Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. LAIP
  3. Catalog general

Catalog general

Catalog general
1 / 310 PagesView full catalog

Catalog general

Product catalog summary
Specifications:
The document details specifications for tool holders and adapters, including Weldon holders, shrink fit chucks, and blank toolholders. Key specifications include a maximum circular deviation of ≤ 0.003 for some products and ≤ 0.00012" for others, dynamic balancing capabilities up to 50,000 r.p.m., and compliance with ISO 1940-1 standards.
Procedures:
For optimal performance, the document specifies tighter tolerances for diameter D1 and circular deviation compared to DIN 1835 standards. It provides detailed dimensions and tolerances for tool holders, including those for carbide, cermet, and HSS tool shanks with tolerance h6.
Standards:
Products are balanced according to ISO 1940-1 standards up to 15,000 r.p.m. (G 2.5) and reference CAT/ANSI B5.50 - 1994 and DIN 2080 standards for certain tool holders.
Recommendations:
Contact the supplier for dynamic balancing needs and other dimensions not listed. Use built-in bored through stop screws for coolant passage.
Limitations:
Products are unavailable in several countries, including Switzerland, Germany, France, Great Britain, Liechtenstein, Sweden, USA, Japan, China, and Korea.
Material and Construction:
Tool holders are made from case-hardening alloy steel, case-hardened and tempered, with a minimum core strength of 880 N/mm2 and a surface hardness of Rc 57 ÷ 60. Taper tolerance is Grade AT3.
Key Data from Tables:
Tables provide detailed dimensions for tool holders, including diameter, length, and tolerances, with specific codes for each product type.
Tool Adapters and Specifications:
Various tool adapters are listed with codes and specifications, including tool shank diameters from 6 to 32 mm, indicating compatibility with different tool holders.
Nut Tightening and Untightening Machine:
Describes a machine for tightening and untightening nuts of various chucks, operable manually or automatically, with torque force input via a display.
Toolholder Trolley:
A large trolley for toolholders, featuring wheels, brakes, trays with steel handles, and plastic supports, supplied dismantled with specific dimensions.
Force Control Bar:
This tool reduces tool vibration and wear, measuring clamping force to the drawbar, aiding in maintenance and preventing machine damage.
Shrink Fit System:
Explains the shrink fit system using thermal expansion to secure tools, highlighting advantages like high concentricity, safety, and reliability.
Balancing Information:
General information on dynamic balancing, referencing ISO-1940/1 standards, with a graph illustrating maximum allowable residual unbalance.
Introduction to Balancing:
Balancing controls mass distribution on rotating parts to prevent centrifugal forces, affecting tool life and reliability, defined by ISO 1940-1.
Toolholder Balancing:
LAIP uses advanced methods for dynamic balancing of toolholders, adhering to ISO 1940-1 standards, with a recommended quality of G 6.3.
Balancing Necessity:
High-speed machining is defined as operations over 8,000 RPM; below this, balancing is unnecessary unless toolholders are highly asymmetrical.
Rotary Coolant Adapters Setup Instructions:
1. Secure the coolant origin and tube, tighten the fixing ring bolts.
2. Ensure the fixing ring does not touch the aluminum body.
Important Guidelines:
1. Never operate without coolant.
2. Maintain a minimum space of 6 mm between the coolant tube contact and machine nose.
Specifications:
- Maximum RPM: 6,000
- Maximum coolant pressure: 20 bar
- Minimum coolant pressure: 2 bar
Contact Information:
LAIP, Arzubia kalea, 2 - Bº Matiena, E-48220 Abadiano (Bizkaia), Spain
Tel: +34 94 621 76 90
Fax: +34 94 681 65 08
Website: www.laip.es / www.laip.eu
Export Dept: [email protected]
Sales Spain: [email protected]
See more

Catalog excerpts

Catalog general -1

GENERAL CATALOGUECATLOGO GENERAL >

 Open the catalog to page 1
Catalog general -2

HSK DIN 69893 FORM A, C, E & FHSK DIN 69893 FORMA A, C, E & FDIN 69871DIN 69871 > MAS 403 BTMAS 403 BTMAS 403 BT (DOUBLE CONTACT)MAS 403 BT (DOBLE CONTACTO)CAT / ANSI B5.50 - 1994CAT / ANSI B5.50 - 1994DIN 2080DIN 2080MORSE & QUICK CHANGE SYSTEMMORSE & SISTEMA CAMBIO RPIDOCHIRONCHIRONMODULAR; BORING HEADSMODULAR; CABEZAR DE MANDRINARCILINDRICALCILINDRICOR-8 (BRIDGEPORT)R-8 (BRIDGEPORT)AXIALLY AJUSTABLE DIN 6327/ISO 2905REGULACISN AXIAL DIN 6327/ISO 2905CILINDRICAL DIN 1835CILINDRICO DIN 1835COLLETS & TAPPING ADAPTERSPINZAS Y ADAPTADORES PORTAMACHOSPULL STUDSTIRANTESACCESORIESACCESORIOSOTHER ACCESSORIES...

