Descriptions: The LABWIT forced air drying ovens are engineered for your daily work, from routing simple glassware drying sterilization applications up to 200°C or 300°C, to the complex, controlled heating applications, for example, aging, bonding, curing, heat treat annealing, stress relieving, burn-in, hardening test purposes. LABWIT provide ovens with two optional heating modes, ZXRD-series back heating, and ZXFD-series bottom heating. Both of them are designed to provide accurate temperature uniformity, with minimized temperature overshoot. For all 200°C models, the ovens are equipped with LCD control panel and can be programmed to run up to 9 different programs with 18 steps of temperatures and time segments. Features: • Forced-air convection and three dimensional heating systems ensure air circulation and heat distribution. • Options of back or bottom heating models, up to 200°C and 300°C • PID Microprocessor controller with 9 segments and 18 steps, only on 200°C models. • Large LCD display on 200°C models, and LED display on 300°C models. • Argon-filled multiple glazed tempered safety glass window, 2 glazing for 200°C models and 3 glazing for 300°C models, optimizes sample monitoring as well as minimize heat losses. • Electro-polished stainless steel inner chambers and round corners for easy cleaning and better air circulation. • Safe protections: over-temperature limit protection, separate over-current fuses, trip switching protection over electric leakage • Non-volatile memory retains pre-set parameters in case of power interruption. • Standard wheel casters available on all models of 210L and above in volume. • Adjustable electro polished stainless steel shelving provides air flow around samples for uniformed tempering and allow for easy cleaning. • 2 grids included as standard.

Convenient Working Environment ■/ Complete stainless steel inner chamber ■/ Low heat dissipation due to 50mm high density insulation ■/ 2 shelves included as standard. Adjustable Air Vent ■/ Adjustable air vent for discharge of humidity evaporation. ■/ Adjusting knob located on side wall for easy access. ■/ Air vent located on the back wall.

Labwit quality assurance program demands the continuous assessment and improvement of all Lab wit products. Information in this leaflet could thus change without notification and does not constitute a product specification. Please contact Labwit or their representatives if you require more details LABWIT Scientific Pty Ltd T :+61 403 838 963 W:www.lab wit, com.au E: info(a)labwit.com.au ABN: 99 155 819 980 All Rights Reserved.