1. Catalogs
  2. LAIRD TECHNOLOGIES
  3. Power-Over-Ethernet
video corpo

Power-Over-Ethernet
1 /2Pages

Power-Over-Ethernet

Power-Over-Ethernet
1 /2Pages

Catalog excerpts

Power-Over-Ethernet-1

Innovative Technology for a Connected World POWER-OVER-ETHERNET Power Supply / Inserter The POE-xxi is an advanced power supply / power inserter. The power supply is autoranging on the input and has a regulated voltage output. It has overload and short circuit protection in addition to Ethernet surge suppression built-in. The POE-xxi is not a proprietary unit. It will function with any equipment that is compliant with the IEEE 802.3af POE standards. For all “i” models, the power is supplied on ethernet pins 4/5 (V+) and 7/8 (V-). For the “iR” models, the power is supplied on Ethernet pins 4/5 (V-) and 7/8 (V+). The POE-xxi comes complete with a standard North American 115 VAC power cord. International cords are available upon request. A Current Indicator (-CI) model is available. The LED will be AMBER until >35 mA current flows to the end device which will turn the LED to GREEN. This is a good way to remotely monitor the connection between the Power-Over-Ethernet (POE) and the end device, and to indicate that the end device is turned on. To order this model, add a “–CI” suffix to the standard part number. Using POE to power remote devices has several advantages including; • he power supply can be centrally located where it can be attached to T an uninterruptible power supply. • he user has the ability to easily power on reset the attached equipment T from a remote location. • here is no need to run additional power cabling to the device as power T can be supplied over the CAT5 ethernet cable. • Auto ranging power supply/ inserter • Remote networking equipment • uilt-in Ethernet surge protection to prevent B equipment damage • SOHO equipment • Overload and short circuit protection • Minimum cross-talk and insertion loss • Advanced switching technology – runs cool • “Carrier class” power over ethernet system • owers clients which accept power on P unused Ethernet pins 4, 5, 7, 8 • FCC and CE approved • Current indicator (CI) option available global solutions: local support Americas: +1.847 839.6907 [email protected] Europe: +1.32.80.7866.12 [email protected] Asia: +1.65.6.243.8022 [email protected] • Remote routers, access points and bridges

 Open the catalog to page 1
Power-Over-Ethernet-2

Innovative Technology for a Connected World POE-xxi POWER SUPPLY/INJECTOR Input Voltage Input Current Inrush Current Output Voltage SYSTEM ORDERING: POE-48i 48 VDC @ .50 A POE Power Supply / Inserter POE-24i 24 VDC @ .8 A POE Power Supply / Inserter Output Ripple Switching Frequency Line Regulation Load Regulation Operating Temperature Storage Temperature Operating Humidity POE-24iR Reverse Polarity 24 VDC @ .8 A POE Power Supply / Inserter (Pins 4/5 V-, Pins 7/8 V+) * All include AC Power Cord (Amber) Green Surge Protection Common Mode Clamping Voltage POE-12i 12 VDC @ 1.3 A POE Power Supply...

 Open the catalog to page 2

All LAIRD TECHNOLOGIES catalogs and technical brochures

  1. THR-UM-AA-230

    8  Pages

  2. THR-BRO-Thermal

    19  Pages

  3. YS3805

    1  Page

  4. YF45018

    2  Pages

  5. YF880012

    2  Pages

  6. YF88008

    2  Pages

  7. YF450112

    2  Pages

  8. SIAMnet

    12  Pages

  9. BL620 Series

    2  Pages

  10. EMI CATALOG

    116  Pages

  11. RFID Antennas

    18  Pages

  12. WLAN Antennas

    44  Pages

  13. EMI ESSENTIALS

    36  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.