Catalogs >
Labwit Scientific >
Premium Cooled BOD Incubators

Premium Cooled BOD Incubators
2Pages

Catalog excerpts

Descriptions: The premium BOD incubators of the ZXSD-R series from LABWIT are designed to meet a variety of advanced experimental needs, ranging from BOD determination to incubation of micro-organism cultures, preservation of samples, Drosophila incubation and determination of enzymatic activities, to any applications that need incubations at close to ambient temperature or lower. It features a 4.3'' TFT touch screen panel, which ensures clear indication as well as easy operations. Each of the four models has a wide temperature range from ambient -18 °C (minimum 4°C) to 65 °C and can be operated at a single user defined temperature, but can also be programmed with up to 9 different temperature segments within a time frame (18 steps). The (cooling) compressor runs continuously and the control is done through a solenoid valve for more precise temperature control if lower than ambient temperatures are required. • P.I.D. microprocessor ensures the precision of temperature control under both fixed value mode and programmable mode. • 4.3'' TFT touch screen panel displays all parameters, easy operation and readout for all control modes. • Three-dimensional airflow system ensures fast response, and high uniformity of ±1.0°C@37°C. • Sound cooling system with CFC free refrigerant, ozone layer friendly. • Automatic defrosting: only minimal ice formation and very low heat discharge into working area occurs the unit can continue operating when defrosting • Real-time electronic timer from 0 to 9999 minutes. • Non-volatile memory retains pre-set parameters in case of power interruption. • Triple safety protections for samples, incubator and environment. • Independent device for over temperature, high current flow and electric leakage. • Standard configurations; a double layer tempered glass observe window in outer door, an inner glass door, forced air circulation, a fluorescent lamp, 50 mm test port and 2 grids, built-in printer. • Optional UV Lamp, RS-232 interface available.

Open the catalog to page 1

Labwit quality assurance program demands the continuous assessment and improvement of all Labwit products. Information in this leaflet could thus change without notification and does not constitute a product specification. Please contact Labwit or their representatives if you require more details LABWIT Scientific Pty Ltd T :+61 403 838 963 W:www.labwit.com.au E: info@labwit.com.au ABN: 99155 819 980 All Rights Reserved.

Open the catalog to page 2