video corpo

Battery diaphragms gas permeability test system
2Pages

{{requestButtons}}

Catalog excerpts

Battery diaphragms gas permeability test system - 1

PERME® BTY-B2P Gas Permeability Tester BTY-B2P is based on the differential pressure method, and is professionally applicable to the determination of gas permeability of battery diaphragms, breathable films and other relative polymer products. Professional Technology        3 equivalent specimens can be tested simultaneously with the average value as test result The system supports unit conversion function to meet user’s requirements for special test The instrument is controlled by computer with automatic test process Two test modes of proportional and standard modes are available Customization of test functions is available for special test materials Equipped with RS232 port for convenient data transfer Supports LystemTM Lab Data Sharing System for uniform and systematic management of test results and test reports Test Principle Under certain temperature and humidity, a constant gas differential pressure is generated between the two sides of specimen. The gas transmission rate and other parameters can be obtained by analyzing and calculating pressure changes in the lower pressure side. This test instrument conforms to the following standards: ISO 5636, SJT 1071.9 Applications This instrument is applicable to the determination of gas permeability of: Basic Applications Test the gas permeability of battery diaphragms, breathable films and other relative polymer products. Technical Specifications Specifications Film Test Test Range Pressure Range 0~20 KPa (customization is available for others) Specimen Size Test Area

Open the catalog to page 1
Battery diaphragms gas permeability test system - 2

O2, N2, CO2 and 99.9% dry gas (outside of supply scope) Port Size Power Supply Instrument Dimension Net Weight Configurations Standard Configurations Instrument, Professional Software, Fast Quantitative Filter Paper, Sampling Plate and Vacuum Grease Optional Parts Vacuum Grease 1. The gas supply port of the instrument is Φ4 mm PU tubing; 2. Customers will need to prepare for gas supply. Please Note: Labthink is always dedicated to the innovation and improvement of product performance and function. Therefore, technical specifications are subject to change without further notice. Please visit...

Open the catalog to page 2

All Labthink Instruments Co. catalogs and technical brochures

  1. DIN 75201

    2 Pages

  2. Torque Meter

    2 Pages

  3. Gas Analyzer

    2 Pages

  4. TOQUE TESTER

    1 Pages

Archived catalogs

  1. Leak Tester

    2 Pages