 Open the catalog to page 2
Catalog general -3

? Ex Works ABADIANO, Taxes and freight not included.? Are subject to change due ti technical omprovements and possible print mistakes. > ? Ex main Warwhouse ABADIANO. ? Standard packaging included. > ? Please take note no return will be accepted after 15 days of delivery, unless becauseof manufacturing faults or wrongly shipped by LAIP.? Written notification shall be provided and accepted by LAIP. ? Handling of a return shipment are subject to a charge of 15% of the value of the goods,but not least than 20 e . > ? All goods at the property of LAIP, S.A. until full payment has been received. >...

 Open the catalog to page 3
Catalog general -4

HSK DIN 69893 FORM A, C, E & FHSK DIN 69893 FORMA A, C, E & F 1 >

 Open the catalog to page 4
Catalog general -5

DIN 69893-1 FORM A for automatic change DIN 69893-1 FORMA A para cambio automtico > DIN 69893-1 FORM A for manual change DIN 69893-1 FORMA C para cambio manual > DIN 69893-2 FORM B for automatic change DIN 69893-2 FORMA B para cambio automtico > DIN 69893-2 FORM D for manual change DIN 69893-2 FORMA D para cambio manual > DIN 69893-5 FORM E for automatic change DIN 69893-5 FORMA E para cambio automᡡtico > DIN 69893-6 FORM A for automatic change DIN 69893-6 FORMA C para cambio automtico > 17/12 ).? PLEASE CONTACT US FOR FURTHER INFORMATION. ? CONTAMOS CON MODERNOS MEDIOS PARA ELEQUILIBRADO DINMICO...

 Open the catalog to page 5
Catalog general -6

- DENOMINACION Pag.DESCRIPTION - DENOMINACION Pag.DESCRIPTION > - DENOMINACION Pag.DESCRIPTION - DENOMINACION Pag.DESCRIPTION > COLLET CHUCKS ER TYPE (DIN 6499) - DENOMINACION Pag.DESCRIPTION - DENOMINACION Pag.DESCRIPTION > - DENOMINACION Pag.DESCRIPTION - DENOMINACION Pag.DESCRIPTION > - DENOMINACION Pag.DESCRIPTION - DENOMINACION Pag.DESCRIPTION >

 Open the catalog to page 6
Catalog general -8

TYPETIPOTOOL HERRAMIENTALENGTHLONGITUD

 Open the catalog to page 8
Catalog general -9

TYPE TIPO TOOL HERRAMIENTA LENGTH LONGITUD

 Open the catalog to page 9
Catalog general -12

TYPETIPO OUTSIDE EXTERIORLENGTH LONGITUD

 Open the catalog to page 12
Catalog general -13

TYPETIPOTHREAD ROSCALENGTHLONGITUD S M L DGDHSK-A D > LENGTH - LONGITUDL 1 D > 2 L > 1 2 COD.L Suministro >

 Open the catalog to page 13
Catalog general -14

TYPETIPO maxLENGTHLONGITUD M L DHSK- A D > LENGTH - LONGITUDL 1 mءx D COD.004 14 05 04 06004 14 05 06 06 > OPCIONAL

 Open the catalog to page 14
Catalog general -15

SM DHSK-A > LENGTH - LONGITUDL COD.Form >

 Open the catalog to page 15
Catalog general -16

TYPETIPO maxLENGTHLONGITUD S DHSK- A > LENGTH - LONGITUDL COD.FormAD+B >

 Open the catalog to page 16
Catalog general -18

TYPETIPOTOOL HERRAMIENTALENGTHLONGITUD

 Open the catalog to page 18
Catalog general -19

TYPETIPOTOOL HERRAMIENTALENGTHLONGITUD Alternative solutions >

 Open the catalog to page 19
Catalog general -20

003 14 54 + 012 54 04 pgs. 1/9 y 9/8Soluciones alternativasAlternative solutions > TYPETIPOTOOL HERRAMIENTALENGTHLONGITUD

