*mydirectindustry

Catalogs
Labthink Instruments Co., Ltd.
i-Meditek 1300 Medical Packaging Tester---Pullout Force Test of Protection Cap

i-Meditek 1300 Medical Packaging Tester---Pullout Force Test of Protection Cap

Product catalog summary

Scope
The i-Meditek 1300 Medical Packaging Tester is a versatile device designed to evaluate various mechanical properties of medical and packaging materials. It can measure the puncture force of medical rubber closures, pullout force of rubber closures, break force of ampoules, sliding resistance of syringes, and several other parameters related to medical appliances and packaging materials. Additionally, it tests tensile strength, peeling force, heat seal strength, and other mechanical properties of materials such as plastic films, composite materials, and adhesives.

Test Procedures

Preparation: Prepare test specimens according to specific standards. Adjust the sample grips and mount the specimen, which includes the protection cap and syringe, to the upper and lower sample grips.
Test Setup: Select the "Pullout Force Test of Protection Cap" mode to create a new test. Set up the test and specimen parameters, ensuring the test speed is set to 100 mm/min.
Execution: Start the test by clicking the "Test" button. The upper grip will rise, and test curves will be displayed in real-time. Once the protection cap is pulled out, the upper grip stops and returns automatically. Record the test results and view the test curves.
Repetition and Result Generation: Repeat the procedures until the required number of specimen tests is completed. After all tests are finished, click "Generate Result" to compile the data.

Catalog excerpts

i-Meditek 1300 Medical Packaging Tester---Pullout Force Test of Protection Cap-1

i-Meditek 1300 Medical Packaging Tester---Pullout Force Test of Protection Cap Scope i-Meditek 1300 Medical Packaging Tester is designed to determine the puncture force of medical rubber closure, pullout force of rubber closure, break force of ampoule, sliding resistance of syringe, puncture force of syringe needle, connection force of syringe needle and needle hub, connection force of syringe needle hub and shield, seal performance of plastic blood bag, and the performance of other medical appliances. As well, i-Meditek 1300 could test the tensile strength, peeling force, heat seal strength, deformation, tearing force, adhesive performance, piercing force, opening force, low speed unwrapping force and pullout force etc. of plastic films, composite materials, flexible packaging materials, plastic soft tube, adhesives, adhesive tapes, protective films, combination caps, aluminum foils, diaphragms, back sheets, non-woven fabrics, rubber, release paper and other products. Test Procedures A: Prepare test specimens according to specific standards. Adjust the sample grips and mount the specimen (protection cap and syringe) to the upper and lower sample grips.

Open the catalog to page 1

i-Meditek 1300 Medical Packaging Tester---Pullout Force Test of Protection Cap-2

200 River's Edge Drive, Medford, MA 02155 Curve Type Force-Displacement Reverse Selection Refresh Curve Curve Analysis Generate Result Compare Results | Print Report Save to Ex< el

Open the catalog to page 2

All Labthink Instruments Co., Ltd. catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list