TRX Series Burners
2Pages

Lanemark TRX series packaged, high efficiency, small diameter immersion tube tank heating systems meet the needs of industrial process tanks which have heat input requirements of up to 45 kW (150,000 Btu/h). Built to the same exacting standards as the larger capacity TX modular tank heating burner systems, the TRX burner incorporates burner, gas train and control system and is packaged to simplify/ minimise plant installation work. Specific advantages compared with alternative tank heating methods -• Low operating costs - operating efficiencies of > 80% gross calorific value > 90% net calorific value • TRX small diameter immersion tube heat exchangers occupy minimal tank space. This enables smaller tanks for new plant designs and allows the simple replacement of other heating systems for retrofit applications.TRX immersion tubes can be configured in almost any multi-pass shape to ensure that they remain well clear of any internal tank fittings or processing areas. • All tank heat input and immersion tube performance calculations are easily carried out using Lanemark’s dedicated computer design software. • Induced draught combustion air system allows multiple burner systems to be connected to a common flue while retaining individual burner control. • Operates with low gas supply pressures. • Firing into rubber lined or fibre glass tanks is permitted due to low initial heat exchanger surface temperatures at tank connection. • Simple heat exchanger installation requires only two pipe flange drillings, usually in one tank wall. • Fully compatible with Lanemark TX burner systems TRX15 so that they may be incorporated into schemes where TRX20 multiple TRX/TX burner arrangements are required. Model Tube Size Maximum Heat Input 1/2" (40mm) 2” (50mm) Typical Applications • Product finishing (metal parts, steel strip, wire products, etc.) - Pre-treatment and treatment processes including: alkali/caustic degreasing phosphating hot water rinsing aluminium etching anodising borax and lime coatings - Dip tanks - Spray systems - Hot water supply systems • Cleaning (industrial washing machines) - Plastic crate washers - Parts washers - Bottle washers • Food and Drink Production - Hot water tanks - Mini brewery wort coppers - Cleaning in place (CIP) tanks - Animal scalders - Blanchers TRX burners conform with European Standard EN 746 Part 2 as appropriate and are pre-wired and tested prior to despatch. Specifications Lanemark packaged TRX immersion tube burner systems exhaust damper and an exhaust fan which can be coupled are assembled within a splash-proof enclosure and to multiple TRX/TX burner installations. incorporate the burner, gas valve train and burner controls, Fuels Control voltages Exhaust fan electrical supplies Flame sensing Heat output control options ✓ Standard equipment • Options ✓ Natural gas • Propane ✓ Flame electrode ✓ On/off or High/low ____ TRX TANK HEATING SYSTEMS

All dimensions in mm, except where stated. lAlNJEMARK ■—1BurnerCare 1 ' All TRX burners benefit from Lanemark’s BurnerCare customer support. BurnerCare services include burner system commissioning/start-up, supply of spare parts and system training. BurnerCare will provide a contract service plan and a rapid response facility, designed to ensure the continued and reliable operation of Lanemark equipment worldwide. Additional Burner Products (See individual Data Sheets for full details) Also available from Lanemark is the TX range of larger capacity modular tank heaters and the FD range of...