 Open the catalog to page 20
Catalog general -21

TYPETIPOTOOL HERRAMIENTALENGTHLONGITUD

 Open the catalog to page 21
Catalog general -22

TYPETIPO TOOL HERRAMIENTA LENGTH LONGITUD

 Open the catalog to page 22
Catalog general -23

TYPETIPOTOOL HERRAMIENTALENGTHLONGITUD

 Open the catalog to page 23
Catalog general -24

TYPETIPOTOOL HERRAMIENTALENGTHLONGITUD

 Open the catalog to page 24
Catalog general -25

TYPETIPO TOOL㩘 HERRAMIENTALENGTHLONGITUD

 Open the catalog to page 25
Catalog general -26

TYPETIPOTOOL㩘 HERRAMIENTA LENGTHLONGITUD

 Open the catalog to page 26
Catalog general -27

ML DHSK-ACOD.GL D > LENGTH - LONGITUDL 1 D > 2 L > 1 2 Performance: Ejecucin: Delivery: Suministro: Design: Utilizacin: >

 Open the catalog to page 27
Catalog general -28

TYPETIPOTOOL㩘 HERRAMIENTALENGTHLONGITUD DHSK-A > LENGTH - LONGITUDL D > 1 D > 2 D > 3 D > 4 L > 1 L > 2 L > 3 Performance: Ejecucin: Delivery: Suministro: Design: Utilizacin: >

 Open the catalog to page 28
Catalog general -31

TYPETIPO LENGTH LONGITUD

 Open the catalog to page 31
Catalog general -32

DIN 69893-1 Form CJanuary 1996 DIN 69893-1 Forma C Enero 1996 Material Dh10 D DHSK-C > 1 B 30,04 L > 1-0,2 2 JS10 F > 5-0,1 a 3240 50 63 80100L Material >

 Open the catalog to page 32
Catalog general -35

TYPETIPOTOOL HERRAMIENTALENGTHLONGITUD

 Open the catalog to page 35
Catalog general -37

DIN 69893-5 Form ENovember 2006 DIN 69893-5 Forma E Noviembre 2006 D Material Dh10D D L DHSK-E > 1 2 mx.D > 3-0,1 4 1-0,2 2 JS10L L > 30,1 1-0,1 F > 2 mᱭn.a d > 7 2532 40 50 63F Material >

 Open the catalog to page 37
Catalog general -38

TYPETIPOTHREAD ROSCALENGTHLONGITUD

 Open the catalog to page 38
Catalog general -39

TYPETIPOTYPETIPO LONGITUD

 Open the catalog to page 39
Catalog general -43

SML DHSK-E > LENGTH - LONGITUDL D > 1 D > 2 D > 3 L > 1 2 COD.GL Performance: Ejecucin: Delivery: Suministro: Design: Utilizacin: >

 Open the catalog to page 43
Catalog general -44

TYPETIPOTOOL㩘 HERRAMIENTALENGTHLONGITUD

 Open the catalog to page 44
Catalog general -45

TYPETIPOTOOL㩘 HERRAMIENTALENGTHLONGITUD

 Open the catalog to page 45
Catalog general -47

DIN 69893-6 Form FMay 2003 DIN 69893-6 Forma FMayo 2003 DHSK-F Dh10D D > 1 D > 2 mx.D > 3-0,1 4 1-0,2 L > 2 JS10L L > 30,1 1-0,1 F > 2 mᱭn.a d > 7 63F Material Material >

 Open the catalog to page 47
Catalog general -48

M D1 SIZETAMAO D > 1 LENGTH - LONGITUDL D > 2 GDHSK-F COD. 004 19 06 04 03 - - > - OPTIONAL - OPTIONAL - - >

 Open the catalog to page 48
Catalog general -51

M DHSK-F D > LENGTH - LONGITUDL 1 L > 1 COD. 020 19 02 04 71 >

 Open the catalog to page 51
Catalog general -56

FORM AD FORMA A Material:Case-hardening alloy steel. Case-hardened and tempered.Minimum strength in core 880 N/mm FORM B > 2 .Surface hardness Rc 57 60Taper tolerance: Grade AT3 Material:Acero aleado de cementacin. Cementado y templado.Resistencia m糭nima en el ncleo 880 N/mm . FORMA B > 2 .Dureza superficial Rc 57 60Tolerancia de conicidad: Calidad AT3. FORM A GD FORM AD + B D KD D > 6 0-0.1 1 0-0.3 L > 3 m귭n.L L > 5 0-0.3 L > 6 0-0.4 L > +0.1 1 2 3 H7D > 5ֱ0.05 8 mx. > 9 7 0-0.4 E ? WE HAVE THE LATEST METHODS FOR DYNAMIC BALANCING OF OUR TOOLHOLDERS (see page 17/2).? PLEASE CONTACT US FOR FURTHER...

