Catalogs >
Labthink Instruments Co., Ltd. >
XLW (G6) Auto Tensile Tester

XLW (G6) Auto Tensile Tester
3Pages

Catalog excerpts

PARAM® XLW (G6) Auto Tensile Tester Professional Technology Better than 0.5% of full scale effectively ensures accurate test results Multiple testing modes are available, including tensile strength, deformation, peeling and tearing, etc. Stress at defined elongation, elastic modulus and stress and strain etc. could be analyzed 1200 mm extra-long stroke satisfies the test needs of various materials with extreme deformation rate 6 working stations and pneumatic specimen clamping facilitate to test multiple specimens simultaneously Different test range of load cells and 6 distinct test speeds to meet different test requirements The instrument is controlled by computer, with PVC operation panel and membrane switch which is convenient for instrument operation Intelligent designs of over-travel protection, overload protect, automatic position reset and intelligent error alerts for safe test operation Professional operating software supports statistical analysis of group specimens, superposition analysis of test curves, maximum, minimum, average and standard deviation of test results Supports zoom-in and zoom-out of test curve and vernier indication of test results Supports Lystem™ Lab Data Sharing System for uniform and systematic management of test results and test reports Applications This instrument is equipped with more than 100 grips for tests of more than 1000 materials. And customization is also available for special material tests. Examples of instrument applications: Basic Applications Extended ApplicationsAdditional Accessories Required Opening Resistance Tensile Test Test of Combined Covers Tear Test of ZD -Type Caps Opening Resistance Test of Oral Liquid Tear Test of Adhesive Binding Books Test of Bottle Caps Infusion Bags 90 Degree Peel Test Adhesive Strength 90 Degree Peel Test Opening Resistance Test (hard) Test of Jelly Cups Tear Resistance Adhesive Strength Pullout Test of Tooth Peel Test of Flexible Test (soft) Brush Hair Tube Caps Heatseal Strength Cosmetic Brush Hair Rubber Closures Protection Films Strength and Elongation Rate Removal Force of Pipes and Pipe Joints Labthink Instruments Co., Ltd.144 Wuyingshan Road, Jinan, P.R.China (250031) Phone: +86 -531-85068566 FAX: +86-531-85812140 w w w.labthinkinter n atio n al.co m.cn

Open the catalog to page 1

Test Principle The pre-conditioned specimen is mounted between two grips, which move in relative direction during the test. The changes of force and displacement are separately recorded by the load cell fixed on the driven grip and embedded displacement transducer. The tensile strength, tear strength and elongation rate can be obtained by further calculation. This instrument conforms to multiple standards as following: ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, JIS P8113, QB/T 2358, Technical Specifications Load Cell Capacity 500 N, 50 N (one of them is...

Open the catalog to page 2

Please Note: Labthink is always dedicated to the innovation and improvement of product performance and function. Therefore, technical specifications are subject to change without further notice. Please visit our website at www.labthinkinternational.com.cn for the latest updates. Labthink reserves the rights of final interpretation and revision. Labthink Instruments Co., Ltd.144 Wuyingshan Road, Jinan, P.R.China (250031) Phone: +86 -531-85068566 FAX: +86-531-85812140 w w w.labthinkinter n atio n al.co m.cn

Open the catalog to page 3