkbarem Breitenanschlag, digitaler Positionsanzeige und elektronischer Positionierung Anschlagtiefen: 560, 1.000, 1.500 und 2.100 mm Format table with electromotive drive, digital readout and pneumatic lowering parallel fence in different sizes, digital indication of dimension and position control unit Depth of fence: 560, 1,000, 1,500 and 2,100 mm

Open the catalog to page 3

Technical data: Cutting length (approx.) Cutting and milling height Motorleistung Fräser Motor power of cutter Speed of auto feed Required space approx. (depth of fence 560 mm) Exhaust vacuum Exhaust capacity (approx.) Exhaust diameter Dust emission Schallleistungspegel in dB(A) Leerlauf L WA = 83,3 Bearbeitung L WA = 85,8 Sound level in dB(A) Idle running Operating running Schalldruckpegel am Arbeitsplatz in dB(A) Leerlauf L WA = 88,3 Bearbeitung L WA = 85,8 Sound pressure level in dB(A) Idle running Operating running Alle angegebenen Werte sind Cirkawerte. Änderungen und alle Rechte bzw. Satz-...

Open the catalog to page 4

All Langzauner catalogs and technical brochures

Archived catalogs

Folder Cutting
8 Pages
Folder Sanding
12 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list