 Description: The premium low temperature BOD incubators of the ZXSP-series from LABWIT are designed to meet a variety of advanced experimental needs, ranging from BOD determination to incubation of micro-organism cultures, preservation of samples, Drosophila incubation and determination of enzymatic activities. All these applications require precise and constant temperature control. Each model has a wide temperature range from 10 ° to 65 ° and can be operated at a single user C C defined temperature, but can also be programmed with up to 9 different temperature segments within a time frame. (18 steps). The (cooling) compressor runs continuously and the control are done through a solenoid valve for more precise temperature control if lower than ambient temperatures are required. Both the interior and exterior are made of robust materials for lifetime operations. The inner chamber is made of high quality #304 stainless steel sheets, with 4 round coved corners. All exposed edges are de-burred to insure no sharp edges. The exterior is cold rolled steel finished with powder coated polyurethane finish, which is resistant to most chemicals and easily cleaned with mild household detergents.  Features:  P.I.D. microprocessor ensures the precision of temperature control under both fixed value mode and program mode.  4.3’’ TFT touch screen panel displays all parameters, easy operation and readout for all control modes.  Three-dimensional heating system ensures fast response, and high uniformity of ±1.0° C@37° C.  Air tight outer door design ensures optimized insulation, achieving best temperature controlling performance under low temperature setpoint.  Sound cooling system with CFC free refrigerant and automatic defrosting system ensure long term operation at low temperature setpoint without frosting issue.  Real-time electronic timer from 0 to 9999 minutes.  Non-volatile memory retains pre-set parameters in case of power interruption.  Triple safety protections for samples, incubator and environment.  All electrical components are fully accessible after removing the top-cover  Independent device for over temperature, high current flow and electric leakage.  Standard configurations; forced air circulation, a fluorescent lamp, 50 mm test port and 2 grids , built-in printer.  Optional UV Lamp, RS-232 interface available. LABWIT Scientific Pty Ltd. Address: 4/38A Thames St, Box Hill North, 3129, VIC Web: www.LABWIT.com E-mail: [email protected] Tel: 03 9897 4415 Mob: 0403 838 963 Jul, 2016.

Door Type Single door with high-density insulation Inner dimensions (WxDxH) Exterior dimensions (WxDxH) Packing dimensions (WxDxH) Net/Gross Weight (kg) Power (W) Electricity ZXSP-R0160,160L, Low Temperature BOD Incubator, -10-65℃ ZXSP-R0270,270L, Low Temperature BOD Incubator, -10-65℃ ZXSP-R0430,430L, Low Temperature BOD Incubator, -10-65℃ Grid Plate for ZXSP-R0160, S/S Grid Plate for ZXSP-R0270, S/S Grid Plate for ZXSP-R0430, S/S ※ S/S: Stainless Steel Control Panel Shelf Rack LABWIT Scientific Pty Ltd. Address: 4/38A Thames St, Box Hill North, 3129, VIC Web: www.LABWIT.com E-mail: [email protected]...