1. Catalogs
  2. Labthink Instruments Co., Ltd.
  3. Double-column 6 working stations MEGA 1500 Auto Tensile Tester

Double-column 6 working stations MEGA 1500 Auto Tensile Tester

Double-column 6 working stations MEGA 1500 Auto Tensile Tester

Double-column 6 working stations MEGA 1500 Auto Tensile Tester

Product catalog summary
Overview: The MEGA 1500 Auto Tensile Tester is designed for testing the tensile, peel, tear, and heat seal strength of various materials including plastic films, adhesives, and paper. It is equipped with advanced technology to ensure precision and reliability in testing.
Professional Technology:
  • Features a double-column ball screw driving mechanism for high precision.
  • Offers multiple testing modes such as tensile strength, deformation, peeling, and tearing.
  • Capable of analyzing stress at defined elongation, elastic modulus, and strain.
  • Includes a 1200mm extra-long stroke for materials with high deformation rates.
  • Equipped with 6 working stations and pneumatic specimen clamping for simultaneous testing.
  • Load cells with various test ranges and adjustable speed from 1 to 500mm/min.
  • Embedded computer controller system with a membrane switch for easy operation.
  • Safety features include over-travel protection, overload protection, and intelligent error alerts.
  • Operable with a monitor, mouse, and keyboard without needing a computer.
  • Four USB ports and two network interfaces for data expansion.
  • Professional software for test curve analysis and statistical analysis of results.
Test Principle: The specimen is mounted between two grips that move relative to each other during testing. Force and displacement changes are recorded to calculate tensile strength, tear strength, and elongation rate.
Test Standards: Conforms to standards such as ISO 37, ASTM E4, ASTM D882, and others.
Applications: Suitable for over 1000 material tests with more than 100 grips available. Customization is possible for special materials. Applications include tensile tests, peel tests, tear tests, and more.
Technical Specifications:
  • Load Cell Capacity: 500N standard, optional 50N, 100N, 250N, 1000N.
  • Accuracy: 1% FS.
  • Test Speed: 1-500mm/min.
  • Number of Stations: 6.
  • Specimen Width: 25mm standard.
  • Clamping Way: Pneumatic Specimen Clamp.
  • Stroke: 1200mm.
  • Gas Supply Pressure: 0.6MPa~0.7MPa.
  • Instrument Dimension: 850 mm (L) × 700 mm (W) × 2030 mm (H).
  • Power Supply: 220VAC 50Hz / 120VAC 60Hz.
  • Net Weight: 168 kg.
Configurations: Comes with standard configurations including professional software, pneumatic clamping system, and more. Optional parts include a sample cutter set and high gain antenna.
Remarks: The instrument requires a gas supply prepared by the customer. Technical specifications are subject to change, and updates can be found on the Labthink website.
See more

Catalog excerpts

Double-column 6 working stations MEGA 1500 Auto Tensile Tester-1

PARAM® MEGA 1500 Auto Tensile Tester MEGA 1500 Auto Tensile Tester is professionally designed for the determination of tensile strength, peel strength, tear strength, heat seal strength and adhesiveness of plastic films, composite films, flexible packaging materials, adhesives, adhesive tapes, pressure sensitive tapes, medical patches, protective films, release paper, rubber and paper, etc. Professional Technology • Double-column ball screw driving mechanism ensures high precision and steady working of the instrument • Multiple testing modes are available including tensile strength, deformation, peeling and tearing, etc. which can meet the testing demands of the customers • Stress at defined elongation, elastic modulus and stress and strain etc. can be analyzed • 1200mm extra-long stroke satisfies the test needs of various materials with extreme deformation rate • 6 working stations and pneumatic specimen clamping facilitate to test multiple specimens simultaneously • Load cells with different test ranges and stepless speed change from 1 to 500mm/min can meet the requirements for various testing conditions • The embedded computer controller system, with membrane switch is convenient for instrument operation • Multi-level over-travel protection, overload protect, automatic position reset and intelligent error alerts for safe test operation • Embedded computer controlled system effectively guarantees the system security and the reliability of data management as well as test operation • The instrument can be operated with one monitor, one mouse and one keyboard, not requiring a computer • The system is equipped with four USB ports and two net connection interfaces, which is convenient to data expansion • Professional operating software supports superposition analysis of test curves of group specimens and statistical analysis of maximum, minimum, average and standard deviation of test results Test Principle The pre-conditioned specimen is mounted between two grips, which move in relative direction during the test. The changes of force and displacement are separately recorded by the load cell fixed on the moveable sample grips and embedded displacement transducer. The tensile strength, tear strength and elongation rate can be obtained by further calculation. Test Standard This test instrument conforms to the following standards: Labthink Instruments CO., Ltd. 144 Wuyingshan Road, linan, P.R.China (250031) Phone: +86-531-85068566 FAX: +86-531-85062108 Labthink International, Inc. 200 River's Edge Drive, Medford, MA, 02155, U.S.A. Phone:+1-617-830-2190 FAX: +1-781-219-3638 www.labthink.cam

