FOGGING TESTER
2Pages

Catalog excerpts

untitled table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:30.00pt "Impact", sans-serif; } .font1 { font:6.00pt "Microsoft Sans Serif", sans-serif; } .font2 { font:8.00pt "Microsoft Sans Serif", sans-serif; } .font3 { font:12.00pt "Microsoft Sans Serif", sans-serif; } PARAM® FT-F1 Fogging Tester Labthink PARAM FT-F1 Fogging Tester is designed to evaluate the evaporation of the high-temperature volatile constituents of the cabin decoration components in automotives and aircrafts, including automotive cabin plastic decoration components, polyurethane, textiles, leather, adhesives, non-woven and thermal forming elastomers and etc., as well as for the fogging test of front high-intensity-discharge (HID) lamp for automotives. Features 6 test chambers, simultaneous specimen test and blank test Stable operation, accurate data High precision temperature control Principle The specimen is heated in the glass beaker and begins to evaporate; the volatile constituents condense on the glass plate or foil that has been cooled by the cooling chamber. After the cooling process, take off the glass plate or the foil. Measure the fogging value or the weight of the condensed constituents on the glass plate or the foil by comparing the data before and after condensation to obtain the volatility of the specimen. 3 Testing Methods Gloss Method: the specimen is heated in the glass beaker and its volatile constituents are condensed on the low temperature glass plate. By calculating and comparing the gloss values before and after condensation, the fogging value of the specimen can be obtained. Fogging Method: the specimen is heated in the glass beaker and its volatile constituents are condensed on the low temperature glass plate. By calculating and comparing the fogging values before and after condensation, the fogging value of the specimen can be obtained. Weighing Method: the specimen is heated in the glass beaker and its volatile constituents are condensed on the low temperature foil. By calculating the changes in the weight of the foil before and after condensation, the weight of the condensed constituents can be obtained. Structure PARAM FT-F1 Fogging Tester consists of constant high-temperature bath, constant low-temperature bath, cooling plate, glass beaker, glass plate, meters, sample cutter and other accessories, and accomplishes processes of sampling, heating, condensation and testing. Operation Demo Prepare samples Switch on constant high-temperature and low-temperature bath Clean the glass beakers and the glass plates Place specimens Place glass plates or aluminum foils Place cooling blocks Run test for a specified period of time --Take the glass plates or aluminum foils down and wait for a specified period of time Measure the gloss value or the fogging value of the glass plates or measure the weight of the aluminum foils Compare data to obtain test results Technical Indexes High-temperature bath range: room temperature~150°C Labthink instruments Co., Ltd. No. 144 Wuyingshan Road, Jinan 250031, China. www.labthink.cn Tel :0086 531-85024157 Fax : 0086 531-85812140

Open the catalog to page 1

untitled table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:6.00pt "Microsoft Sans Serif", sans-serif; } .font1 { font:8.00pt "Microsoft Sans Serif", sans-serif; } (optional: room temperature~280°C) Resolution of high-temperature bath: ±0.1°C (150°C) Low-temperature bath range: 0°C~100°C Resolution of low-temperature bath: ±0.1°C Dimensions of high-temperature bath: 670mm(L) x490mm(B)x 540mm(H) Dimensions of low-temperature bath: 400mm(L)x 220mm(B)x 520mm(H) Net weight of high-temperature bath: 32kg (excl. heat-transfer medium) Netweight of lowtemperature bath:...

Open the catalog to page 2