Tensile Testing of Polymers and Composites Materials

Product catalog summary

Introduction
Labthink Instruments Co., Ltd is a company specializing in advanced testing technology. The document provides details about the XLW(EC) Tensile Testing Machine, a newly designed tensile tester that is the most advanced model among Labthink's offerings.

Specifications
The XLW(EC) Tensile Testing Machine is equipped with a precise sensor offering better than 0.5% accuracy. It has a load cell capacity of 500 N as standard, with an optional 50 N capacity. The test speed can be adjusted between 50 to 500 mm/min for both forward and backward directions. The machine can test one specimen at a time, with a standard specimen width of 30 mm and an optional width of 50 mm. It uses a pneumatic specimen clamp and requires an external air supply with a pressure of 0.5 MPa to 0.7 MPa. The stroke length is 950 mm, and the instrument dimensions are 450 mm x 450 mm x 1410 mm. It operates on an AC 220V 50Hz power supply and weighs 70 kg.

Capabilities
The machine can perform tensile and compression tests and is compatible with over 100 grips, allowing it to test more than 1000 materials. Customization options are available to suit specific testing needs.

Standards Compliance
The XLW(EC) Tensile Testing Machine conforms to several international standards, including ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, and JIS P8113.

Catalog excerpts

Tensile Testing of Polymers and Composites Materials-1

The Ultimate Testing Technology Labthink Instruments Co., Ltd The Ultimate Testing Technology Yarina Gao Marketing Department Tel: 86-531-85060139 Fax: 86-531-85062108 Email: [email protected] Labthink Instruments Co., Ltd 144 Wuyingshan Road, Jinan, China www.labthinkinternational.com.cn

Open the catalog to page 1

Tensile Testing of Polymers and Composites Materials-2

The Ultimate Testing Technology XLW(EC) Tensile Testing Machine is one newly designed tensile tester in Labthink. This Tensile Tester is most advanced model among Labthink Tensile testing Machines. It is equipment the precise sensor, which can have better than 0.5% accuracy. Beside, Tensile strength, It can also be used for compression test. Figure 1 With more than 100 grips, Labthink tensile testers can test more than 1000 materials. Customization is available.

Open the catalog to page 2

Tensile Testing of Polymers and Composites Materials-3

The Ultimate Testing Technology Technical Specifications Specifications Load Cell Accuracy Test Speed Number of Specimens Specimen Width 1 30 mm (Standard Grip) 50 mm (Optional Grip) Pneumatic Specimen Clamp Air(outside of supply scope) Gas Supply Pressure Stroke Instrument Dimension Power Supply Standards Labthink Tensile Testers conform to ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, JIS P8113

Open the catalog to page 3