Group: Labthink
Catalog excerpts
C403H Oxygen/Water Vapor Transmission Rate Test System C403H Oxygen /Water Vapor Transmission Rate Test System is based on the testing principle of Coulometric oxygen sensor and infrared water vapor sensor. It is designed and manufactured according to ASTM D3985、 ASTM F1249,ISO 15106-2 and other relevant standards to provide high precision and high efficiency oxygen and water vapor transmission rate tests for high and medium gas barrier materials. It is suitable for testing the oxygen and water vapor transmission performance of films, sheets and related materials in the fields of food, medicine, medical devices, daily chemicals, photovoltaic, electronic and many others. Product Featuresnote1 OTR/WVTR tested in One Instrument OTR \ WVTR mode, OTR mode and WVTR mode are available for selection. OTR and WVTR tests can be automatically completed for each sample mounting. Genuinely reflect the OTR \ WVTR performance of the same sample, avoiding effect on test data due to sample contamination arising from instrument switching. Coulometric Oxygen Sensor ⚫ ⚫ ⚫ ⚫ The instrument is equipped with a ppb level Coulometric Oxygen Sensor, as one of new Labthink technical achievements, which can obtain a lower limit of the test. Designed according to ASTM D3985 with absolute value, and no calibration is permitted. Longer service life, two times longer than that of a traditional Coulometric oxygen sensor. Over limit alarm and automatic protection. Infrared Moisture Sensor ⚫ ⚫ ⚫ ⚫ The instrument is equipped with Labthink patented infrared moisture sensor which can obtain a lower limit of the test. Designed according to ASTM F1249. Longer service life, non-consumable. Over limit alarm and automatic protection. Using 360 °air circulation constant temperature technology, the temperature stability is better. Equipped with high-precision temperature and humidity sensor, to monitor and record temperature and hu
Open the catalog to page 1In the test process, the automatic control on flow, temperature and relative humidity is realized, reaching higher accuracy. Higher test repeatability of 0.01 cc / (m2·day) can be achieved. High Efficiency Three-cell ⚫ Independent three sets of 50cm2 standard area test cells, in line with parallel sample detection required by standards. Three samples can be tested at the same time under the same conditions, with independent tests data. In the same test cycle, the number of samples completed increases from 2 to 3. Automatic sample clamping, saving time and effort, ensuring consistent...
Open the catalog to page 2relative humidity flows on one side of the film, and the high purity nitrogen flows on the other side; oxygen or water molecules diffuse through the film into high-purity nitrogen on the other side, and are carried to the sensor by the flowing nitrogen. By analyzing the oxygen or water vapor concentration measured by the sensor, the oxygen or water vapor transmission rate can be calculated. Reference Standards ASTM D3985, ASTM F1307, GB/T 19789, GB/T 31354, DIN 53380-3, JIS K7126-2-B, YBB 000820032015 ASTM F1249, ISO 15106-2, GB/T 26253, JIS K7129, YBB00092003-2015 Test Applications The...
Open the catalog to page 3Repeatability Temperature range Temperature %RH (Within standard temperature DataShieldTM Data Shield Note 3 GMP Computer System Requirements Table 2: Technical Specifications Test Cell Sample Size Sample Thickness Standard Test Area 99.999% high purity nitrogen, 99.5% oxygen (gas source is out of supply scope) Interface Size Dimensions Power Supply Table 3: Product Configuration Standard Configuration Options Remarks Mainframe, tablet, sampler, vacuum grease, polyurethane pipe of 6 mm in diameter GP-01 Gas Purification Unit, air compressor, CFR21Part11, GMP computer system requirements...
Open the catalog to page 4Note 3: DataShieldTM Data Shield System provides safe and reliable data application support. The system can be shared by multiple Labthink products. Please purchase separately as needed.
