*mydirectindustry

Catalogs
Labthink Instruments Co., Ltd.
i-MEDITEK 1300-Connection Force Test between Hypodermic Needle and Needle Hub

i-MEDITEK 1300-Connection Force Test between Hypodermic Needle and Needle Hub

Product catalog summary

Scope
The i-Meditek 1300 Medical Packaging Tester is a versatile device designed to evaluate various forces and performance metrics related to medical and packaging materials. It can measure puncture force, pullout force, break force, sliding resistance, and connection force for medical devices such as syringes and needles. Additionally, it assesses tensile strength, peeling force, heat seal strength, and other mechanical properties of materials like plastic films, adhesives, and non-woven fabrics.

Test Procedures

Preparation: Prepare test specimens according to specific standards. Adjust the sample grips and securely fix the needle hub on the device.
Test Setup: Select the "Connection Force Test between Hypodermic Syringe Needle and Needle Hub" mode. Set up the necessary test and specimen parameters.
Execution: Initiate the test by clicking the "Test" button. The device will display test data and curves in real-time. Upon completion of a test, the sample grips will return to their original position, and results will be calculated automatically.
Result Generation: If additional tests are required, mount the next specimen and repeat the process. Once all tests are completed, click "Generate Result" to compile the data.

Catalog excerpts

i-MEDITEK 1300-Connection Force Test between Hypodermic Needle and Needle Hub-1

i-Meditek 1300 Medical Packaging Tester ---Connection Force Test between Hypodermic Needle and Needle Hub Scope i-Meditek 1300 Medical Packaging Tester is designed to determine the puncture force of medical rubber closure, pullout force of rubber closure, break force of ampoule, sliding resistance of syringe, puncture force of syringe needle, connection force of syringe needle and needle hub, connection force of syringe needle hub and shield, seal performance of plastic blood bag, and the performance of other medical appliances. As well, i-Meditek 1300 could test the tensile strength, peeling force, heat seal strength, deformation, tearing force, adhesive performance, piercing force, opening force, low speed unwrapping force and pullout force etc. of plastic films, composite materials, flexible packaging materials, plastic soft tube, adhesives, adhesive tapes, protective films, combination caps, aluminum foils, diaphragms, back sheets, non-woven fabrics, rubber, release paper and other products. Test Procedures A: Prepare test specimens according to specific standards. Adjust the sample grips and fix the needle hub on specific device and pull the needle hub without impact.

Open the catalog to page 1

i-MEDITEK 1300-Connection Force Test between Hypodermic Needle and Needle Hub-2

200 River's Edge Drive, Medford, MA 02155 Test Parameter]; [Specimen Parameter] ]| Result | System Info | Configuration Specimen name Specimen provider Syringe Needle OD(mm) i Specimen material Specimen Manu, Inspection Orga, Submit Clear necessary, mount next specimen and click "Test" nished, click "Generate Result" Maximum(k... Minimum(k,,, Mean(kPa) Curve Type Force-Displacement Reverse Selection Refresh Curve Curve Analysis J Generate Result Compare Results Print Report

Open the catalog to page 2

All Labthink Instruments Co., Ltd. catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list