Catalogs >
Labthink Instruments Co., Ltd. >
PET and PE Layer Thickness for Enhanced Oxygen Barrier Efficiency

PET and PE Layer Thickness for Enhanced Oxygen Barrier Efficiency
3Pages

Catalog excerpts

PET and PE Layer Thickness for Enhanced Oxygen Barrier Efficiency - 1

PERME® VAC-V2 Gas Permeability Tester VAC-V2 is based on the differential pressure method, and is professionally applicable to the determination of gas transmission rate as well as solubility coefficient, diffusion coefficient and permeability coefficient of plastic films, composite films, high barrier materials, sheeting, and aluminum foils. Professional Technology ⚫ Gas transmission rate, solubility coefficient, diffusion coefficient and permeability coefficient of the specimen could be obtained at one operation 3 distinct or equivalent specimens could be tested individually with independent test results at one operation Wide range and high precision temperature and humidity control to meet various test conditions The instrument comes with two test modes: proportional mode and standard mode Test range could be extended based on user requirements to test the materials with high permeability Test results could be easily obtained even at extreme conditions by data fitting function, which could fit any temperature The instrument could be used to test poisonous, inflammable, and explosive gases (customization required) The instrument is controlled by a computer and test process is automatic Reference film for fast calibration to ensure accurate and universal test data Standard RS232 port for convenient data transfer Support Lystem™ Lab Data Sharing System for uniform management of test results and test reports Test Principle The pre-conditioned specimen is mounted in the gas diffusion cell as to form a sealed barrier between two chambers. The lower-pressure chamber is firstly evacuated, followed by the evacuation of the entire cell. A flow of gas is thereafter introduced into the evacuated higher-pressure chamber and a constant pressure difference is generated between two chambers. The gas permeates through the specimen from the higher pressure side into the lower side. The gas permeability and other barrier properties of the specimen can be obtained by monitoring the pressure changes in the lower chamber. This test instrument conforms to the following standards: ISO 15105-1, ISO 2556, GB/T 1038-2000, ASTM D1434, JIS K7126-1, YBB 00082003 Applications This test instrument is applicable to the determination of gas permeability of: Basic Applications Including plastic films, plastic composite films, paper-plastic composite films, geomembranes, coextruded fi

Open the catalog to page 1

PET and PE Layer Thickness for Enhanced Oxygen Barrier Efficiency - 2

aluminum foil, aluminum foil composite films, and many others Including engineering plastics, rubber, and building materials, e.g. PP, PVC, and PVDC Various Gases Inflammable, Explosive Gases Biodegradable Films Materials for Aerospace Usage Extended Applications Paper and Paper Board Test the permeability of various types of gases, e.g. O 2, CO2, N2, Air and Helium Test the permeability of various films to inflammable, explosive gases Test gas permeability of various sorts of biodegradable films, e.g. starch-based biodegradable bags This instrument can test the Helium permeability of...

Open the catalog to page 2

PET and PE Layer Thickness for Enhanced Oxygen Barrier Efficiency - 3

Port Size Instrument Size Configurations Standard Configurations Optional Parts Note Instrument, Constant Temperature Control Device, Professional Software, Round Sample Cutter, Vacuum Grease, Fast Quantitative Filter Paper and Vacuum Pump (Imported) Blades for Sample Cutter, Vacuum Grease, Vacuum Pump Oil, Fast Quantitative Filter Paper 1. The gas supply port of the instrument is Φ6 mm PU Tubing; 2. Customers will need to prepare for gas supply.

Open the catalog to page 3