Plastic films hot tack and heat seal performance tester
3Pages

{{requestButtons}}

Catalog excerpts

Plastic films hot tack and heat seal performance tester - 1

C632M Hot Tack Tester C632M Hot Tack Tester is applicable in hot tack and heat seal performance tests for plastic films, laminated films and other packaging materials. Product FeaturesNote1 Constant Pressure & Automated Sample Feeding  Automatic pressure control technology manages the pressure fluctuation within 0.005MPa The test pressure can be set through the program without manual adjustment Automatic sample feeding technology to ensure the accuracy of test time Upper and lower sealing jaws with metal surfaces can obtain more authentic thermal tack performance Digital P.I.D temperature control technology enables the tester to reach the set temperature quickly, effectively avoids temperature fluctuations Safety Design & Automatic Sample Clamping  The overall protective cover is designed to prevent hand pinching, scalding and collision, making sure the operation is safer Preload fixtures are convenient for sample clamping. Pneumatic sample clamping saves time and effort, with consistent clamping force and better sealing efficiency. Observation window for clear monitoring of the test process Intelligent Control & Reliable Performance  The 7 Inch industrial level Touch panel control for easier operation. Sensor static design, reducing force fluctuation AC servo system, more stable high-speed operation Global sourced core components ensure low failure rate and long service life The self-detection function warns of over heat and over limit. Support display of multiple units in MPa and PSI. Functions of automatic data saving, power failure automatic memory to prevent data loss. Multi-level user authority m

Open the catalog to page 1
Plastic films hot tack and heat seal performance tester - 2

Micro-printer and universal USB data interface for convenient data output and transmission(optional). DataShieldTM Data Management System enables centralized data management and convenient information system connection (optional) Applications Note1 Basic applications Plastic films, sheets and composite films e.g. PE, PP, PET and composite films used in packages for instant noodle, milk powder, washing powder, food and drugs Extended applications Hot seal test of flexible plastic film and composite film. Technical Specifications Technical Parameters Note2 Parameters/Model Load Cell Capacity...

Open the catalog to page 2
Plastic films hot tack and heat seal performance tester - 3

Table:2 Technical Specifications Sealing Jaw Fixture width Sample width Fixtures distance Port size Table 3: Product configuration Standard configuration Mainframe, pneumatic fixtures, sampler, pedal switch, 6 mm tubing Software, air compressor, DataShieldTM Data Management System Note3 The inlet of the air compressor uses 6 mm tubing(101.5PSI / 0.7 MPa), the air source is out of supply scope. Note 1: All the product features are subject to detailed descriptions in the “Technical Parameters”. Note 2: The parameters in the table are measured by professional operators in Labthink Laboratory...

Open the catalog to page 3

All Labthink Instruments Co. catalogs and technical brochures

  1. DIN 75201

    2 Pages

  2. Torque Meter

    2 Pages

  3. Gas Analyzer

    2 Pages

  4. TOQUE TESTER

    1 Pages

Archived catalogs

  1. Leak Tester

    2 Pages