*mydirectindustry

Catalogs
Labthink Instruments Co., Ltd.
Equipment for testing adhesion to Steel ASTM-D3330

Equipment for testing adhesion to Steel ASTM-D3330

Product catalog summary

Overview: The document provides a comprehensive guide on the PARAM® XLW(PC) Auto Tensile Tester, detailing its applications, technical specifications, and compliance with various standards. This instrument is designed for testing the force properties of flexible packaging materials with high precision and multiple test ranges.

Applications: The tester is applicable for a wide range of tests including tensile strength, puncture tests, peel tests, tear resistance, and more. It is equipped with numerous sample jigs to accommodate over a thousand materials, with customization options available for special materials.

Technical Specifications: The tester offers a test range of 500N and 50N, with an accuracy better than 0.5% of the reading value. It supports test speeds ranging from 50 to 500 mm/min and can handle specimens with a width of 30 mm (standard jig) or 50 mm (optional jig). The instrument size is 450mm(L)×450mm(W)×1410mm(H) and it weighs 68 kg.

Configurations: The standard configuration includes the main body, universal jigs, professional software, and a communication cable. Optional parts include a standard pressure roller, test plate, sample cutter, and customized jigs.

Features: The tester features seven independent test modes and can perform tests at seven different speeds. It includes intelligent software for data analysis and comparison, over-travel protection, overload protection, automatic position reset, and power failure memory for safe operation. It also supports the Lystem™ Lab Data Sharing System for systematic data management.

Test Principle: The specimen is mounted between two grips that move in relative directions during the test. Force and displacement changes are recorded, allowing for the calculation of tensile strength, tear strength, and elongation rate.

Standards Compliance: The instrument conforms to numerous national and international standards, including ISO 37, GB/T 1040 series, ASTM standards, and others, ensuring its applicability in various testing scenarios.

Catalog excerpts

Equipment for testing adhesion to Steel ASTM-D3330-1

Technical Specifications PARAM XLW(PC) Auto Tensile Tester Test Range Labthink*Think for you only! This instrument is equipped with hundreds of sample jigs for tests of more than one thousand materials, where customization is also available for special materials. Part examples for the instrument applications: Basic Applications PARAM ®XLW(PC) Standard Configurations Mainbody, Universal Jigs, Professional Software, and Communication Cable Optional Parts Standard Pressure Roller, Test Plate, Sample Cutter, and Customized Jigs Labthink Instruments Co., Ltd. Printed September 2012

Open the catalog to page 1

Equipment for testing adhesion to Steel ASTM-D3330-2

Test Principle labthink PARAM XLW(PC) XLW (PC) auto tensile tester is professionally applicable to the determination of force properties of various flexible packaging materials, with high precision (better than 0.5% of reading accuracy) and multiple test ranges. The instrument is designed with 7independent test modes and could perform tests at seven different test speeds to meet various test conditions. Intelligent software facilitates to operate the instrument and provides data analysis and comparison functions. } Better than 0.5% of reading accuracy effectively ensures accurate test results....

Open the catalog to page 2

All Labthink Instruments Co., Ltd. catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list