Open the catalog to page 5All Labthink Instruments Co. catalogs and technical brochures
-
C630H Heat Seal Tester
3 Pages
-
C610M Auto Tensile Tester
3 Pages
-
Heat seal testing instrument
3 Pages
-
Paper Board Thickness Tester
4 Pages
-
Film Thickness Meter
4 Pages
-
C632B Hot Tack Tester
3 Pages
-
C632M Hot tack Tester
3 Pages
-
Tensile Testing Device
3 Pages
-
Peel Force Tester
3 Pages
-
C630H Heat Seal Tester
3 Pages
-
"ELEMENDORF" test device
2 Pages
-
C680M Tearing Tester
2 Pages
-
C650H Headspace Gas Analyzer
2 Pages
-
Box Compression Tester
2 Pages
-
Peel Force Tester
3 Pages
-
Pull Off Adhesion Tester
3 Pages
-
Torque Measuring Devices
3 Pages
-
Bottle Torque Tester
3 Pages
-
Packaging Burst Tester
3 Pages
-
PARAM C640 Thickness Tester
4 Pages
-
Torque Strength Measuring
3 Pages
-
Bottle Leak Tester Machine
3 Pages
-
Oxygen Transmission Tester
4 Pages
-
C612M Digital Torque Tester
3 Pages
-
Bag COF Tester
3 Pages
-
Labthink Headspace Analyzer
2 Pages
-
Sandwich Bag COF Tester
2 Pages
-
Textile Thickness Gauge
4 Pages
-
C680M Tearing Tester
2 Pages
-
C632B Hot Tack Tester
3 Pages
-
Labthink Headspace Analyzer
2 Pages
-
Heat Shrink Tester
2 Pages
-
Tensile Testing Device
3 Pages
-
MAP Packaging Burst Tester
3 Pages
-
MAP Packaging Leak Tester
3 Pages
-
Lug Cap Torque Tester
3 Pages
-
Motorized Pull Test Machine
3 Pages
-
CHY-C2A Thickness Tester
2 Pages
-
Heat Seal Tester
3 Pages
-
Roll Tack Tester
1 Pages
-
Spot Thickness Measurement
4 Pages
-
Adhesive Tack Tester
2 Pages
-
Vacuum Bag Leak Tester
3 Pages
-
Micron Film Thickness Gauge
4 Pages
-
Spot thickness measurement
4 Pages
-
Automatic Tube Leak Tester
2 Pages
-
Burst Test Equipment
3 Pages
-
Elongation Tester
3 Pages
-
Box Compression Test Machine
2 Pages
-
Adhesion Tester for Sticker
2 Pages
-
Ink Rub Lab Equipment
2 Pages
-
Friction Testing Machine
3 Pages
-
Fabric Thickness Measurement
4 Pages
-
Snack Bag Leak Detector
3 Pages
-
Carton Stacking Test Machine
2 Pages
-
Sheet Metal Thickness Gauge
4 Pages
-
Residual oxygen level tester
2 Pages
-
Vacuum Tube Leak Tester
3 Pages
-
leak detector for packaging
3 Pages
-
bottle torque tester machine
3 Pages
-
micrometer per ASTM D374
4 Pages
-
rub tester for wine labels
2 Pages
-
LAB THICNESS TESTER
3 Pages
-
Peel tester for 180 Degree
5 Pages
-
Ball tack tester
5 Pages
-
table top thickness gauge
12 Pages
-
Tabletop sealing machine
14 Pages
-
Film Friction Tester
2 Pages
-
Head space Oxygen Analyser
2 Pages
-
90 degree peel test Device
3 Pages
-
C681M Flex Durability Tester
2 Pages
-
C650M Headspace Gas Analyzer
2 Pages
-
C650B Headspace Gas Analyzer
2 Pages
-
C632B Hot Tack Tester
3 Pages
-
C630H Heat Seal Tester
3 Pages
-
C620H Friction
3 Pages
-
C611M Box Compression Tester
2 Pages
-
C611B Box Compression Tester
2 Pages
-
C610M Auto Tensile Tester
3 Pages
-
C610H Auto Tensile Tester
3 Pages
-
Handheld Headspace Analyzer
2 Pages
-
Cap Torque Machine
5 Pages
-
Oxygen Permeation Analyser
3 Pages
-
Oxygen Permeation Apparatus
3 Pages
-
Papier Abrieb-Testmaschine
1 Pages
-
Bottle Cap Leak Tester
4 Pages
-
torque meter for PET Bottles
3 Pages
-
box compression device
5 Pages
-
BLJ-02 Disk Stripping Tester
2 Pages
-
RT-01 Rub Tester
2 Pages
-
MCJ-01A Rub Tester
2 Pages
-
Floor Slip Resistance Tester
5 Pages
-
Leak Tester
3 Pages
-
Consultative Testing Service
4 Pages
-
BOPP Tape Shear Tester
3 Pages
-
Bell Jar leak tester
2 Pages
-
COF testing of Polymer Films
2 Pages
-
labthink MFY-01 Leak Tester
3 Pages
-
Heat Sealing Property Tester
1 Pages
-
Tablet Leak Test Apparatus
5 Pages
-
Precise Tape Peeling Tester
5 Pages
-
BOPP Film Thickness Meter
2 Pages
-
Package Headspace Analyzer
5 Pages
-
electrical torque meter
5 Pages
-
tape peeling tester
5 Pages
-
tensile testing instrument
5 Pages
-
gas leakage detector LSSD-01
5 Pages
-
XLW (G6) Auto Tensile Tester
3 Pages
-
XLW (M) Auto Tensile Tester
3 Pages
-
XLW (B) Auto Tensile Tester
2 Pages
-
XLW Auto Tensile Tester
3 Pages
-
CHY-C2 Thickness Tester
2 Pages
-
CHY-CA Thickness Tester
