vibration test systems EV210HG60M
22Pages

Electro-dynamic Vibration Test System Model: EV210HG60M Labtone Test Equipment Co., Ltd. Undertaker: Jessica Wang Mobile: +86 188 1909 7469 Http//:www.labtonetech.com E-mail:jessica@labtone.cn

Technical Specification Product Application Type Selection Formula Principle Block Diagram of Equipment Equipment Composition Technical Parameters Introduction to Equipment Performance Introduction to digital vibration controller Equipment Pictures LABTONE Product Portfilio

Technical Specification I. Product Application Vibration test is a process of exciting or shocking some part or device to observe its reaction in real environment. Vibration test is widely applied in many fields, ranging from circuit board, airplane, ship, rocket, missile, automobile, household appliance and other industrial products. Labtone can offer you the whole vibration and testing proposal, and provide you with the quality certificates of products according to national and international standards, including GB, GJB, UL, JIS, DIN, ISO, BS, MIL, IEC and ASTM standards. Type Selection...

Technical Specification Principle Block Diagram of Equipment Installation diagram of vibration tester

Technical Specification Equipment Configuration Vibration Shaker A11S24 shaker ((including Pneumatic Centering Controller) VT60CM Head expander HG60M Horizontal Slip Table (Included electric steering system) Cooling Unit Part B402S blower (including silencer and Duct ) 3 Power Amplifier LA10K Power amplifier (including Field power supply) Vibration Controller (integrated instrument cabinet) Vcs5X-2 controller (Including Hardware and Control Functions Program software CDS) Accelerometers (Including Length 7m low noise BNC-M5 cable) ACER Computer（Including keyboard, mouse and monitor）...

Technical Specification Technical Parameters Parameters of A11S24 electromagnetic vibration generator Peak Sine (Pk) Usable Frequency Vertical Load Support Body Suspension Natural Frequency (Thrust Axis) Armature Diameter Armature Weight Allowable partial force Fundamental Resonance Frequency (Bare table) Load Attachment Points (Standard) 16 stainless steel M10 Inserts Stray Flux Density Allowable partial force Shaker dimensions Power Amplifier Specifications Rated Output Capacity Frequency Range Signal to Noise Ratio Amplifier Efficiency Harmonic Distortion Input Signal Range Amplifier...

Technical Specification 300MHz DSP Processing Ethernet or USB Port Connecting to PC -20~60℃ Working Temperature Fanless Structure to Reduce the Background Noise 160 dB / Octave Anti-aliasing Filter 24-bit ADC/DAC, Less than 120dB Dynamic Range 102.4 kHz Sampling Rate, 40kHz Frequency Range Floating Ground Design Reduces Ground Control Functions ●Base Random ●Swept Sine ●Classic Shock ● ACER PC Windows10 OS and an Ethernet port.and 5 Usb2.0 port Microsoft Word / Excel and PDF are recommended.(options) Control accelerometers ●Mode: Lab-24110 High sensitivity Charge accel ,10M, PVC M5 coaxial...

Technical Specification Compressed Air Requirement

Technical Specification Introduction to Equipment Performance Vibration shaker A11S24 The Shaker is the heart of the system. It provides the vibrating armature to which the items to be tested is attached. The principal parts of the shaker are shown in the Figure D-2. The field coils energize the Shaker body with flux paths as shown, creating a high magnetic flux density in the annular air gap. The field coils are connected to the DC field supply from amplifier. The armature assembly, consisting of the table and drive coil, is suspended in the annular air gap of the shaker. When an...

Technical Specification Excitation coil It is of double magnetic circuit structure with low flux leakage and uniform magnetic field. Table surface Advanced phosphating and automotive paint technologies are applied for the surface to resist wear and rusting for long time. Table cooling Intake air structure with low noise blower and improved table is applied, the excitation coil is of cellular duct, middle magnetic loop is of double-layer split duct, so new duct design is applied to enhance cooling effect. digital switch power amplifier The LA series power amplifier adopts conventional Pulse...

Technical Specification rectifiers (one for power modules and one for the field), heat sinks, capacitors, connectors and cooling fans. The RM provides 210VDC (V + to V-) for the power module and 270VDC (G1, G2) for the field coil, all of which float to the ground. In a vibrating system, the field power is separated from the amplifier. If the blower is powered by a power amplifier, there is a connection interface for the three-phase power to enter the blower motor. If the blower is powered by an additional motor starter box (MS), an additional three-phase power supply is required. If the...

Technical Specification Servo protection system It has complete protection functions, including grid overvoltage, under-voltage, phase loss, logic fault, power module conduction through, over-temperature, over-current output, overvoltage output, power supply drive, table over-displacement, table temperature, external interlocking, etc. Vertical extending platform The extending platform is usually used as a large installation platform of specimens which can be square, round or defined by users. In order to reduce dynamic impact on the extending platform, all extending platforms must be...

Technical Specification sends the interlock signal to the amplifier and the amplifier switched off the output when over travel occurs. Horizontal oil film slip table The horizontal slip table is designed to have high tilting moment and lateral restriction. This design concept is combined with standard horizontal slip table to enable high dynamic moment limit and keep guide oil film damping feature. The horizontal slip table is composed of a slipper, a connector, a natural granite slab, horizontal slip table base and an independent oil source. Slip Table is ideally suited for sequential...

Technical Specification 1. Motor work instruction 2. Shaker Rotation Controller Controller (SRC) switch ON/OFF 3. Rotate reverse selection (vertical and horizontal) 4. Rotate start: After the rotation is started, when the “Start” is held for more than 3 seconds, the Shaker Rotation controller (SRC) will switch to the automatic rotation mode, and the shaker will rotate until the “Stop” is pressed. The other is the manual mode. Press "Start" and the Shaker Rotation controller (SRC) will turn a little! The automatic mode will fail at a position close to horizontal or vertical. In the shaker to...