video corpo

Labthink rub tester to test abrasion resistance for printing materials
3Pages

{{requestButtons}}

Catalog excerpts

Labthink rub tester to test abrasion resistance for printing materials - 1

Labthink Instruments Co., Ltd Professional Manufacturer of Packaging Testing Equipment Friction tester Rub Tester is professionally designed for abrasion resistance of surface coating layers of printed materials, e.g. ink layer or photosensitive (PS) coating. This instrument could effectively analyze the problems of poor abrasion resistance, ink layer falling off, lower printable force and poor hardness of coating layers of printed materials. This Rub Tester is applicable to the determination of abrasion resistance of: Paper Printing MaterialsPhotosensitive Coating Layers ·Linear Reciprocating Movement ·Standard embedded rub panel ensures the even rub area and rub process is completely quiet ·Dual stations with arc movement structure can test equivalent or distinct specimens simultaneously ·1 ~ 2Specimens, 4 test modes of dry rub, wet rub, wet transfer, and wet smear and 4 different test speeds to meet different test requirements

Open the catalog to page 1
Labthink rub tester to test abrasion resistance for printing materials - 2

BLJ-01 Disk Stripping Tester Disk Stripping Tester is professionally used to test ink fastness of plastic films and glass paper decorating printed materials that utilize the intaglio printing technique. It could also be used to test adhesion condition of surface layers formed by the techniques of vacuum coating, surface coating and lamination. Principle The standard glass adhesive tape should be bonded together with ink printing surface, which is pretreated according to test conditions, by adhesive tape roller under specified load, rolling speed and rolling times. After a certain contacting...

Open the catalog to page 2
Labthink rub tester to test abrasion resistance for printing materials - 3

YGJ-02 Adhesive Tape Roller YGJ-02 is professionally designed for the determination of ink fastness of plastic films and glass paper decorating printed materials that utilize the intaglio printing technique. It could be used to test adhesion condition of surface layers formed by the techniques of vacuum coating, surface coating and lamination. Principle The standard glass adhesive tape should be bonded together with ink printing surface, which is pretreated according to test conditions, by adhesive tape roller under specified load, rolling speed and rolling times. After a certain contacting...

Open the catalog to page 3

All Labthink Instruments Co. catalogs and technical brochures

  1. DIN 75201

    2 Pages

  2. Torque Meter

    2 Pages

  3. Gas Analyzer

    2 Pages

  4. TOQUE TESTER

    1 Pages

Archived catalogs

  1. Leak Tester

    2 Pages