*mydirectindustry

Catalogs
Labthink Instruments Co., Ltd.
Water Barrier Property Test Methods for Rubber Materials

Water Barrier Property Test Methods for Rubber Materials

Product catalog summary

Introduction
Rubber materials are valued for their elasticity and sealing capabilities, but their effectiveness is heavily dependent on their water barrier properties. This report explores various test methods used to evaluate these properties, focusing on both water vapor and liquid water permeation resistance.

Test Methods Overview
There is no single standardized test method specifically for rubber's water barrier properties. Instead, methods from other materials, such as plastics, are adapted. Key methods include:

Desiccant Method (GB/T 1037): Measures water vapor permeation through a rubber sample using a desiccant to capture vapor. The Water Vapor Transmission Rate (WVTR) is calculated from weight changes. Challenges include achieving a good seal and maintaining constant humidity.
ASTM E96 (Desiccant and Water Methods): Offers two approaches: the desiccant method and the water method, which uses liquid water to create a high humidity environment. Results vary between methods, and selection depends on the specific application environment.
Hydrostatic Pressure Method (ISO 1420): Assesses liquid water barrier properties by determining the sample's ability to withstand water leakage under pressure.

Labthink C360H System
The Labthink C360H Water Vapor Transmission Rate Test System is designed based on the gravimetric determination method, conforming to ASTM E96 standards. It measures the water vapor transmission rate of materials with high moisture barrier properties, applicable to various industries including food, pharmaceuticals, and consumer goods.

Importance of Testing
Testing water barrier properties ensures rubber materials meet specifications for sealing applications. By comparing WVTR or hydrostatic pressure results, manufacturers can select suitable materials for specific moisture-sensitive applications. These tests are crucial for quality control, material selection, and product performance improvement.

Conclusion
While no single standardized test exists for rubber, adapting methods from other materials provides valuable insights. The choice of test method depends on the intended use and type of water barrier property being evaluated. As demand for functional packaging grows, testing methods continue to evolve, and collaboration with industry partners is encouraged for enhanced quality control.

Catalog excerpts

Water Barrier Property Test Methods for Rubber Materials-1

Labthink Instruments Co., Ltd. [email protected] +86-531-85068566 Water Barrier Property Test Methods for Rubber Materials Rubber's elasticity and ability to recover from deformation make it ideal for sealing and protecting various products. However, its water barrier property, which refers to its resistance to water vapor and liquid water permeation, is crucial for its effectiveness. This report examines the test methods used to evaluate this property. There's no single standardized test method specifically designed for water barrier property of rubber materials. Consequently, relevant methods from other materials, such as plastics, are adapted. Desiccant method (GB/T 1037) measures the amount of water vapor permeating through a rubber sample under specific temperature, humidity, and pressure differentials. A desiccant is used to capture the permeated vapor, and the weight change is measured to calculate the Water Vapor Transmission Rate (WVTR). While relatively simple, achieving a good seal with wax and maintaining a constant high humidity can be challenging. 1

Open the catalog to page 1

Water Barrier Property Test Methods for Rubber Materials-2

Labthink Instruments Co., Ltd. [email protected] +86-531-85068566 The ASTM E96 (Desiccant and Water Methods) standard offers two methods: desiccant and water method. The water method uses liquid water on one side of the sample to create a high humidity environment. The WVTR is calculated based on the weight change of the test dish. Notably, the two methods yield different results and should be chosen based on the application's specific environment. Labthink C360H Water Vapor Transmission Rate Test System, is designed and manufactured based on the gravimetric determination method and conforms...

Open the catalog to page 2

Water Barrier Property Test Methods for Rubber Materials-3

Labthink Instruments Co., Ltd. [email protected] +86-531-85068566 Hydrostatic Pressure method (ISO 1420) focuses on liquid water barrier property. It utilizes a pressurized container to assess the sample's ability to withstand water leakage under pressure. The test determines if the material leaks or the maximum pressure it can endure before leakage. Water barrier property testing helps ensure rubber materials meet the required specifications for sealing applications. By comparing the WVTR or hydrostatic pressure results of different rubber types, manufacturers can select the most suitable material...

Open the catalog to page 3

All Labthink Instruments Co., Ltd. catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list