- Catalogs
- Lamy Les Constructeurs
- Multifunction Bucket R series
Multifunction Bucket R series
Multifunction Bucket R series
The grapple bucket R series offers widths ranging from 1.70m to 2.60m. It features a rounded bottom with a stiffening fold across the width and is boxed below. Several grapple models can be mounted on this bucket.
Standard Grapple Models:
- (GR): Detachable flame-cut flat teeth (x7).
- (GR.K): Electroforged finger variant, 35mm length, 680mm (x7).
- (MRK): Jaw with electroforged fingers, 35mm length, 680mm, mounted with anti-scratch rings (x7).
- (MRK.D): Variant with 12 fingers for better removal (x12).
- (GRL.S.1E): 20mm thick welded flat teeth grapple with 1 blank connecting the teeth.
- (GRL.S.2E): 20mm thick welded flat teeth grapple with 2 blanks connecting the teeth.
Included Features:
- Bolted counter plate kit.
- Bolted side plates.
Model BMF.R:
This is a robust and high-capacity model suitable for power ranges from 100 to 150 hp.
Capacity and Weight:
| Model | Width | Closed Grapple Capacity | Weight (Grapple) | Weight (Jaw) |
|---|---|---|---|---|
| BMF.R 20 | 2.00m | 1.30m3 | 600Kg | 550Kg |
| BMF.R 23 | 2.30m | 1.50m3 | 750Kg | 690Kg |
| BMF.R 24.5 | 2.45m | 1.80m3 | 800Kg | 780Kg |
Catalog excerpts
BMF.R BENNE MULTIFONCTION SÉRIE R Grapple bucket R series Modèle robuste et de grande capacité - puissance de 100 à 150 cv Robust and high-capacity model - power from 100 to 150 hp CARACTERISTIQUES : Largeurs disponibles : de 1,70m à 2,60m Available widths: from 1,70 to 2,60m Fond bombé, pli rigidifieur sur la largeur, caissonné en dessous Rounded bottom, stiffening fold on the width, boxed below Plusieurs grappins disponibles qui peuvent être montés sur ce modèle de benne Several available grapples that can be mounted on this bucket model Les modèles de grappins de série sont : The standard grapple models are: (GR) : Dents plates oxycoupées démontables (x7) (GR): Detachable flame-cut flat teeth (x7) (GR.K) : Le même en variante doigts électroforgés, 35mm lg 680mm (x7) (GR. K): The same in electroforged finger variant, 35mm lg 680mm (x7) (MRK) : Mâchoire doigts électroforgés 35mm lg 680mm, montée avec bagues anti–pivotement (x7) (MRK): Jaw electroforged fingers 35mm lg 680mm, mounted with anti-scratch rings (x7) (MRK.D) : La même en variante 12 doigts pour un meilleur désilage (x12) (MRK.D): The same in variant 12 fingers for a better removal (x12) (GRL.S.1E) : Grappin dents plates soudées épaisseur 20mm avec 1 ébauche reliant les dents entre elles. (GRL.S.1E): 20mm thick welded flat teeth grapple with 1 blank connecting the teeth together (GRL.S.2E) : Grappin dents plates soudées épaisseur 20mm avec 2 ébauches reliant les dents entre elles. (GRL.S.2E): 20mm thick welded flat teeth grapple with 2 blanks connecting the teeth together Bolted counter plate kit Joues boulonnées Bolted side plates Contenance Grappin Fermé Closed Grapple Capacity Poids approximatif sans accrochage - photos non contractuelles / Approximate weight without hitch-non-contractual pho
Open the catalog to page 1All Lamy Les Constructeurs catalogs and technical brochures
Muck,fork1 Page
Quick hook apron1 Page
Bale Handler1 Page
Push Bucket1 Page
MTBB Baglifter1 Page
Spur apron1 Page
Straw fork with jaw1 Page
Farmhelper1 Page
Special waste muck fork1 Page
Trapezoidal buchet1 Page
GRAPPLE BUCKET W1 Page
Cereal Rehandling Bucket1 Page
Cereals Bucket1 Page
Skeleton Bucket1 Page
Multifunction Bucket1 Page
Hydro Grab Fork 2 series1 Page
Bale Camp "C3" series1 Page
Side Tip Shovel1 Page
Excavating Bucket1 Page
4 en 1 Bucket "R" series1 Page
JIB / Tilting JIB1 Page
Front Post Bucket1 Page
Jibs Tilting Jib1 Page
Material Handling Basket1 Page
Big Bag Filler GRBB1 Page
Picker1 Page
Reinforced Tipper1 Page
Earthmoving Bucket2 Pages
Curing Bucket1 Page
Recovery Bucket W series1 Page
Log Pliers1 Page
Fork Door Apron1 Page
Straw Fork without jaw1 Page
CATALOGUE 2156 Pages
