Descriptions: The premium BOD incubators of the ZXSD-R series from LABWIT are designed to meet a variety of advanced experimental needs, ranging from BOD determination to incubation of micro-organism cultures, preservation of samples, Drosophila incubation and determination of enzymatic activities, to any applications that need incubations at close to ambient temperature or lower. It features a 4.3" TFT touch screen panel, which ensures clear indication as well as easy operations. Each of the four models has a wide temperature range from ambient -18 °C (minimum 4°C) to 65 °C and can be operated at a single user defined temperature, but can also be programmed with up to 9 different temperature segments within a time frame (18 steps). The (cooling) compressor runs continuously and the control is done through a solenoid valve for more precise temperature control if lower than ambient temperatures are required. Features: • P.I.D. microprocessor ensures the precision of temperature control under both fixed value mode and programmable mode. • 4.3" TFT touch screen panel displays all parameters, easy operation and readout for all control modes. • Three-dimensional airflow system ensures fast response, and high uniformity of ±1.0°C@37°C. • Sound cooling system with CFC free refrigerant, ozone layer friendly. • Automatic defrosting: only minimal ice formation and very low heat discharge into working area occurs the unit can continue operating when defrosting • «ew3 steps adjustable fan speed, offering more precisely controlled environment of incubations, without concerns of media or samples drying out. • Real-time electronic timer from 0 to 9999 minutes. • Non-volatile memory retains pre-set parameters in case of power interruption. • Triple safety protections for samples, incubator and environment. • Independent device for over temperature, high current flow and electric leakage. • Standard configurations; a double layer tempered glass observe window in outer door, an inner glass door, forced air circulation, a fluorescent lamp, 50 mm test port and 2 grids, built-in printer. • Optional UV Lamp, RS-232, RS-485 interface available.

Labwit quality assurance program demands the continuous assessment and improvement of all Lab wit products. Information in this leaflet could thus change without notification and does not constitute a product specification. Please contact Labwit or their representatives if you require more details LABWIT Scientific Pty Ltd T :+61 403 838 963 W:www.lab wit, com.au E: info(a)labwit.com.au ABN: 99 155 819 980 All Rights Reserved.