 Open the catalog to page 1
Double-column 6 working stations MEGA 1500 Auto Tensile Tester-2

ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, GB 8808, GB/T 1040.12006, GB/T 1040.2-2006, GB/T 1040.3-2006, GB/T 1040.4-2006, GB/T 1040.5-2008, GB/T 4850-2002, GB/T 12914-2008, GB/T 17200, GB/T 16578.1-2008, GB/T 7122, GB/T 2790, GB/T 2791, GB/T 2792, GB/T 17590, JIS P8113, QB/T 2358, QB/T 1130 Applications This instrument is equipped with more than 100 grips for tests of more than 1000 materials. And customization is also available for special material tests. Examples of instrument applications: Specifications Load Cell Capacity Accuracy Test Speed Number of Stations...

 Open the catalog to page 2
Double-column 6 working stations MEGA 1500 Auto Tensile Tester-3

Clamping Way Stroke Gas Supply Pressure Port Size Instrument Dimension Power Supply Net Weight Pneumatic Specimen Clamp 1200mm 0.6MPa~0.7MPa (Outside of Supply Scope) 06mm PU Tubing 850 mm (L) x 700 mm (W) x 2030 mm (H) 220VAC 50Hz / 120VAC 60Hz 168 kg Instrument, Professional Software, Pedal Switch, LCD Monitor, Keyboard, Standard Configurations Mouse, Pneumatic Clamping System, Wireless Data Interface, Wireless Data Module, Micro-printer, Standard Sample Grip (25mm) Optional Parts Sample Cutter SetNote, High Gain Antenna, Installing Support Note: Clamp the whole sample into the sample grips...

 Open the catalog to page 3

All Labthink Instruments Co., Ltd. catalogs and technical brochures

  1. C610M

    3  Pages

  2. C690H

    4  Pages

  3. C130H

    4  Pages

  4. COF-P01

    2  Pages

  5. VAC-V2

    3  Pages

  6. C230H (2025)

    4  Pages

  7. C610H

    3  Pages

  8. C206H

    4  Pages

  9. C406H

    5  Pages

  10. C403H

    5  Pages

  11. C 681M

    1  Page

  12. C660B (2025)

    3  Pages

  13. C632M

    3  Pages

  14. C630H

    3  Pages

  15. C620H

    3  Pages

  16. C 640

    4  Pages

  17. C 660M

    3  Pages

  18. C306H (2025)

    4  Pages

  19. C203H

    4  Pages

  20. BTY-B3P

    2  Pages

  21. C360M

    4  Pages

  22. C632B

    3  Pages

  23. C190H

    3  Pages

  24. C390H

    4  Pages

  25. C360H

    4  Pages

  26. C660M

    3  Pages

  27. C303H

    4  Pages

  28. C106H

    5  Pages

  29. C640

    4  Pages

  30. MXD-02

    2  Pages

  31. CHY-C2A

    2  Pages

  32. C611B

    2  Pages

  33. CH130

    4  Pages

  34. C 631 H

    2  Pages

  35. C660 B

    3  Pages

  36. VAC-VBS

    3  Pages

  37. XYD-15K

    2  Pages

  38. C360

    4  Pages

  39. C631 H

    2  Pages

  40. FST-02

    2  Pages

  41. C681 M

    2  Pages

  42. C230

    4  Pages

  43. C631H

    2  Pages

  44. C612M

    3  Pages

  45. SLY-SI

    2  Pages

  46. C360 M

    4  Pages

  47. C611M

    2  Pages

  48. C330H

    4  Pages

  49. Leak Tester

    3  Pages

  50. Tensile Testers

    19  Pages

  51. FDI-01

    5  Pages

  52. DIN 75201

    2  Pages

  53. Abrasion Test

    2  Pages

  54. Torque Meter

    2  Pages

  55. Leak Detector

    2  Pages

  56. Torque tester

    2  Pages

  57. Impact tester

    2  Pages

  58. Gas Analyzer

    2  Pages

  59. TOQUE TESTER

    1  Page

Archived catalogs

  1. C611M

    2  Pages

  2. C306H

    3  Pages

  3. C230H

    4  Pages

  4. Leak Tester

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.