2 Pages
-
XLW (PC) Auto Tensile Tester
3 Pages
-
Plastic Film Thickness Test
2 Pages
-
Tensile Strength Machine
5 Pages
-
fogging testing machine
5 Pages
-
heat sealing testing machine
5 Pages
-
shrinkage testing machine
5 Pages
-
torque testing machine
5 Pages
-
Medical Package leak Tester
5 Pages
-
Food Package leak Tester
5 Pages
-
ink rubbing test machine
5 Pages
-
rolling ball tack tester
5 Pages
-
Glebo flex tester
5 Pages
-
hot tack tester
5 Pages
-
tape peel force tester
5 Pages
-
Rolling Ball Tester
5 Pages
-
permeability apparatus
5 Pages
-
CHY-CB Thickness Tester
2 Pages
-
Heat Shrinkage Force Tester
5 Pages
-
XLW (EC) Auto Tensile Tester
3 Pages
-
gas leakage detector MFY-01
5 Pages
-
materials Flex tester
5 Pages
-
oxygen headspace analyzer
5 Pages
-
cap torque testing machine
5 Pages
-
Lasting Ahesion Tester
5 Pages
-
Peeling strength tester
5 Pages
-
Torque Measurement Equipment
2 Pages
-
Heat Sealing Test machine
1 Pages
-
FDI-01
5 Pages
-
Leakage Detector
5 Pages
-
Rolling Ball Adhesion Tester
1 Pages
-
film thickness gauge
5 Pages
-
rub testing machine
5 Pages
-
air leakage tester
5 Pages
-
vacuum leak detector
4 Pages
-
plastic film testing machine
3 Pages
-
carton compression test
5 Pages
-
plastic cap torque tester
5 Pages
-
manual torque tester
1 Pages
-
opening torque tester
2 Pages
-
Oxygen headspace Analyzer
2 Pages
-
Permeability Test System
2 Pages
-
DIN 75201
2 Pages
-
Tensile strength test bench
5 Pages
-
impact testing equipments
2 Pages
-
thickness gauge
5 Pages
-
vacuum leak testing machine
2 Pages
-
paper thickness measurement
5 Pages
-
FDT-02 Gelbo Flex Tester
5 Pages
-
Friction Coefficient Tester
5 Pages
-
Drop Ball Impact Tester
5 Pages
-
Dealers wanted
1 Pages
-
Abrasion Resistance Tester
2 Pages
-
HST-H3 Heat Sealing Machine
1 Pages
-
FPT-F1 Friction/ Peel Tester
2 Pages
-
FT-F1 Fogging Tester
2 Pages
-
Material Testing Equipment
2 Pages
-
Packaging Testing
2 Pages
-
Abrasion Test
2 Pages
-
Torque Meter
2 Pages
-
pendulum impact tester
2 Pages
-
Oxygen Transmission Analyzer
2 Pages
-
Friction Tester
2 Pages
-
Leak Detector
2 Pages
-
Analyzer for MAP
2 Pages
-
Adhesive Strength Tester
1 Pages
-
O2 & CO2 Analyzer
1 Pages
-
Gas Permeability Tester
2 Pages
-
Heat Thermal Shrink Tester
1 Pages
-
Paper Air Resistance Tester
1 Pages
-
Lasting Adhesive Tester
2 Pages
-
Cap Torque Tester
3 Pages
-
Lasting Adhesion Tester
2 Pages
-
Gradient Heat Seal Tester
4 Pages
-
Head space gas Analysis
4 Pages
-
Headspace Gas Analyser
3 Pages
-
Headspace Gas Analyzer
3 Pages
-
Material Tensile Tester
5 Pages
-
Ink Rub Tester
2 Pages
-
medical packaging tester
3 Pages
-
Hot Tack Tester (Data Sheet)
2 Pages
-
Heat Sealing tester
2 Pages
-
Evaporation Residue Tester
3 Pages
-
Blister Package testing
3 Pages
-
Gas Permeability Analyzer
3 Pages
-
Tensile Testing Machine
2 Pages
-
package integrity tester
2 Pages
-
Oxygen permeation Analyzer
2 Pages
-
Drop Impact Tester
2 Pages
-
Torque tester
2 Pages
-
Compression Testing Machine
2 Pages
-
Material Testing Machine
3 Pages
-
Shrink Film testing
2 Pages
-
fogging tester
2 Pages
-
Impact tester
2 Pages
-
Quality Concerns of Doypacks
2 Pages
-
Material Testing
2 Pages
-
laboratory heat sealer
2 Pages
-
Automated Heat Sealer
1 Pages
-
analog thickness gauge
1 Pages
-
Residual Gas Analyzer
1 Pages
-
digital torque gauge
1 Pages
-
packaging Industry
2 Pages
-
Metrology and Test Equipment
2 Pages
-
Tensile Tester
2 Pages
-
material moisture monitor
2 Pages
-
Gas Analyzer
2 Pages
-
Headspace Gas Analyzer
1 Pages
-
FRICTION/PEEL TESTER
1 Pages
-
HOLDING TACK TESTER
1 Pages
-
ROLLING BALL TESTER
1 Pages
-
BOX COMPRESSION TESTER
1 Pages
-
INK RUB TESTER
1 Pages
-
FOGGING TESTER
2 Pages
-
Film Shrinkage Tester
1 Pages
-
Film Pendulum Impact Tester
1 Pages
-
FALLING DART IMPACT TESTER
1 Pages
-
THICKNESS TESTER
1 Pages
-
TOQUE TESTER
1 Pages
-
Tearing Tester
1 Pages
-
Gas Permeability Tester
1 Pages
-
Oxygen Permeability Tester
2 Pages
Archived catalogs
-
Leak Tester
2 Pages