LAMBDA OMNICOLL Fraction Collector and Auto-Sampler FEATURES OF OMNICOLL SINGLE STREAM INCREASE NUMBER OF FRACTIONS TECHNICAL SPECIFICATION FEATURES OF OMNICOLL LAMBDA OMNICOLL fraction collector and auto-sampler allows almost unlimited flexibility – opens new possibilities in chromatography and multiple stream sampling. It can be used for all kinds of chromatographic techniques such as normal or low pressure chromatography (LPLC), medium pressure chromatography (MPLC), fast protein liquid chromatography (FPLC) or high pressure or high performance liquid chromatography (HPLC) and during cell culture, fermentations, chemical reactions, etc. The OMNICOLL can handle nearly all kinds of sampling tubes and laboratory sampling racks available on the market. Therefore, no special sampling tubes or racks are needed to collect the fractions. Safe handling (GMP/GLP) • Spill protected • Resistant to solvents • Use under sterile conditions Unlimited dimension • Micro titre plates, larger volume bottles, beakers, flasks, etc. • Unlimited number of fraction collection Multi-stream collection • Single stream • Simultaneous multi-stream fractions of up to 20 Highly flexible control • Volume / time / drop count / external siganl controlled fraction collection • Easy to program and handle

SINGLE STREAM FRACTION COLLECTION Free flowing stream Peristaltic pump controlled fraction collection (LAMBDA peristaltic pump or other pumps) Drop counter Any tube rack or recipients according to your choice (96-well plates, 24-well plates,… micro tubes, Eppendorf tubes, test tubes, beakers, bottles, flasks, etc.) Fraction collection in lines, row or meander-like (Zig-Zac) Pauses can be programmed between fractions (from 0.1 to 999.9 min and 1 to 9999 min) Remote control: TTL / external signal / RS-232 Highly safe for user with low voltage current (9 V / 12 W) Watch different fraction collection...

MULTI-CHANNEL FRACTION COLLECTION Multi-channel assembly is available from 2 up to 20 simultaneous streams based on the project requirements. OMNICOLL's customizable fraction collection assembly is not outperformed by any other fraction collector on the market. In case of pilot plants or industrial chromatographic application, bottom support plate can be removed to have any recipient, even very large bottles or containers for large volume fractions Special bottom support plate with funnels fitted with tubes, could also be used, for example, in collecting 50 litre fractions Excellent choice for...

INCREASE THE NUMBER OF FRACTIONS The modular construction of the LAMBDA OMNICOLL fraction collector-sampler allows coupling of several tube racks/recipients lower support units together to increase the number of samples collected by the fraction collector and sampler. Virtually any number of such capacity extensions can be added. Extended 30 mm tube rack capacity: 3 times Extended capacity of 250 ml bottles: 2 times Extended 15 mm tube rack capacity: 4 times (= 288 fractions) (= 72 fractions) (= 960 fractions) Virtually unlimited number of fractions with 'n' number of support extension according...

TECHNICAL SPECIFICATION Type: Collection mode: Normal modus: Time: Volume: High modus: Remote control: Normal modus: High modus: Capacity: Using supplied racks: LAMBDA OMNICOLL – microprocessor-controlled programmable fraction collector – sampler Linear (line), meander (zigzag) or row collection 0.1 to 999.9 minutes (16.67 hours) in 0.1 min steps or 1 to 9999 minutes (166.7 hours) in 1 min steps 0.01 to 500 ml or 0.6 to 30 litres (external counts using LAMBDA peristaltic pump) same as Normal modus, but with a pause between fractions (from 0.1 to 999.9 minutes or 1 to 9999 minutes) Collector takes...

LAMBDA CZ s.r.o. Lozíbky 1 CZ-61400 Brno CZECH REPUBLIC – EUROPE LAMBDA Laboratory Instruments Sihlbruggstrasse 105 CH-6340 Baar SWITZERLAND – EUROPE E-mail: [email protected] Website: www.fractioncollector.info Ask for Quotation Request call back Email contact