Descriptions: ZXDP-series direct heating incubators offer an economical incubation method to a variety of micro-organism cultures. As a standard feature, all incubators have a high-tech microprocessor controller that maintains accurate temperature control (PID) of the chamber in the range of ambient +5°C to 65°C. With an accuracy of ±0.1°C, a user-friendly sealed control panel allows easy digital setting and fast readout of time and temperature as well as an alarm signal if there is a deviation from set point parameters. The processor of our incubators can store up to 9 programs-18 steps-into a nonvolatile memory. Programs can be used for running multiple "ramp and soak" cycles up to 99 times. Of course the incubators can also be used as a constant (one) temperature incubator. Features: • P.I.D. microprocessor ensures the precision of temperature control under both fixed value mode and program mode. • Fully programmable through the keyboard (9 programs/18 steps). • Forced-air circulation provides uniformity of ±0.5°C@37°C. • Audible and visible alarm on over temperature. • Password protection against unauthorized access to all settings. • Non-volatile memory retains preset parameters after an accidental power interruption. • Large LCD display for easy parameters setting and fast readout. • Inner glass door provides complete visibility to the chamber. • Standard 2 grids included

Labwit quality assurance program demands the continuous assessment and improvement of all Lab wit products. Information in this leaflet could thus change without notification and does not constitute a product specification. Please contact Labwit or their representatives if you require more details