Catalogs >
Labthink Instruments Co., Ltd. >
Testing Instrument for the Safety and Performance of Non-Metal Cars Interior Materials

Testing Instrument for the Safety and Performance of Non-Metal Cars Interior Materials
3Pages

Catalog excerpts

Testing Instrument for the Safety and Performance of Non-Metal Cars Interior Materials - 1

PARAM® FT-F1 Fogging Tester FT-F1 is professionally designed for the fogging characteristics evaluation of volatile constituents of decorating materials used in cars and aircrafts, e.g. plastic articles, polyurethane, textiles, leather, adhesives, nonwovens and thermal forming elastomers at high temperature conditions. Furthermore it could be used for the fogging phenomenon test of high intensity discharge (HID) headlamps of cars. Professional Technology    Wide range and high precision of temperature control device to support the combinations of non-standard test conditions 6 test stations can perform specimen test or blank test simultaneously This instrument ensures accurate and reliable test data through stable running condition Test Principle The preconditioned specimen is heated and evaporates in the beaker; the volatile constituents condense on the glass plate or aluminum foil treated in cooling chamber. Take off the glass plate or aluminum foil when the condensation process is finished. The fogging characteristics could be obtained by measuring condensed constituent weight and fogging value on the glass plate or aluminum foil and comparing with the data before condensation process. This instrument conforms to the multiple international and national standards: ISO 6452, DIN 75201, SAE J1756, QB/T 2728, BS EN 14288, PV 3920, PV 3015, ES-X 83231, NES M0161, D45 1727, GM 9305P, TSM 0503G Three Test Methods Gloss Method: The specimen is heated in the beaker and its volatile constituents are condensed on the cooling glass plate. The fogging value could be obtained by calculating and comparing the gloss values occurred before and after condensation process. Haze Method: The specimen is heated in the beaker and its volatile constituents are condensed on the cooling glass plate. The fogging value of the specimen could be obtained by calculating and comparing the fogging values occurred before and after condensation process. Weighing Method: The specimen is heated in the beaker and its volatile constituents are condensed on the cooling aluminum foil. The fogging value-the weight of condensed constituents could be obtained by analyzing the weight changes of aluminum foil occurred before and after condensation process. Instrument Struc

Open the catalog to page 1

Testing Instrument for the Safety and Performance of Non-Metal Cars Interior Materials - 2

The instrument mainly consists of constant high-temperature bath, constant low-temperature bath, cooling plate, beaker, glass plate, meter, sample cutter and other accessories, through which it can perform the processes of sampling, heating, condensation and test. Operation Process Prepare specimens-----switch on high and low temperature baths-----clean beakers and glass plates------place specimens----place glass plate or aluminum foil-----place cooling chamber-----perform test for a specified period of time----take off glass plate or aluminum foil and place certain time----measure the...

Open the catalog to page 2

Testing Instrument for the Safety and Performance of Non-Metal Cars Interior Materials - 3

High-Temperature Bath Net Weight of 15 kg (except the weight of heat conducting medium) Low-Temperature Bath Power Supply Configurations Instrument, Constant Temperature Control Device, Gloss Meter, Sample Clamp Ring, Beaker, Fluorine Rubber O-ring, Rubber Fixing Ring, Rectangular Glass Plate, Round Glass Plate, Aluminum Foil, Round Sample Cutter of Aluminum Foil, Lid, Stand of Glass Plate, Round Sample Cutter and Accessory Stand Haze Meter, Analytical Balance (0.01 mg), Beaker, Fluorine Rubber O-ring, Rectangular Glass Optional Parts Plate, Round Glass Plate, Aluminum Foil, Round Sample...

Open the catalog to page 3