Bendi B3/30 AC 3 Wheel Electric Multi-Purpose VNA Articulated Forklift Truck

Product catalog summary

Overview: The B3/30 is a 3-wheel Bendi articulated forklift designed for very narrow aisles (VNA) with a single poly front drive tire and solid rubber rear tires. It is suitable for both indoor and outdoor use on paved surfaces.

Specifications:

Model: B3/30AC
Capacity: 3,000 lbs (1,363 kg)
Load Center: 24 in (600 mm)
Power Source: Electric battery
Weight with Battery: 12,800 lbs (5,818 kg)
Travel Speed: Loaded 5.5 mph (8.9 kph), Unloaded 6 mph (9.7 kph)
Lift Speed: Loaded 90 fpm (27.4 mpm), Unloaded 110 fpm (33.5 mpm)
Lowering Speed: Loaded 100 fpm (30.5 mpm), Unloaded 90 fpm (27.4 mpm)
Mast Tilt: 1° Forward, 2° Backward
Front Articulation: 200°
Battery: 48 volt, 680 AHC

Standard Features:

Three-wheel design with single front-wheel drive
Integral sideshifter with 11.2" (285mm) stroke
Adjustable seat and steering wheel
Hydraulic power steering with front-wheel steer
AC traction and hydraulic motor controllers
Interactive LCD status monitor
Hydraulic rear wheel brakes
Safety seat switch and seat belts
High visibility mast and backrest
ANSI B56.1 compliant
Cold storage conditioned to -22°F (-29°C)

Optional Features:

Non-standard fork lengths
LED headlights and safety light bars
Backup alarm with adjustable tone
Fire extinguisher
Roller/slide-out battery tray
Laser fork height indicator
Keyless keypad on-off

Technical & Dimension Data:

Wheelbase: 69.4 in (1762 mm)
Overall Length to Face of Forks: 110.4 in (2804 mm)
Chassis Width: 43 in (1092 mm)
Gradeability: Unloaded 8%, Loaded 5%
Hydraulic Motor Rating: 12 kW
Drive Motor Rating: 5.1 kW
Wheel Sizes: Front and Rear 18x7 in (457x178 mm)

Mast Sizes:

Lift Heights range from 156 in (3.96 m) to 360 in (9.14 m)
Corresponding lowered heights and free lifts provided

Aisle Dimensions:

Minimum clear aisle for 40" x 48" load: 66" (1,676 mm)
Minimum clear transfer aisle: 118" (3,000 mm)

Catalog excerpts

Bendi B3/30 AC 3 Wheel Electric Multi-Purpose VNA Articulated Forklift Truck-1

The B3/30 is a 3 wheel Bendi, with a single poly front drive tire and solid rubber rear tires. Front articulation of 200°, narrow mast and compact front end allows stacking easily in Very Narrow Aisles. The B3/30 can also work inside and outside on paved surfaces. Model B3/30AC 3 Wheel Bendi Electric multi-purpose VNA Articulate d forklift truck Standard Features • Three Wheel Design, Single Front Wheel Drive • 11.2" (285mm) Stroke Integral Sideshifter • Adjustable Seat and Steering Wheel • Hydraulic Power Steering - Front Wheel Steer • AC Traction Motor Controller with LandActive Control (LandActive control provides additional control during stacking as the maximum truck speed is controlled by steering angle.) • AC Hydraulic Motor Controller • Interactive LCD Status Monitor BDI with Lift Interrupt, Hourmeter with Service Monitor, D iagnostic Code Display, Input Device Calibration • Hydraulic Rear Wheel Brakes • Safety Seat Switch and Seat Belts • 40" (1000mm) Tapered Tip Forks - Rear Tow Pin • Hand Actuated Parking Brake • Creep Speed Mode Selection Switch • High Visibility Mast and 36" (914mm) High Backrest • Mast Tilt 1º Forward and 2º Back • 48 Volt Electrical System • Three Section Hydraulic Control Valve • Smooth Poly Front Drive Tire and Rubber Rear Tires • Horn, Keyswitch and Hourmeter • Meets ANSI B56.1 • Cold Storage Conditioned to -22°F (-29°C) OPTIONAL FEATURES • Non-Standard Fork Lengths • Dual Overhead Guard Mounted LED Headlights • Dual Rear Safety LED Light Bars • Safety Flashing LED Light • Backup Alarm - Beeping Tone ("smart" dB adjusting) • Fire Extinguisher - OHG Post Mounted • Roller/Slide-Out Battery Tray • Laser Fork Height Indicator • Fork Positioner • Keyless Key Pad On-Off LANDOLL CORPORATION MATERIAL HANDLING PRODUCT DIVISION WWW.LANDOLL.COM/MHP

Open the catalog to page 1

Bendi B3/30 AC 3 Wheel Electric Multi-Purpose VNA Articulated Forklift Truck-2

MHEDA YOUR INDUSTRY CONNECTION MATERIAL HANDLING OF AMERICA ® INDUSTRY Member Company a b c d e g f j i h k m B3-30AC/0211 Bendi B3/30AC Electric Multi-Purpose VNA Articulated Forklift Truck TECHNICAL & DIMENSION DATA RECOMMENDED BATTERY AISLE DIMENSIONS MAST DIMENSIONS 1900 NORTH STREET • MARYSVILLE, KS 66508 • (800).428.5655 • www.landoll.com/mhp The specifications contained in this spec sheet are subject to change at any time without notice. Actual dimensions and performance data given herein may vary due to manufacturing tolerances. TECHNICAL DATA MODEL B3/30AC Capacity lbs/kg 3,000 / 1,363...

Open the catalog to page 2