Catalogs >
Labthink Instruments Co., Ltd. >
Vertical Tensile Testing Machine

Vertical Tensile Testing Machine
2Pages

Catalog excerpts

www.labthink.cn/en Contact: (Ms) Yarina Gao Email: trade5@labthink.cn Tel: 86-531-85060139 XLW Tensile Testing Machine Labthink XLW Tensile Testing Machine is a universal testing machine for materials. It can be used for tensile test, tension rate and elongation rate test, tensile strength at break, 90°& 180°peel strength test, tear strength test, heat seal strength test for various materials. Pre-conditioned specimen is mounted between two grips, which move in relative direction during the test. The signals of force and displacement changes are separately recorded by the load cell fixed on the driven grip and embedded displacement transducer. The tensile strength, tear strength and elongation rate can be obtained by further calculation. Labthink XLW Tensile Testing Machine has the following Features 7 test modes including seal strength, peel strength, tear strength and other force of flexible materials. 1% of reading value Different ranges of load cells 7 distinct test speeds Controlled by a micro-computer with menu interface, PVC operation panel and large LCD display Over-travel protection, overload protection, automatic position reset and power failure memory for safe test operation Professional software

Open the catalog to page 1

www.labthink.cn/en Contact: (Ms) Yarina Gao Email: trade5@labthink.cn Tel: 86-531-85060139 Technical Specifications Specifications CHY-CA Load Capacity 100N, 200N, 500N (one of them is available) Accuracy 1% of reading value Test Speeds 50, 100, 150, 200, 250, 300, 500 mm/min Specimen Width 30 mm (Standard Jig); 50 mm (Optional Jig) Sample Clamp Manual Stroke 600mm Instrument Size 450mm(L) x 450mm(W) x 980mm(H) Power Supply AC 220V 50Hz Net Weight 65kg Standards ISO 37--Rubber, vulcanized or thermoplastic-Determination of tensile stress-strain properties ASTM E4--Standard Practices for...

Open the catalog to page 2