Innovative Technology for a Connected World POWER-OVER-ETHERNET Power Supply / Inserter The active Power-Over-Ethernet (POE) splitter from Laird Technologies gives “carrier class” performance in a low cost system. With its IEEE 802.3af compatibility and advanced autosensing algorithm, it will accept POE power from any IEEE 802.3af router or power supply. The overload and short circuit protection will shut down power immediately when a short circuit is detected without any damage to the POE system. Power (36 to 60 V) is expected on ethernet pins 4/5 (V+) and 7/8 (V-) as per the IEEE 802.3af standard or pins 1,2,3,6 (Cisco Standard). Using POE to power remote devices has several advantages including; • he power supply can be centrally located where it can be attached T to an uninterruptible power supply. • Power can be supplied over long distances, up to 300 feet. • Power can be available wherever network access is available. • he user has the ability to easily power-on reset the attached T equipment from a remote location. The active POE splitter from Laird Technologies can be used by the original equipment manufacturer to supply power to remote equipment and devices without the expense of building in separate POE functionality into their equipment. These devices are a good fit for the industrial market for sensing and remote video applications. • Choice of 5, 9, 12 or 24 VDC regulated power • Remote networking equipment • SOHO equipment • Advanced auto-sensing intelligent algorithm • Overload and short circuit protection • VOIP systems • Advanced switching technology – runs cool • Complies with IEEE 802.3af POE standard • IEEE 802.3af POE active splitter • FCC and CE approved • Compatible with IEE 802.3af routers including Cisco and Netgear global solutions: local support Americas: +1.847 839.6907 [email protected] Europe: +1.32.80.7866.12 [email protected] Asia: +1.65.6.243.8022 [email protected] • Remote routers, access points and bridges

Power Over Ethernet Innovative Technology for a Connected World ACTIVE SPLITTER WITH ISOLATION Input Voltage Output Voltage Output Ripple Switching Frequency Line Regulation Load Regulation Isolation Voltage Isolation Resistance Input Set Class Resistance Operating Temperature Storage Temperature Operating Humidity 12 in Cable with RJ45 Plug 12 in Cable with 5.5 x 2.1 x 12 mm Adapter Plug COMPLIANCE: SYSTEM ORDERING: POE-5s-afi 5 VDC 2.4 A Active 802.3af POE Splitter with isolation POE-9s-afi 9 VDC 1 A Active 802.3af POE Splitter with isolation POE-12s-afi 12 VDC .67 A Active 802.3af POE Splitter...