video corpo

Labthink Hot Tack Tester to measure Hot seal strength of PE Films and Laminates
2Pages

{{requestButtons}}

Catalog excerpts

Labthink Hot Tack Tester to measure Hot seal strength of PE Films and Laminates - 1

LABTHINK HTT-L1 HOT TACK TESTER In the heat sealing process, contents are dropped into the bag immediately after the horizontal seal bars have opened. The strength of heat seals formed between thermoplastic surfaces of flexible webs, immediately after the seal has been made and before it cools to room temperature is what we called Hot Tack. Since the content can be heavy, the hot seal must be able to withstand high loads, thus requiring a high hot tack force. This measurement will be of influence while upgrading packaging materials or packing production processes. Labthink Hot Tack tester is right used to evaluate product seal strengths by performing hot tacking testing according to ASTM F1921 (method B). Hot tack Test Heat Seal Test Seal Strength Test Tensile Test Standards ASTM F1921, ASTM F2029 Digital P.I.D temperature control Controlled by micro computer, digital display and PVC operation panel 4 force testing ranges and 6 testing speeds Manual and Pedal Starting mode RS232 4 force testing ranges and 6 testing speeds Contact: Yarina Gao Email: trade5@labthink.cn Phone:086-531-85060139

Open the catalog to page 1
Labthink Hot Tack Tester to measure Hot seal strength of PE Films and Laminates - 2

Technical Specifications Specifications Sealing Temperature Temperature Accuracy Sealing Pressure Dwell time Delay time Testing speeds Travel Stroke Contact: Yarina Gao Email: trade5@labthink.cn Phone:086-531-85060139

Open the catalog to page 2

All Labthink Instruments Co. catalogs and technical brochures

  1. DIN 75201

    2 Pages

  2. Torque Meter

    2 Pages

  3. Gas Analyzer

    2 Pages

  4. TOQUE TESTER

    1 Pages

Archived catalogs

  1. Leak Tester

    2 Pages