KS1D in Housing

Product catalog summary

Overview: The KS1D Combination Probe is designed for simultaneous measurement of oxygen (O2) and unburnt residues (CO/H2) in exhaust gases. It includes a probe installation fitting and a gas extraction device, available in various lengths.

Specifications:

Measuring Range: O2: 0-21%, COe: 0-1,000 ppm (up to 10,000 ppm on request).
Precision: O2: ±5% of measured value, COe: ±25% of measured value.
Response Time: O2: t60 < 3s, t90 < 9s; COe: t60 < 9s, t90 < 13s.
Operating Temperature: Sensor operates at 650°C with a heating voltage of 13V.
Material: Probe housing made of 1.4571/1.4301 stainless steel.
Lifetime: Over 3 years with light fuel oil and natural gas.

Installation and Usage:

Mounting: Can be installed horizontally to vertically in exhaust gas channels.
Permissible Fuels: Gaseous hydrocarbons, light fuel oil, lignite, coal, and biomass.
Temperature Limits: Flue gas temperature on probe head < 450°C; operating temperature < 260°C on connecting cable.
Protection: Degree of protection is IP42.

Order Information:

Combination Probe: Standard model with FEP-connecting cable, 2m length, IP42.
Gas Extraction Device: Available in lengths of 150mm, 300mm, 450mm, and 1,000mm.
Probe Installation Fitting: Available in steel and stainless steel, with various screw-in joint options.

Contact Information: LAMTEC Meß- und Regeltechnik für Feuerungen GmbH & Co. KG, Wiesenstraße 6, D-69190 Walldorf, Germany. Phone: +49 (0) 6227 6052-0, Email: [email protected], Website: www.lamtec.de

Catalog excerpts

(+) probe signal O2/ COe (black) (-) probe signal COe (grey) probe heating (white) probe heating (white) (-) probe signal O2 (red or blue)

Open the catalog to page 1

O2: Information assumes an operating gas composition of 5 vol. % O2, rest is N2 COe: Information assumes an operating gas composition of 5 vol. % O2, 333 ppm COe, rest is N2 (333 ppm COe = 166.5 ppm H2 + 166.5 ppm CO)

Open the catalog to page 3

According to DIN V 18160-1:2006-01, seal tightness towards environment through housing and fastening. EN 16340:2014 D approval (in connection with LT3-F) only with gaseous and liquid fuels. In Connection with LT3-F max. 300 °C permissible flue gas temperature on probe head.

Open the catalog to page 4

Open the catalog to page 5

All Lamtec catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list