LUMAT 920 M Presence control The luminescence sensor LUMAT 920 M is ideal for recognising optically brightened materials, i.e. ones which have been enhanced with luminiphores. It recognises labels, markings, leaflets and all luminescent objects. Decisive advantages with the use of the LUMAT 920 M are as follows: • the compact design • its high selective sensivity • a long service life-cycle (100.000 hours) • all functions set and monitored on the sensor head itself • robust die-cast casing IP 67 • wide application range • single spot design for precise measurement The device, operated in conjunction with a control unit such as the ARGUS or a PLC, offers an effective security system in pharmaceutical packaging control. The special feature of the LUMAT 920 M is, that it works on the principle of the transformation of UV light into visible light. The LUMAT uses this effect to – for example, recognise labels on containers of the same colour. The high frequency light source also allows the sensor to be used to recognise "invisible" markings on fast-mo

Technical data Dimesiones scanning distance 10 mm 20 mm 35 mm 50 mm Light source Wavelength Service life (typically) Supply voltage Residual ripple Power consumption Output signal Output current Response time Output switching frequency Timed output Analog output Operation temperature Storage temperature Degree of protection Weight 1. Mounting hole M5/5.5 mm deep 2. Operating indicator (green) 3. Output indicator (yellow) 4. Time delay control 5. Sensitivity control 6. Plug type M12 x 1, 4-wire (adjustable) 7. Lens (light emitting) 8. Light position E3C€ Information may be subject to modification...