 Open the catalog to page 56
Catalog general -58

TYPETIPOTOOL HERRAMIENTALENGTHLONGITUD

 Open the catalog to page 58
Catalog general -59

TYPETIPOTOOL HERRAMIENTALENGTHLONGITUD

 Open the catalog to page 59
Catalog general -60

TYPETIPOTOOL HERRAMIENTALENGTHLONGITUD

 Open the catalog to page 60
Catalog general -61

M Alternative solutions00312 54 + 001 54 50 pgs. 2/15 1333Soluciones alternativasAlternative solutions B - J y 9/4 > K D1 L K > LENGTH - LONGITUDL DIN 69871 1 COD.Form AD >

 Open the catalog to page 61
Catalog general -63

M DIN 6364 (DIN 2201) > K K1 G D L DIN 69871 K > LENGTH - LONGITUDL 1 DGCOD.Form A 003 13 04 02 50003 13 04 04 50003 13 04 04 60K without driving slot see page / / / >

 Open the catalog to page 63
Catalog general -66

TYPETIPO LENGTHLONGITUD

 Open the catalog to page 66
Catalog general -67

M Alternative solutions 003 13 32 pg. 2/14Soluciones alternativasAlternative solutions > K K1 G D L K K > - LONGITUDL DIN 69871LENGTH 1 DGCOD.Form AD 003 13 31 04 02 >

 Open the catalog to page 67

All LAIP catalogs and technical brochures

  1. LAIP S.A New products for 2020
    LAIP S.A New products for 2020

    13  Pages

  2. CAT/ANSI TAPER
    CAT/ANSI TAPER

    4  Pages

  3. CHIRON TAPER
    CHIRON TAPER

    8  Pages

  4. HYDRAULIC TOOLHOLDERS
    HYDRAULIC TOOLHOLDERS

    4  Pages

  5. MODULAR TOOLING
    MODULAR TOOLING

    20  Pages

  6. DIN 2080
    DIN 2080

    26  Pages

  7. POLYGONAL ISO 26623-1
    POLYGONAL ISO 26623-1

    6  Pages

  8. JIS BT 6339
    JIS BT 6339

    36  Pages

  9. DIN 69893 HSK
    DIN 69893 HSK

    56  Pages

  10. DIN 2080
    DIN 2080

    34  Pages

  11. MAS 403 BT(DOUBLE CONTACT)
    MAS 403 BT(DOUBLE CONTACT)

    14  Pages

  12. MAS 403 BT
    MAS 403 BT

    38  Pages

  13. PULL STUDS
    PULL STUDS

    10  Pages

  14. COLLETS & TAPPING ADAPTERS
    COLLETS & TAPPING ADAPTERS

    13  Pages

  15. CILINDRICAL DIN 1835
    CILINDRICAL DIN 1835

    4  Pages

  16. AXIALLY AJUSTABLE DIN 6327/ISO 2905
    AXIALLY AJUSTABLE DIN 6327/ISO 2905

    6  Pages

  17. R-8 (BRIDGEPORT)
    R-8 (BRIDGEPORT)

    7  Pages

  18. CILINDRICAL
    CILINDRICAL

    7  Pages

  19. MODULAR; BORING HEADS
    MODULAR; BORING HEADS

    21  Pages

  20. CHIRON
    CHIRON

    11  Pages

  21. MORSE & QUICK CHANGE SYSTEM
    MORSE & QUICK CHANGE SYSTEM

    21  Pages

  22. CAT / ANSI B5.50 - 1994
    CAT / ANSI B5.50 - 1994

    4  Pages

Archived catalogs

  1. DIN 69871
    DIN 69871

    36  Pages

  2. DIN 69871 TAPER
    DIN 69871 TAPER

    40  Pages

  3. HSK DIN 69893 FORM A,C,E,F
    HSK DIN 69893 FORM A,C,E,F

    56  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.