- Catalogs
- Laguna tools
- Fusion 2 Tablesaw
Fusion 2 Tablesaw
Fusion 2 Tablesaw
This technical manual provides comprehensive guidance for the Laguna Tools Fusion 2 Tablesaw, aimed at woodworkers who have purchased this product. It includes specifications, setup instructions, maintenance guidelines, and safety precautions.
The Fusion 2 Tablesaw features a 10-inch maximum blade diameter, 5/8-inch arbor diameter, and 4500 RPM arbor speed. It supports an 8-inch maximum dado diameter and 13/16-inch dado width. The rip capacity is 36 inches to the right and 17 inches to the left, with an optional 52-inch extension. The table dimensions are 27 inches by 44 inches with extensions, and it operates on a 1PH, 115V (or optional 230V) motor with 1-3/4 HP.
Laguna Tools offers a two-year warranty effective from the shipping date, requiring registration within 30 days of purchase. The warranty covers defects in workmanship, parts, and materials, excluding misuse, lack of maintenance, or unauthorized modifications.
Detailed setup instructions include receiving and unpacking, inventory checks, and installation of components like the throat plate and blade. Maintenance procedures cover adjustments for the fence, table, arbor, and tilt.
General safety guidelines emphasize proper procedures to prevent injury and damage, with references to additional resources for safe woodworking practices.
Technical support is available via phone, fax, email, or the Laguna Tools Customer Support Website. Replacement parts under warranty are shipped at no cost, but installation labor is the user's responsibility.
The manual includes wiring diagrams, parts diagrams, and a parts list for the Fusion 2 Tablesaw, along with troubleshooting tips and a map of internal components.
The tablesaw is designed for industrial use with a 3HP motor and an electromagnetic starter. It includes a precision arbor, quick release blade guard attachments, and a 2:1 assisted tilt mechanism.
Emphasizes keeping the work area clean, using proper personal protective equipment, and ensuring all guards are in place. Electrical safety includes disconnecting power before servicing and using grounded connections.
The tablesaw operates on a single-phase 115V or 230V power supply with a motor speed of 3450 RPM, requiring a full load amperage of 14 Amp at 115V or 7 Amp at 230V.
Available accessories include a Fusion 52" Rip Capacity Expansion Table and various blades, including 10" alternate top bevel and triple chip bevel blades, as well as an 8" dado set.
The Laguna Tools Fusion Tablesaw is a precision machine with key components like the start/stop control switch, rip fence, miter gauge, and blade guard.
Features a lockable on/off switch, arbor height and tilt controls, and a fence clamp lock. Adjustments should not be made when the controls are locked.
Setting up the tablesaw requires caution due to its weight. A setup video is available online for guidance.
Inspect for shipping damage and check the inventory upon receiving the tablesaw.
Assembly involves attaching and leveling fence supports and rails, inserting the fence, and leveling the saw using casters.
Instructions are provided for installing and removing the riving knife and blade guard.
To change the blade, unplug the saw, remove safety accessories, and use the arbor wrench to remove the blade.
Follow similar precautions as blade installation to prevent jamming.
Requires caution and safety gear. Ensure the throat plate is locked and the saw is unplugged before starting.
Provides detailed instructions and guidelines for operation, adjustment, and maintenance, including safety precautions, fence adjustments, table and arbor adjustments, accessory adjustments, maintenance schedules, troubleshooting, and wiring diagrams.
Ensure the tablesaw is unplugged before performing any adjustments or maintenance.
Instructions for adjusting the fence glide bushings, scale, and ensuring the fence is parallel to the blade.
Instructions for ensuring the table is parallel to the blade using tools like a combination square or dial indicator.
Details on adjusting the blade tilt limits and belt tension.
Instructions for aligning the riving knife, blade guard, and splitter with the blade.
Daily, weekly, monthly, and bi-annual maintenance tasks are outlined.
A comprehensive guide addresses common issues with possible causes and solutions.
Included for the Fusion F2 110V/220V to assist with electrical troubleshooting and repairs.
Provides technical specifications, wiring instructions, and parts lists for the Laguna Fusion 2 and Fusion 3 tablesaws.
