Catalogs >
Labthink Instruments Co., Ltd. >
Fogging Characteristics Testing Machine for Automotive Interior

Fogging Characteristics Testing Machine for Automotive Interior
3Pages

Catalog excerpts

Fogging Characteristics Testing Machine for Automotive Interior - 1

PARAM® FT-F1 Fogging Tester Yarina Gao trade5@labthink.cn FT-F1 is professionally applicable to the fogging characteristics evaluation of volatile constituents of decorating materials used in cars and aircrafts, e.g. plastic articles, polyurethane, textiles, leather, adhesives, non-woven and thermal forming elastomers at high temperature conditions. It also could be used for the fogging phenomenon test of front high intensity discharge (HID) lamps of cars. Professional Technology Wide range and high precision of temperature control device to support the combinations of non-standard test conditions 6 test stations can perform specimen test or blank test simultaneously This instrument ensures accurate and reliable test data through stable running condition Test Principle The preconditioned specimen is heated and evaporates in the beaker; the volatile constituents condense on the glass plate or aluminum foil treated in cooling chamber. Take off the glass plate or aluminum foil when the condensation process is finished. The fogging characteristics could be obtained by measuring condensed constituent weight and fogging value on the glass plate or aluminum foil and comparing with the data before condensation process. This instrument conforms to the multiple international and national standards: ISO 6452, DIN 75201,SAE J1756, QB/T 2728, BS EN 14288,PV 3920, PV 3015, ES-X83231, NES M0161, D45 1727, GM 9305P, TSM 0503G Three Test Methods Gloss Method: the specimen is heated in the beaker and its volatile constituents are condensed on the cooling glass plate. The fogging value could be obtained by calculating and comparing the gloss values occurred before and after condensation process. Fogging Method:the specimen is heated in the beaker and its volatile constituents are condensed on the cooling glass plate. The fogging value of the specimen could be obtained by calculating and comparing the fogging values occurred before and after condensation process. Weighing Method: the specimen is heated in the beaker and its volatile constituents are condensed on the cooling aluminum foil. The fogging value---the weight of condensed constituents could be obtained by analyzing the weight changes of aluminum foil occurred before and after condensation process. Instrument Structure The instrument mainly consists of constant high-temperature bath, constant low-temperature bath, cooling plate, beaker, glass plate, meter, sample cutter and other accessories, through which it can perform the processes of Labthink Instruments Co., Ltd.144 Wuyingshan Road, Jinan, P.R.China (250031) Phone: +86 -531-85068566 FAX: +86-531-85812140 w w w.labthinkinter n atio n al.co m.cn

Open the catalog to page 1

Fogging Characteristics Testing Machine for Automotive Interior - 2

sampling, heating, condensation and test. Operation Process of time—take off glass plate or aluminum foil and place certain time—measure the gloss value, fogging value of This instrument is applicable to the determination of: Decorating Articles of Cars Test the volatility of car decorating articles, e.g. instrument boards, knobs, seat cushions, floor leather and ceiling materials at high temperature Plastic Particles Test the volatility of plastic particles at high temperature Test the volatility of carpets at high temperature Test the volatility of leather at high temperature Thermal...

Open the catalog to page 2

Fogging Characteristics Testing Machine for Automotive Interior - 3

Low-TemperatureBath Power AC 220V 50Hz Configurations Mainbody, Constant Temperature Control Device, Gloss Meter, Sample Clamp Ring, Beaker, Standard Fluorine Rubber O-ring, Rubber Fixing Ring, Rectangular Glass Plate, Round Glass Plate, Configurations Aluminum Foil, Round Sample Cutter of Aluminum Foil, Lid, Stand of Glass Plate, Round Sample Cutter, Heating Fluid, DOP and Accessory Stand Fogging Meter, Analytical Balance(0.01mg), Beaker, Fluorine Rubber O-ring, Rectangular Optional Parts Glass Plate, Round Glass Plate, Aluminum Foil, Round Sample Cutter of Aluminum Foil, Stand of Glass...

Open the catalog to page 3