Multi-band Survivor™ Innovative Technology for a Connected World MULTI-BAND SURVIVOR™ (LTE, EVDO & GPS) The Laird Technologies Multi-band Survivor™ is a rugged, high-performance multi-band vehicular antenna that covers the LTE, EVDO and GPS frequencies. It is designed to withstand demanding environments and maintain superior RF performance. The antenna can be shipped and installed on a vehicle with the LTE whip detached, and the whip can be installed at a later time (if needed). LTE ELECTRICAL SPECIFICATIONS EVDO ELECTRICAL SPECIFICATIONS AKIT-GPSS746MP-001 LTE (BC12/BC14) Frequency Range Efficiency EVDO 800/1900 Frequency Range Efficiency Average Gain Nomimal Impedance Nomimal Impedance Polarization Typical Power Handling Pattern Typical Power Handling GPS ELECTRICAL SPECIFICATIONS AKIT-GPSS746MP-001 GPS Frequency Nomimal Impedance Supply Voltage Noise Figure Out of Band Rejection Two tone IIP2 with -20 dBm CW signals at 2405 and 829.58 MHz (dBm) @ 1575.42 MHz 2nd Harmonic product caused by input of +10 dBm CW signal @ 787.71 MHz (dBm) @ 1575.42 MHz global solutions: local support Americas: +1.847 839.6907 [email protected] Europe: +1.32.80.7866.12 [email protected] Asia: +1.65.6.243.8022 [email protected]

Innovative Technology MECHANICAL SPECIFICATIONS Weight (Mass) Base Dimensions Rated Wind Velocity Operating Temperature JUMPER SPECIFICATIONS (Part Number) Cable Type Cable Diameter Cable Length EVDO Jumper CABLE SPECIFICATIONS_ Cable Diameter Connector Type Any information furnished by Laird Technologies, Inc. and its agents application of Laird Technologies materials rests with the end user, si fitness, merchantability or suitability of any Laird Technologies mater is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and...