The Fusion 2 tablesaw is initially wired for 110/115V and requires a new switch assembly for 220V conversion. The Fusion 3 tablesaw is designed for 230V and cannot be converted to 110V.
For the Fusion 2, a 220V switch assembly is necessary for conversion.
Detailed parts diagrams and a comprehensive parts list are provided.
Both models feature a redesigned trunnion and arbor for smooth operation and accuracy.
Laguna Tools emphasizes user adjustability and precision in their design.
Catalog excerpts
2072 Alton Parkway Irvine, CA 92606 U.S.A. www.lagunatools.com For Customer Service: 1-949.474.1200 [email protected] Fusion 2 Tablesaw MTSF236110175-0130 MTSF252110175-0130 © 12/2017, Laguna Tools, Inc.
Open the catalog to page 1
FUSION 2 TMLESW MTSF236110175 I © 10/2017, Laguna Tools, Inc. Max Blade Diameter Arbor Diameter Arbor Speed Max Dado Diameter Max Dado Width Rip Capacity, with Fence Maximum Depth of Cut @ 90° Maximum Depth of Cut @ 45° Blade Tilt 45° Left, 3° Arbor Adjustment Table Dimension, with Extensions (LxWxth.)27"Lx 44"Wx 1-1/2'th. (cm: 68.58,111.76, 3.81) Extension Wing Dimesnsion (LxW) Mitre Slot Fence Type Fence Face Dimensions (LxWxth.) Throat Plate Type Throat Plate Dimensions (LxWxth.) Floor to Table Height Phase Voltage Motor Type Horsepower Motor Speed Cycle Full Load Amperage Start Capacitor Run...
Open the catalog to page 2
Setup & maintenancE Manual Set-up Video 2072 Alton Parkway Irvine, CA 92606 U.S.A. www.lagunatools.com For Customer Service: 1-949.474.1200 [email protected] For Customer Service: 1-800-332-4014 [email protected] Fusion Tablesaw © 12/2017, Laguna Tools, Inc.
Open the catalog to page 3
Fusion Tablesaw Dear Woodworker Thank you for your purchase and welcome to the Laguna Tools group of discriminating woodworkers. We understand that you have a choice of where to purchase your machines and appreciate the confidence you have in the Laguna Tools brand. Every machine sold by Laguna Tools has been carefully designed and well thought through from a woodworker’s perspective. Through hands-on experience, Laguna Tools is constantly working hard to make innovative, precision products. Products that inspire you to create works of art, are a joy to run and work on, and encourage your performance....
Open the catalog to page 4
Fusion Tablesaw
Open the catalog to page 5
Fusion Tablesaw Advertised Name Stock Model Professional Square Zero Clearance Throat Plate (pre-installed) 10" 40T Blade (pre-installed) Riving Knife (pre-installed) Mitre Gauge (ships in tool holder) Tool Holder (pre-installed) Fence Blade Guard Arbor Wrench Installation and Adjustment Tools Voltage Motor Type Horsepower Motor Speed Cycle Full Load Amperage Start Capacitor Run Capacitor Switch Type Power Transfer Power Cord Power Plug Included NEMA Breaker Recommendation 230V TEFC Capacitor Start AC Induction 3 HP 3450 RPM 60 Hz. 14 Amp. 300 piF-U 50 pF-U Magnetic with Overload Protection Single...
Open the catalog to page 6
Fusion Tablesaw Throat Plate Type Professional Square Zero Clearance Throat Plate Dimensions (LxWxth.) 14-5/8"L x 4-1/16"W x 1/2"th. (cm: 37.15, 10.32, 1.27) Floor to Table Height 34-3/4" (88.27cm) TOP 10 FEATURES Newly designed precision arbor mounted directly to cabinet top. Height adjustment moves straight up easily with mechanical assist. Arbor tilt is now on 2:1 ratio gear box. The new Laguna Arbor is Sturdy and built to last. Perfectly flat and precision ground mirror finished tabletop. Designed for industrial use. The Fusion F3 features an industrial strength 3HP motor, increased...
