Catalogs >
Labthink Instruments Co., Ltd. >
C101B Gas Permeability Test System

C101B Gas Permeability Test System
3Pages

Catalog excerpts

C101B Gas Permeability Test System C101B Gas Permeability Test System is based on the differential pressure method, and is professionally applicable to the determination of gas transmission rate of plastic films, composite films, high barrier materials, sheets, and metal foils at different temperatures. The test system conforms to GB, ISO, ASTM and other international standards. Features note1 • Applicable to testing the permeability of various gases (exclude flammable, explosive and other hazardous gases) • Support temperature control to satisfy tests under different conditions (optional) • The processes of vacuumizing, pressure maintaining, start test and end test are automated. • Automatic and manual test mode. • Built-in high-quality stainless steel test cell with better sealing performance. • Imported manual isolation valve is adopted for better sealing performance and lower failure rate • Industrial computer appearance design, small size and fast cooling • Reference film is provided for quick calibration • The system adopts single-chip microcomputer control and can run independently • The test report can be exported in common formats such as EXCEL and PDF • Support micro printer, automatically print test data (optional) • Equipped with RS232 data interface, which can be connected to computer software for curve analysis, data storage, report printing, etc. (optional) Test principle The pre-conditioned specimen is mounted in the test cell as to form a sealed barrier between two chambers. The lower-pressure chamber (lower chamber) is firstly evacuated, followed by the evacuation of the entire cell. A flow of gas is thereafter introduced into the evacuated higher-pressure chamber (upper chamber) and a constant pressure (adjustable) difference is generated between the two chambers. The gas permeates through the specimen from higher pressure side into the lower pressure side. The gas permeability of the specimen can be obtained by analyzing the pressure changes in the lower chamber. Labthink Instruments Co., Ltd. 144 Wuyingshan Road, linan, P.R.China (250031) Phone: +86-531-85068566 FAX: +86-531-85062108 Labthink International, Inc. 200 River's Edge Drive, Medford, MA, 02155, U.S.A. Phone:+1-617-830-2190 FAX: +1-781-219-3638 www.labthink.com

Open the catalog to page 1

Gas transmission rate test of various plastic films, paper-plastic composite Films films, coextruded films, aluminized films, aluminum foils, aluminum foil Applications composite films, glass fiber aluminum foil composite films and many others Gas transmission rate test of PP, PVC and PVDC sheets, metal foils, rubber Sheets pads, silicon wafers and other sheet materials Table 1: Test parameters C101B Parameters/Model Test range Test temperature Temperature resolution Temperature fluctuation Vacuum Degree of Test Chamber Pressure difference GMP Computer System requirement Additional...

Open the catalog to page 2

Standard test area O2\ N2X CO2 etc. (Outside of supply scope) Port Size Instrument Dimension Power Supply Table 3: Product Configuration Standard Configuration Optional Parts Instrument mainframe, vacuum pump (China), sampler, vacuum grease, ®6 mm PU tubing Professional software, TC03 temperature control device, GMP Computer System requirement, Micro-printer Note 1: The described product functions are subject to the specification in "Technical Parameters” "Table 1: Test Parameters". Note 2: The parameters in the table are measured in Labthink laboratory by professional operators according...

Open the catalog to page 3