IN-LINE SAMPLE PREPARATION AND Al A Hach Company Brand Sample Prep with Automated in-line Sample Preparation and Analysis Modules Sample preparation can significantly decrease laboratory productivity. Even when the analysis is rapid, distilling, digesting or extracting a sample prior to analysis is extremely In response to this problem, Lachat offers a suite of automated in-line sample preparation and analysis modules for Total and WAD cyanide, Total Nitrogen, Total Phosphorus, Total Volatile Phenolics, Sulfide and MBAS Surfactants. These modules can be added to the QuikChem® 8000 or 8500 Flow Injection Analyzers. In-line sample preparation provides the following benefits: • Automates distillations, digestions and solvent extractions • Significantly improves productivity • Reduces consumption of sample preparation reagents • Reduces exposure to corrosive and toxic reagents with closed preparation system • Increases accuracy and precision with controlled system • Provides simple operation—just place the sample in the automatic sampler and start the run Both samples and standards are treated identically with automated preparation and colorimetrie analysis. Preparation and analysis of drinking, waste, and ground water samples can be achieved with greater speed than traditional techniques (90 seconds to 5 minutes per sample), with accurate low level analysis. For specific ranges, method compliance, and speed of analysis, please request the method documents.

MPLE PREPARATION AND ANALYSIS "Subject to change without notice. Parameter Specifications Total Nitrogen Total Phosphorus Total Recoverable Phenolics MBAS Surfactant Chloroform Extraction Total Sulfide Waters (Total) Waters (Total) (Total, pyridine free) Brackish Waters Brackish Waters Brackish Waters For Technical Assistance, Price Information and Ordering Contact the LACHAT office or distributor serving you. A Hach Company Brand World Headquarters ®Hach Company 2007. All rights reserved.