Open the catalog to page 7
Fusion Tablesaw Advertised Name SHORT SKU UPC Stock Model Professional Square Zero Clearance Throat Plate (pre-installed) 10" 40T Blade (pre-installed) Riving Knife (pre-installed) Mitre Gauge (ships in tool holder) Tool Holder (pre-installed) Fence Blade Guard Arbor Wrench Installation and Adjustment Tools Phase Voltage Motor Type Horsepower Motor Speed Cycle Full Load Amperage Start Capacitor Run Capacitor Switch Type Power Transfer Power Cord Power Plug Included NEMA Breaker Recommendation Notes: Foot Print (LxW) Overall Dimensions (LxWxH) Shipping Dimensions (LxWxH) Net Weight (No Accessories) Shipping...
Open the catalog to page 8
Fusion Tablesaw Throat Plate Type Professional Square Zero Clearance Throat Plate Dimensions (LxWxth.) 14-5/8"L x 4-1/16"W x 1/2"th. (cm: 37.15, 10.32, 1.27) Floor to Table Height 34-3/4" (88.27cm) TOP 10 FEATURES Newly designed precision arbor mounted directly to cabinet top. Height adjustment moves straight up easily with mechanical assist. Arbor tilt is now on 2:1 ratio gear box. The new Laguna Arbor is Sturdy and built to last. Perfectly flat and precision ground mirror finished tabletop. Designed for user adjustability. Every accessory and control is adjustable to ensure the saw...
Open the catalog to page 9
Fusion Tablesaw General Safety warning: Read all safety considerations. Failure to follow this set of guidelines can result in unwarranted damage to the machine and serious injury to the operator and bystanders. Work area KEEP ALL CHILDREN AND UNTRAINED PERSONS AWAY FROM THE MACHINE. Do not allow bystanders to touch the machine or power cord. All people but the operator should be away from the work area. KEEP WORK AREA CLEAN. A cluttered area can limit the range of motion needed by the machine and cause serious injury to the operator or damage to the machine. MAKE SURE THE WORK AREA IS CHILD-PROOF...
Open the catalog to page 10
Fusion Tablesaw GENERAL SAFETY ELECTRICAL DISCONNECT THE POWER FIRST. Always disconnect machine from power supply BEFORE adjusting, changing tooling, or servicing machine. USE A QUALIFIED ELECTRICIAN FOR ALL ELECTRICAL CONNECTIONS. Failure to do so may result in damage to the tool and electrical shock to the operator and bystanders. POWER PLUGS. Your machine may not come with a power plug because of the variance in power receptacles. Consult with a local electrician prior to purchasing a power plug. EXTENSION CORDS. Consult with or use a qualified electrician prior to sizing extension cords for...
Open the catalog to page 11
Fusion Tablesaw Tool Overview Your new Laguna Tools machine is comprised of different components to make a long lasting and precise piece of machinery that will help you with your next project. Understanding your new machine and its components will make you a better craftsman. The basic components of the table saw are: 1. 2. 3. 4. 5. Start/Stop Control Switch Rip Fence Fence Front Guide Fence Rear Guide Table with Miter Slots Cabinet with integrated mobility kit Arbor Height adjustment control Arbor Tilt adjustment control Dust Extraction outlet. Motor Cover Tool Holder Throat Plate Blade Blade...
Open the catalog to page 12All Laguna tools catalogs and technical brochures
T|Flux48 Pages
REVO 18/36 LATHE MANUAL56 Pages
IQ HHC CNC Router Manual46 Pages
14/BX Bandsaw Manual72 Pages
Twelve Bandsaw Manual70 Pages
- Cutting system
- Metal cut-off machine
- CNC cutting center
- Turning center
- Laser cutting machine
- Automatic cut-off machine
- Metal sawing line
- CNC turning machine
- Automatic sawing line
- Circular sawing machine
- Fiber laser cutting machine
- 2-axis turning machine
- Band sawing line
- Saw blade
- Feeder
- Sanding machine
- Precision cut-off machine
- Wood sawing line
- Horizontal saw
- Dust collector