-Member of Sumitomo DriveTechnologtes BRUSHLESS SERVO MOTORS ATEX - ZONE 2 AND 22
Open the catalog to page 1Brushless Servo Motors in compliance with Explosive Atmospheres Directive (ATEX) 2014/34/EU of the European Parliament and the Council of 23 March 1994 on the approximation of the laws of the Member States, concerning equipment and protective system intended for use in potentially explosive atmospheres and also in compliance with Standard EN IEC 600790:2018, EN IEC 60079-7:2015/A1:2018, EN IEC 60079-31:2014 and IEC 60034-1:2017. The motors are suitable for “normal” working mode with protection level “increased” in ATEX category 3G for Gas and 3D for Dust. TARGET APPLICATION – Zone 2 and 22 Explosive...
Open the catalog to page 2Type Stall torque * Motor performances with winding overtemperature 105°C, motor coupled to metal plate, resolver feedback. In case of different transducer's rating temperature, the motor performances could change. Electrical Power Additional* rotor inertia Opening (release) time Closing (fall in) time * Additional values are related to motor data when the brake is mounted on the motor of the respective size. These values differ from the brake data in unmounted condition. The brakes are intended to be used only as a parking device.
Open the catalog to page 3Type Stall torque * Motor performances with winding overtemperature 105°C, motor coupled to metal plate, resolver feedback. In case of different transducer's rating temperature, the motor performances could change. BRAKE DATA * Additional values are related to motor data when the brake is mounted on the motor of the respective size. These values differ from the brake data in unmounted condition. The brakes are intended to be used only as a parking device.
Open the catalog to page 4ATEX SERVO MOTORS SERIES Type Square Torque Centring Bolt circle Bolt hole Shaft flange diameter diameter diameter diameter x lenght ATEX ULTRA COMPACT SERVO MOTORS SERIES Type Square flange Torque [Nm] Centring diameter 0 - CD [mm] Bolt circle diameter 0 - BC [mm] Bolt hole diameter 0 - BH [mm] Shaft diameter x lenght 0 - SD x SL [mm]
Open the catalog to page 5Lafert S.p.A. J. F. Kennedy, 43 30027 San Donà di Piave (Venezia), Italy Tel. +39 / 0421 229 611 [email protected] www.lafert.com Branches & Partners Lafert GmbH Wolf-Hirth-Straße 10 71034 Böblingen Germany Phone +49 175 550 4526 [email protected] Lafert Electric Motors Ltd. Unit 17 Orion Way Crewe, Cheshire CW1 6NG United Kingdom Phone +44 / (0) 1270 270 022 [email protected] Lafert Moteurs S.A.S. L’Isle d’Abeau Parc de Chesnes 75, rue de Malacombe 38070 St. Quentin-Fallavier France Phone +33 / 474 95 41 01 [email protected] Lafert Motores Electricos, S.L.U. Polígono Pignatelli, Nave...
Open the catalog to page 66 Pages
6 Pages
8 Pages
8 Pages
8 Pages