1. Catalogs
  2. Labthink Instruments Co., Ltd.
  3. MEGA 1500 Auto Tensile Tester

MEGA 1500 Auto Tensile Tester
1 /3Pages

MEGA 1500 Auto Tensile Tester

MEGA 1500 Auto Tensile Tester
1 /3Pages

Catalog excerpts

MEGA 1500 Auto Tensile Tester-1

PARAM® MEGA 1500 Auto Tensile Tester MEGA 1500 Auto Tensile Tester is professionally designed for the determination of tensile strength, peel strength, tear strength, heat seal strength and adhesiveness of plastic films, composite films, flexible packaging materials, adhesives, adhesive tapes, pressure sensitive tapes, medical patches, protective films, release paper, rubber and paper, etc. Professional Technology             Double-column ball screw driving mechanism ensures high precision and steady working of the instrument Multiple testing modes are available including tensile strength, deformation, peeling and tearing, etc. which can meet the testing demands of the customers Stress at defined elongation, elastic modulus and stress and strain etc. can be analyzed 1200mm extra-long stroke satisfies the test needs of various materials with extreme deformation rate 6 working stations and pneumatic specimen clamping facilitate to test multiple specimens simultaneously Load cells with different test ranges and stepless speed change from 1 to 500mm/min can meet the requirements for various testing conditions The embedded computer controller system, with membrane switch is convenient for instrument operation Multi-level over-travel protection, overload protect, automatic position reset and intelligent error alerts for safe test operation Embedded computer controlled system effectively guarantees the system security and the reliability of data management as well as test operation The instrument can be operated with one monitor, one mouse and one keyboard, not requiring a computer The system is equipped with four USB ports and two net connection interfaces, which is convenient to data expansion Professional operating software supports superposition analysis of test curves of group specimens and statistical analysis of maximum, minimum, average and standard deviation of test results Test Principle The pre-conditioned specimen is mounted between two grips, which move in relative direction during the test. The changes of force and displacement are separately recorded by the load cell fixed on the moveable sample grips and embedded displacement transducer. The tensile strength, tear strength and elongation rate can be obtained by further calculation. Test Standard This test instrument conforms to th

 Open the catalog to page 1
MEGA 1500 Auto Tensile Tester-2

ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, GB 8808, GB/T 1040.12006, GB/T 1040.2-2006, GB/T 1040.3-2006, GB/T 1040.4-2006, GB/T 1040.5-2008, GB/T 4850-2002, GB/T 12914-2008, GB/T 17200, GB/T 16578.1-2008, GB/T 7122, GB/T 2790, GB/T 2791, GB/T 2792, GB/T 17590, JIS P8113, QB/T 2358, QB/T 1130 Applications This instrument is equipped with more than 100 grips for tests of more than 1000 materials. And customization is also available for special material tests. Examples of instrument applications: Basic Application Extended Application (Additional Accessories Required)...

 Open the catalog to page 2
MEGA 1500 Auto Tensile Tester-3

Labthink Gas Supply Pressure Port Size Instrument Dimension Power Supply Net Weight 0.6MPa~0.7MPa (Outside of Supply Scope) <I>6mm PU Tubing 850 mm (L) x 700 mm (W) x 2030 mm (H) AC 120V 60Hz / AC 220V 50Hz 168 kg Instrument, Professional Software, Pedal Switch, LCD Monitor. Keyboard, Standard Configurations Mouse, Pneumatic Clamping System, Wireless Data Interface, Wireless Data Module, Micro-printer. Standard Sample Grip (25mm) Optional Parts Sample Cutter SetNolc, High Gain Antenna, Installing Support 1. The gas supply port of the instrument is <I>6 mm PU tubing; Note 2. Customers will...

 Open the catalog to page 3

All Labthink Instruments Co., Ltd. catalogs and technical brochures

  1. C610M

    3  Pages

  2. C690H

    4  Pages

  3. C130H

    4  Pages

  4. COF-P01

    2  Pages

  5. VAC-V2

    3  Pages

  6. C230H (2025)

    4  Pages

  7. C610H

    3  Pages

  8. C206H

    4  Pages

  9. C406H

    5  Pages

  10. C403H

    5  Pages

  11. C 681M

    1  Page

  12. C660B (2025)

    3  Pages

  13. C632M

    3  Pages

  14. C630H

    3  Pages

  15. C620H

    3  Pages

  16. C 640

    4  Pages

  17. C 660M

    3  Pages

  18. C306H (2025)

    4  Pages

  19. C203H

    4  Pages

  20. BTY-B3P

    2  Pages

  21. C360M

    4  Pages

  22. C632B

    3  Pages

  23. C190H

    3  Pages

  24. C390H

    4  Pages

  25. C360H

    4  Pages

  26. C660M

    3  Pages

  27. C303H

    4  Pages

  28. C106H

    5  Pages

  29. C640

    4  Pages

  30. MXD-02

    2  Pages

  31. CHY-C2A

    2  Pages

  32. C611B

    2  Pages

  33. CH130

    4  Pages

  34. C 631 H

    2  Pages

  35. C660 B

    3  Pages

  36. VAC-VBS

    3  Pages

  37. XYD-15K

    2  Pages

  38. C360

    4  Pages

  39. C631 H

    2  Pages

  40. FST-02

    2  Pages

  41. C681 M

    2  Pages

  42. C230

    4  Pages

  43. C631H

    2  Pages

  44. C612M

    3  Pages

  45. SLY-SI

    2  Pages

  46. C360 M

    4  Pages

  47. C611M

    2  Pages

  48. C330H

    4  Pages

  49. Leak Tester

    3  Pages

  50. Tensile Testers

    19  Pages

  51. FDI-01

    5  Pages

  52. DIN 75201

    2  Pages

  53. Abrasion Test

    2  Pages

  54. Torque Meter

    2  Pages

  55. Leak Detector

    2  Pages

  56. Torque tester

    2  Pages

  57. Impact tester

    2  Pages

  58. Gas Analyzer

    2  Pages

  59. TOQUE TESTER

    1  Page

Archived catalogs

  1. C611M

    2  Pages

  2. C306H

    3  Pages

  3. C230H

    4  Pages

  4. Leak Tester

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.