Technical data for electrically actuator EX-area 1, II2G Ex d IIC T6 Gb
Technical data for electrically actuator EX-area 1, II2G Ex d IIC T6 Gb
- Self-retaining Moment: 15 Nm and 24 Nm for different variants.
- Bearing: CuZn40 AL2, maintenance-free.
- Ambient Temperature Range: -20 to +60 °C.
- Dimensions: Diameter 204 mm, Height 208 mm.
- Weight: 8 kg for Aluminium-Sandcast Housing, 11.6 kg for Stainless Steel Housing.
- Type: TA 130 LT, with electronic control 4…20 mA.
- EX-approval: II2G Ex de IIC T6.
- Output Shaft: Ø12 x 25 mm.
- Power Transmission: Parallel key DIN 6885-A-4x4x14-1.4571.
- Voltage: 230V/50Hz.
- Running Time [90°]: 60 sec.
- Angle of Rotation Default: 90°.
- Controlling: 4M20 mA.
- Feedback: 4M20 mA, not fail-safe and Potentiometer 0 – 5 k-Ohm, TÜV certified.
- Type of Protection: IP 65.
- End Switches: 2 pieces, without.
- Direction of Rotation: Counterwise (12.00 to 3.00).
- Adaption: Circle of holes Ø 50 mm, 4x M6.
- Color Cover: Aluminium Sand-cast, Hammer dimple enamel blue or Stainless Steel.
- Tool for Opening the Cover: Hook spanner 205 / 220 mm.
- Cable Entries: Manufacturer: Schroll, ATEX certification: IBExU06ATEX1070.
- Connecting Cable for Position Feedback: 3 pins shielded, min. external diameter 3.5 mm, max. external diameter 8.5 mm for cable gland M16.
- Connecting Cable for Supply Voltage, Controlling and Additional Switches: min. external diameter 11.0 mm, max. external diameter 14.2 mm for cable gland M20.
- Power Consumption: 5.5 VA and 6.5 VA for different variants.
- Power Output: 1.85 W.
- Current: 23 mA and 28 mA (230V/50Hz) for different variants.
- Capacitor: 0.18 µF / 500V and 0.22µF / 500V (230V/50Hz) for different variants.
- Gear Wheels: Front-toothed / ETG100.
- Torque: 30 Nm and 40 Nm for different variants.
- Electrical Connection: Compatible with ETAMATIC / ETAMATIC OEM and FMS / VMS.
- The document is subject to technical changes.
- Published by LAMTEC Meß- und Regeltechnik für Feuerungen GmbH & Co KG and LAMTEC Leipzig GmbH & Co KG.
- Document No.: DLT2141-16-aDE-005, Printed in Germany.
- Copyright 2016 LAMTEC.
Catalog excerpts
Technische Daten fur elektrischer Stellmotor EX-Zone 1, II2G Ex d IIC T6 Gb Zul. Umgebungstemperatur -20...+60°C Typ TA 130 LT, Bestell-Nr. 662R2140 / R2141 Drehmoment 6 / 20 / 30 / 40 Nm Technical data for electrically actuator EX-area 1, II2G Ex d IIC T6 Gb Perm. ambient temperature -20...+60°C Type TA 130 LT, order no. 662R2140 / R2141 Torque 6 / 20 / 30 / 40 Nm Sensoren und Systeme fur die Feuerungstechnik
Open the catalog to page 1
Typ TA 130 LT, LAMTEC Bestell-Nr. 662R2140 / R2141 in Variante “20Nm” Ansteuerung “Drei-Punkt-Schritt (DPS)” Type TA 130 LT, LAMTEC order no. 662R2140 / R2141 in variant “20Nm” Controlling “Three point step (TPS)”
Open the catalog to page 3
Typ TA 130 LT, LAMTEC Bestell-Nr. 662R2140 / R2141 in Variante “30Nm” Ansteuerung “Drei-Punkt-Schritt (DPS)” Type TA 130 LT, LAMTEC order no. 662R2140 / R2141 in variant “30Nm” Controlling “Three point step (TPS)”
Open the catalog to page 5
Typ TA 130 LT, LAMTEC Bestell-Nr. 662R2140 / R2141 in Variante “40Nm” Ansteuerung “Drei-Punkt-Schritt (DPS)” Type TA 130 LT, LAMTEC order no. 662R2140 / R2141 in variant “40Nm” Controlling “Three point step (TPS)”
Open the catalog to page 7
Typ TA 130 LT, LAMTEC Bestell-Nr. 662R2140 / R2141 in Variante “20Nm” mit elektronischer Regelung 4(20 mA Type TA 130 LT, LAMTEC order no. 662R2140 / R2141 in variant “20Nm” with electronic control 4.. .20 mA
Open the catalog to page 9
Typ TA 130 LT, LAMTEC Bestell-Nr. 662R2140 / R2141 in Variante “30Nm” mit elektronischer Regelung 4(20 mA Type TA 130 LT, LAMTEC order no. 662R2140 / R2141 in variant “30Nm” with electronic control 4.. .20 mA
Open the catalog to page 11
Typ TA 130 LT, LAMTEC Bestell-Nr. 662R2140 / R2141 in Variante “40Nm” mit elektronischer Regelung 4(20 mA Type TA 130 LT, LAMTEC order no. 662R2140 / R2141 in variant “40Nm” with electronic control 4.. .20 mA
Open the catalog to page 13
CAN-BNQ nicht anschliessen AnalogQusgangsmoduL Adresse 11 4 x Strom 0..20 mA Analogue output module 4 x current 0..20 mA S63R4029 Actuator with elec, controlling 4_20 mA Sollwert Kanal 2 [stetiqsr Ausqanq 200-999 —> 4_2Q mA Setpoint channel 2 Icantiniaus outputl LSB-Abschlusswiderstand termination resistor Zusatzlicher stetiger Ausgang Additional continious output ROckfiihrung Kanal 2 Poti 5 kR Feedback channel 2 Elektrischer Anschluss mit elektr. Regelung an FMS / VMSElectrical connection with electr. control to FMS / VMS
Open the catalog to page 15
Die Angaben in dieser Druckschrift gelten vorbehaltich technischer Änderungen LAMTEC Meß- und Regeltechnik für Feuerungen GmbH & Co KG LAMTEC Leipzig GmbH & Co KG Wiesenstraße 6 D-69190 Walldorf Telefon (+49) 06227 / 6052-0 Telefax (+49) 06227 / 6052-57 Internet: www.lamtec.de e-mail: [email protected] Überreicht durch:
Open the catalog to page 16All Lamtec catalogs and technical brochures
F130I4 Pages
ETAMATIC7 Pages
KS1D-HT7 Pages
KS1D-Ex3 Pages
KS1D without Housing4 Pages
KS1D in Housing5 Pages
KS1 without housing4 Pages
High Dust Mounting Flange2 Pages
BT3005 Pages
GKI3003 Pages
BurnerControl FA14 Pages
- LCD screen
- Monitor with touchscreen
- Panel-mount screen
- Valve actuator
- Interface software
- Simulation software solution
- Rotary valve actuator
- Electric valve actuator
- Gas burner
- 10" monitor
- Natural gas burner
- Production monitoring system
- Monitoring control system
- Indirect fired burner
- Process control system
- Flame detector
- Gas probe
- IR flame detector
- UV flame detector
- Pilot burner